Construction of S-scheme heterojunctions can effectively limit the recombination of photogenerated e− and h+, thus improving photocatalytic activity. Therefore, S-scheme ZnO/BiOCl (molar ratio = 1:2) n–n heterojunctions were synthesized via a hydrothermal–hydrolysis combined method in this study. The physical and chemical properties of the ZnO/BiOCl heterojunctions were characterized by XRD, XPS, SEM, TEM, DRS, N2 adsorption–desorption and ESR. Additionally, the photoelectric performances of ZnO/BiOCl heterojunctions were investigated with TPR, M–S plot and EIS. The results show that photocatalytic degradation of NOR by ZnO/BiOCl reached to 94.4% under simulated sunlight, which was 3.7 and 1.6 times greater than that of ZnO and BiOCl, respectively. The enhanced photodegradation ability was attributed to the enhancement of the internal electric field between ZnO and BiOCl, facilitating the active separation of photogenerated electrons and holes. The radical capture experiments and ESR results illustrate that the contribution of reactive species was in descending order of ·OH > h+ > ·O2− and a possible mechanism for the photodegradation of NOR over S-scheme ZnO/BiOCl heterojunctions was proposed.
S-scheme Fe2O3/g–C3N4 heterojunctions were successfully fabricated by the ultrasonic assistance method to remove norfloxacin (NOR) under visible light irradiation. The synthesized catalysts were well studied through various techniques. The obtained Fe2O3/g–C3N4 heterojunctions exhibited an optimal photocatalytic degradation of 94.7% for NOR, which was 1.67 and 1.28 times higher than using Fe2O3 and g–C3N4 alone, respectively. In addition, the kinetic constant of NOR removal with Fe2O3/g–C3N4 composites was about 0.6631 h−1, and NOR photo-deegradation was still 86.7% after four cycles. The enhanced photocatalytic activity may be mainly attributed to the formation of S-scheme Fe2O3/g–C3N4 heterojunctions with built-in electric fields, which were beneficial to the separation and transfer of photostimulated charge carriers. Furthermore, a possible photo-degradation mechanism of NOR for S-scheme Fe2O3/g–C3N4 heterojunctions is described.
CeVO4-V2O3 composites were prepared by simple hydrothermal method, and the effects of ethylene glycol(EG) on the products were studied by XRD, N2 adsorption–desorption, SEM, EDS, XPS, PL and UV-vis spectra. The characterization reveals a slight decrease in surface area and a slight enhancement of visible light absorption in the final sample, while the crystalline phase, morphology and separation efficiency of the collective carriers are severely affected by the EG. At the same time, the photocatalytic effect of CeVO4-V2O3 composites was evaluated by the degradation rate of methylene blue (MB) under simulated visible light. The sample for 10 mL EG obtained the highest efficiency of 96.9%, while the one for 15 mL EG showed the lowest efficiency of 67.5% within 300 min. The trapping experiments and ESR experiment showed that the contribution of active species to the photocatalytic degradation of MB was ∙OH > h+ > ∙O2− in descending order, and a possible degradation mechanism was proposed.
Fe2O3/g-C3N4 nano-heterostructures for photocatalytic degradation of NOR (norfloxacin) were successfully prepared by combining co-precipitation and calcination methods. The g-C3N4, Fe2O3, and different composite ratios of Fe2O3/g-C3N4 (FeCNs) were characterized by XRD, SEM, XPS, UV-vis DRS, PL, and electrochemical tests, and the mechanism of photocatalytic degradation of NOR was analyzed. The results indicated that the semiconductor was attached to the surface of g-C3N4 in the form of α-Fe2O3 crystal with good crystalline structure. The composite of Fe2O3 with g-C3N4 increased the specific surface area of the material, effectively reduced the band gap, strengthened the photogenerated e−/h+ pair separation, and improved the photocatalytic performance of the composite. The photocatalytic degradation of NOR was consistent with the quasi-primary reaction kinetic model. Among them, FeCN-25wt% showed the optimal photocatalytic degradation of NOR (72.3%) with the largest degradation rate (k = 0.00900 min−1). The Fe2O3/g-C3N4 composite structure is inferred to be a Z-type heterojunction.
In this paper, BiVO4/CeVO4 composites were synthesized by hydrothermal method for photodegradation of norfloxacin (NFX) under visible light irradiation. The structure, morphologies, and optical properties of as-prepared samples were studied with XRD, SEM, BET, DRS, PL, XPS, EIS, and TPR. The results of the photocatalytic experiments demonstrated that the BiVO4/CeVO4 composites had more degradation performance of NFX compared with pure BiVO4 or CeVO4, which was attributed to the increased absorbance intensity of visible light, the reduced carrier coincidence rate, and the improved charge separation efficiency. Furthermore, the possible mechanism of the NFX degradation on BiVO4/CeVO4 composites under visible light irradiation was proposed according to the photocatalytic activity and free radicals trapping experiments.
Polymerized aluminum magnesium chloride (PAMC) flocculant was prepared from gangue as a raw material, and the effects of pH, the polymerization time, and the polymerization temperature on the performance of the PAMC were investigated by a one-factor test, based on which, orthogonal experiments (three-factor and two-level) were conducted to optimize the relevant parameters. Meanwhile, FTIR and SEM were used to characterize the polymerized aluminum magnesium chloride, and the sample was applied in printing and dyeing wastewater treatment. The results showed that a pH value of 2.2 and a reaction at 60 °C for 4.5 h were the optimal preparation conditions; the characterization analysis showed that the synthesized product was polymerized aluminum magnesium chloride; the turbidity removal rate of the PAMC for printing and dyeing wastewater was increased by 2.1%, the COD removal rate was increased by 3.1%, the ammonia nitrogen removal rate was increased by 2.1%, and the chromaticity removal rate was increased by 9.2% compared with that of PAC.