This paper analyzes the influence of moonpools on the hydrodynamic performance of drillships using the Reynolds-averaged Navier–Stokes (RANS) method. A three-dimensional numerical wave tank is established to realize regular waves and to perform prediction and validation of the KCS ship’s performance in calm water and head seas. After selecting optimal moonpool configurations under calm conditions, seakeeping analyses for a rectangular-moonpool drillship in waves and drag-reduction optimization in calm water and head seas are conducted. The comparative analysis shows that in calm-water navigation, different moonpool shapes lead to different added-resistance effects, and the drillship with a rectangular moonpool shows overall better performance in resistance and running attitude; the added resistance due to the moonpool mainly originates from the additional residual resistance. The sustained energy supply to the clockwise vortex within the moonpool is maintained by the continuous mass exchange between the water flow beneath the ship’s bottom and the water inside the moonpool. Under regular waves, the presence of a moonpool leads to an increase in the total resistance experienced by the drillship. A flange device can effectively reduce the mean amplitude of waves inside the moonpool, and when the flange is installed 10 mm above the still water level with a length of 120 mm, its drag-reduction effect is better. The flange structure can effectively improve the hydrodynamic characteristics of the drillship in waves. The numerical conclusions provide a reference value for the engineering application of drillships with moonpool structures.
This study analyzes the hydrodynamic performance of a V-type wave dissipation system and amphibious landing equipment under different combined fields using the Reynolds-averaged Navier–Stokes (RANS) method. A three-dimensional numerical wave tank is established to simulate regular waves and validate the performance of an airbag-type floating breakwater. This study evaluates the optimal hydrodynamic performance of a V-type wave dissipation system under various configurations in a wave-only field and subsequently compares the efficacy of the better-performing system across multiple environmental conditions. The results show that the V-type wave dissipation system in the configurations of 30° and 45° angles is more favorable for the flow field and the amphibious landing equipment behind it. Compared to the wave-only condition, the time histories of wave heights under both wave-current and wind-wave conditions present an obvious phase advancement. In the wave-current field, a following current reduces the wave height and shortens the wave period. Conversely, in the wind-wave field, a following wind velocity leads to a certain increase in wave height while exerting minimal impact on the wave period. Compared to the wave-only condition, the peak and trough values of the wave height monitoring points in the combined wind-wave-current field show an increasing trend, with a significant increase in resistance and a shorter resistance period for the amphibious landing equipment behind the V-type wave dissipation system. This study shows that the selected V-type wave dissipation system proves to be more effective in wave-only and wave-current conditions, providing valuable references for the engineering application of this system.