This study investigates the influence of wave attenuation systems on ship sheltering characteristics in numerical wave tanks. The Reynolds-averaged Navier–Stokes equations are used to solve the viscous flow field. A three-dimensional numerical wave tank is established to accurately simulate regular waves, and validation calculations are conducted for the wave attenuation performance of an airbag-type floating breakwater system. The accuracy and feasibility of the bidirectional fluid–structure interaction method are verified through predictions of the free-end displacement response of a cantilever plate. Subsequently, a computational study is caried out to investigate the sheltering characteristics of the ship protected by both rigid and flexible wave attenuation systems. The results indicate that under the protection of a linear sheltering configuration, both rigid and flexible wave attenuation systems exhibit significant effectiveness in attenuating short-period waves. As the wave period T increases, the wave attenuation performance of both rigid and flexible wave attenuation systems gradually declines. Under identical working conditions, the rigid wave attenuation system demonstrates notably superior performance compared to the flexible system. Furthermore, under the protection of the rigid wave attenuation system, the ship's pitch motion response to short-period waves exhibits a distinct double-peak phenomenon. As the wave period T increases, the ship's pitch motion response exhibits nonlinear characteristics under both rigid wave attenuation system and nonattenuation conditions. These quantitative findings elucidate the hydrodynamic characteristics of the wave attenuation system and in doing so provide valuable references for engineering applications, particularly for flexible wave attenuation structures.
7 December 2017 in International Shipbuilding Progress
This paper adopts virtual tank experimental technology to study ship rapidity performance. Based on RANS method, a new method is put forward to predict the speed and power performance of full scale ship. The open water performance of propeller model,
According to the forming reason and classification of the hull resistance, this paper puts forward a three dimensional RANS method to solve the wave-making resistance. The obtained numerical results are compared with the results obtained from numeric
This paper analyzes the influence of moonpools on the hydrodynamic performance of drillships using the Reynolds-averaged Navier–Stokes (RANS) method. A three-dimensional numerical wave tank is established to realize regular waves and to perform prediction and validation of the KCS ship’s performance in calm water and head seas. After selecting optimal moonpool configurations under calm conditions, seakeeping analyses for a rectangular-moonpool drillship in waves and drag-reduction optimization in calm water and head seas are conducted. The comparative analysis shows that in calm-water navigation, different moonpool shapes lead to different added-resistance effects, and the drillship with a rectangular moonpool shows overall better performance in resistance and running attitude; the added resistance due to the moonpool mainly originates from the additional residual resistance. The sustained energy supply to the clockwise vortex within the moonpool is maintained by the continuous mass exchange between the water flow beneath the ship’s bottom and the water inside the moonpool. Under regular waves, the presence of a moonpool leads to an increase in the total resistance experienced by the drillship. A flange device can effectively reduce the mean amplitude of waves inside the moonpool, and when the flange is installed 10 mm above the still water level with a length of 120 mm, its drag-reduction effect is better. The flange structure can effectively improve the hydrodynamic characteristics of the drillship in waves. The numerical conclusions provide a reference value for the engineering application of drillships with moonpool structures.
This study investigates the influence of seabed topography on the hydrodynamic performance of artificial reefs by incorporating a variable-bottom offshore bar. Numerical results show that positioning the reef in front of the offshore bar increases internal upwelling velocity compared to a no-bar scenario. The closer the reef is to the offshore bar, the stronger the upwelling within the reef structure. When the reef is placed behind the offshore bar, upwelling velocity increases; however, positioning it too close to the front results in a free surface elevation similar to the no-reef condition. Increasing the distance between the reef and the offshore bar further enhances wave dissipation. We also found that placing the reef in front of the offshore bar provides dual benefits: improved wave energy dissipation and better ecological performance. Additionally, increasing reef height intensifies flow field disturbance and significantly amplifies hydrodynamic forces, particularly when the D/h ratio exceeds 1.0. Thus, it is recommended that the D/h ratio remain at or below 1.0 to ensure structural stability and longevity. Finally, analysis of the offshore bar front slope indicates that slopes ranging from Z0/d = 1/2 to Z0/d = 1/1 achieve an optimal balance between upwelling velocity and structural loads.