An immersed boundary method for particulate flow in an Eulerian framework is utilized to examine the effects of complex human motion on the transport of trace contaminants. The moving human object is rendered as a level set in the computational domain, and realistic human walking motion is implemented using a human kinematics model. A large eddy simulation (LES) technique is used to simulate the fluid and particle dynamics induced by human activity. Parametric studies are conducted within a Room-Room and a Room-Hall configuration, each separated by an open doorway. The effects of the average walking speed, initial proximity from the doorway, and the initial mass loading on room-to-room contaminant transport are examined. The rate of mass transport increases as the walking speed increases, but the total amount of material transported is more influenced by the initial proximity of the human from the doorway. The Room-Hall simulations show that the human wake transports material over a distance of about 8 m. Time-dependent data extracted from the simulations is used to develop a room-averaged zonal model for contaminant transport due to human walking motion. The model shows good agreement with the LES results. The effect of human activity on contaminant transport may be important in applications such as clean or isolation room design for biochemical production lines, in airborne infection control, and in entry/exit into collective protection or decontamination systems. The large eddy simulations (LES) performed in this work allow precise capturing of the local wakes generated by time-dependent human motion and thus provide a means of quantifying contaminant transport due to wake effects. The LES database can be used to develop zonal models for the bulk effects of human-induced contaminant transport. These may be incorporated into multi-zone infiltration models for use in threat-response and exposure mitigation studies.
Stream-traced inlets offer superior compression efficiency for scramjet engines and are strong prospects for practical application. However, only limited experimental information is available on the subdesign performance of these inlets. In this study, the operation of a stream-traced truncated-Busemann inlet with a design point of Mach 5.5 and a physical contraction ratio of [ ] is experimentally investigated in a Mach 4.0 flow. Several nonintrusive flow measurement techniques are employed to provide a thorough understanding of the intricate flowfield within these inlets at various operation conditions. The measurements include surface pressure, mean streak-line patterns, off-body velocity fields, and qualitative gas density fields. Together, these datasets provided a unique understanding of the flow evolution and load distribution within the inlet and isolator with and without application of an external backpressure. The facility effects on the inlet operation are also explored. Without appropriate boundary-layer conditioning, the wind-tunnel starting shock could not be swallowed by the inlet; this is termed a “failed start” operation. During the failed start operation the inlet flowfield and surface pressure field, even without external backpressure, exhibited strong similarities with an unstarted inlet. The failed start operation enabled a unique lens to the flowfield in the unstarted inlet throat that could not be otherwise obtained due to optical constraints.
Leading-edge-vortex (LEV) formation often characterizes the unsteady flows past airfoils and wings. Recent research showed that initiation of LEV formation on airfoils in two-dimensional flow is closely tied to the criticality of the so-called leading-edge suction parameter (LESP). To characterize the LEV initiation on wings in three-dimensional flow, a large set of pitching wings was studied using Reynolds-averaged Navier–Stokes computations (computational fluid dynamics, CFD). The CFD results showed that the pitch angle and spanwise location for LEV initiation varied widely between the different wings. The same cases were also analysed using an unsteady vortex-lattice method (UVLM), which assumes attached flow. Low-order prediction of LEV initiation is assumed to occur at the pitch angle when the UVLM-calculated LESP at any point on the wing span first becomes equal to the pre-determined critical LESP for the airfoil. For all the cases, the predicted pitch angles and spanwise locations for LEV initiation from the low-order method agreed excellently with the corresponding CFD predictions. These observations show that LEV initiation on finite wings is governed by criticality of leading-edge suction, enabling the prediction of LEV initiation on an unsteady finite wing using attached-flow wing theory and the critical LESP values for the airfoil sections.
31 May 2023 in Theoretical and Computational Fluid Dynamics