A high specific speed centrifugal pump is used in the situation of large flow and low head. Centrifugal pump parameters need to be optimized in order to raise its head and efficiency under off-design conditions. In this study, the orthogonal experiment design method is adopted to optimize the performance of centrifugal pump basing on three parameters, namely, blade outlet width b2, blade outlet angle β2 and blade wrap angle φ. First, the three-dimensional model of the centrifugal pump is established by CFturbo and SolidWorks. Then nine different schemes are designed by using orthogonal table, and numerical simulation is carried out in CFX15.0. The final optimized combination of parameters is b2 = 24 mm, β2 = 24°, φ = 112°. Under the design condition, the head and efficiency of the optimized centrifugal pump are appropriately improved, the increments of which are 0.74 m and 0.48%, respectively. However, the efficiency considerably increases at high flow rates, with an increase of 6.9% at 1.5 Qd. The anti-cavitation performance of the optimized centrifugal pump is also better than the original pump. The results in this paper can provide references for parameter selection (b2, β2, φ) in the centrifugal pump design.
1 January 2018 in Advances in Materials Science and Engineering
There are some issues that should be solved like load shock, vibration, and uneven load distribution during transmission of involute spur gears. However, common modification methods such as axial modification as well as profile modification could not solve these problems once for all. Hence, a novel method of comprehensive modification was proposed, and the evaluation methodology of transmission performance was drawn up too. Changing modification parameters can control transmission performance of gear unit, which can generate many different modification ways. Besides, based on the orthogonal experiment method and evaluation methodology, optimal modification ways can be chosen for gear pairs working in different conditions. Taking a set of spur gear pair as an example, an ideal modification way was obtained. In addition, analysis results verified that conducting comprehensive modification could enhance the meshing performance once for all.
7 August 2019 in The International Journal of Advanced Manufacturing Technology
In this study, a fractional-order food chain model with disease and two delays is proposed. The existence conditions for a positive equilibrium point are given, and the stability conditions without the effects of delays are established. The effects of a single time delay and two time delays are discussed, the bifurcation and stability criteria are obtained, and the bifurcation points are calculated. To support the theoretical analysis, numerical simulations are presented.
1 January 2017 in Mathematical Problems in Engineering
With the help of a stochastic bounded real lemma, we deal with finite horizon H2/H∞ control problem for discrete‐time MJLS, whose Markov chain takes values in an infinite set. Besides, a unified control design for H2, H∞, and H2/H∞ is given.