GaN-based electronics have witnessed an increase in both research and industrial activities, first spurred by the successful demonstration of GaN LEDs, and are now expanding into transistors and photovoltaic cells. In addition, GaN/GaAs heterojunction devices are currently receiving much interest. In this study, we conduct rigorous optoelectronic computational analysis of cubic phase GaN (c-GaN)/GaAs heterojunction solar cells for a comprehensive understanding of the cell. We utilize a compositionally graded GaAs1–xNx buffer layer to reduce defect states at the heterojunction interface caused by a significant lattice mismatch between c-GaN and GaAs. Furthermore, we enhance the performance of the cell by optimizing GaAs absorber layer thickness and c-GaN buffer layer doping concentration. Moreover, we examine the effects of GaAs1–xNx/GaAs interface recombination velocity (IRV) on the cell. Overall, we achieve ~23% power conversion efficiency within 1.25- $\mu \text{m}$ thin-film GaAs at low GaAs1–xNx/GaAs IRV. The analyses and results presented in this study demonstrate the vast application potential of c-GaN/GaAs heterojunction in high-efficiency solar cells.
We present a novel plumbene/hexagonal boron nitride (hBN) heterobilayer with intriguing structural, electronic, and optical properties. Three different stacking patterns of the bilayer are proposed and studied under the framework of density functional theory using first-principles calculations. All the stacking configurations display direct band gaps ranging from 0.399 eV to 0.432 eV in the presence of spin orbit coupling (SOC), whereas pristine plumbene possesses an indirect band gap considering SOC. Based on binding energy calculations, the structures are found to be stable and, consequently, feasible for physical implementation. All three structures exhibit low effective mass, ∼0.20m0 for both electrons and holes, which suggests improved transport characteristics of the plumbene/hBN based electronic devices. The projected density of states reveals that the valence and conduction band peaks around Fermi energy are dominated by the contributions from the plumbene layer of the heterobilayer. Therefore, the hBN layer is a viable candidate as a substrate for plumbene since charge carriers will only travel through the plumbene layer. Biaxial strain is employed to explore the dependence of the electronic properties like bandgap and effective mass of the heterobilayer on applied strain. We find that applied biaxial compressive strain can induce switching from the semiconducting to metallic state of the material. In addition, we explore various optical characteristics of both pristine plumbene and plumbene/hBN. The optical properties of the heterobilayer signify its potential applications in solar cells as well as in UV photodetectors.
Three proposed quantum spin Hall insulators based on chemically functionalized plumbene monolayer are found to possess giant bulk band gaps, which are strain-tunable. Topological non-triviality remains intact even upon introduction of a substrate.
We present a Genetic Algorithm (GA)-based inverse design framework for creating a single-layer, fabrication-compatible dielectric nano-patterned surface that enables efficient color routing in both transmissive and reflective optical systems. Unlike traditional multilayer or absorption-based color filters, the proposed structure employs a fabrication-compatible architecture that spatially routes red, green, and blue light into designated output channels, significantly enhancing light utilization and color fidelity. The design process integrates a GA with full-wave finite-difference time-domain (FDTD) simulations to optimize the structural pillar height distribution, using a figure of merit that simultaneously maximizes optical efficiency and minimizes spectral crosstalk. For CMOS image sensor-scale designs, the nano-patterned surface achieved peak optical efficiencies of 76%, 72%, and 78% for blue, green, and red channels, respectively, with an average efficiency of 75.5%. Parametric studies further revealed the dependence of performance on pillar geometry, refractive index, and unit cell scaling, providing practical design insights for scalable fabrication using nanoimprint or grayscale lithography. Extending the approach to reflective displays, we demonstrate tunable-mirror-based architectures that emulate electrophoretic microcapsules, achieving efficient color reflection and an expanded color gamut beyond the sRGB standard. This single-layer, inverse-designed nano-patterned surface offers a high-performance and fabrication-ready solution for compact, energy-efficient imaging and display technologies.