Polymerized aluminum magnesium chloride (PAMC) flocculant was prepared from gangue as a raw material, and the effects of pH, the polymerization time, and the polymerization temperature on the performance of the PAMC were investigated by a one-factor test, based on which, orthogonal experiments (three-factor and two-level) were conducted to optimize the relevant parameters. Meanwhile, FTIR and SEM were used to characterize the polymerized aluminum magnesium chloride, and the sample was applied in printing and dyeing wastewater treatment. The results showed that a pH value of 2.2 and a reaction at 60 °C for 4.5 h were the optimal preparation conditions; the characterization analysis showed that the synthesized product was polymerized aluminum magnesium chloride; the turbidity removal rate of the PAMC for printing and dyeing wastewater was increased by 2.1%, the COD removal rate was increased by 3.1%, the ammonia nitrogen removal rate was increased by 2.1%, and the chromaticity removal rate was increased by 9.2% compared with that of PAC.
Coal mine acid drainage is a type of industrial wastewater generated in the process of coal production and utilization that has a low pH and contains a small amount of organic matter and SO42−, which is harmful to the environment. The ·OH scavenger was used to optimize the grounded electrode atomized corona discharge (GEACD) technology for the treatment of coal mine acidic wastewater. The effects of various factors on the discharge effect were investigated, and the optimal operating scheme for the subsequent test was determined as 35 mm distance between barrel electrodes, 0.6 mm diameter of wire electrodes, and a flow rate of 45 mL/min. The effects of discharge voltage, discharge time, and ·OH scavenger on COD removal rate and pH in coal mine acid drainage were also investigated. The results showed that at the optimum discharge voltage of 12 kV, discharge time of 66 min, and SO42− to ethanol concentration ratio of 1, the COD value decreased from 152.84 mg/L to 43.27 mg/L, and the pH value increased from 5.6 to 6.1.