A tailored three-dimensional integrated accelerometer theoretical model is established, a corresponding accelerometer with higher sensitivity is proposed and demonstrated experimentally. Based on the idea that the three-dimensional accelerometer’s three main axis remain highly sensitive, consistent, and share one inertial body, a three-dimensional sensitive and consistent integrated model with high symmetry is established, and a cleverly designed method of encapsulating a fiber Bragg grating (FBG) that is sensitive to only one direction. High-performance accelerometer with higher sensitivity and lower cross-talk has been designed and fabricated. The experimental results obtained show that the bandwidths of the sensor in the X, Y, and Z directions range from 20 Hz to 190 Hz, 20 Hz to 205 Hz, and 30 Hz to 205 Hz, respectively, and the sensitivities of the flat range in the X, Y, and Z directions range from 112.5 to 217.0 pm/g, 104.4 to 207.7 pm/g, and 98.6 to 198.0 pm/g. It shows that the parameters of this type sensor have good consistency in the three directions, which is in line with the design concept. Therefore, this type of sensor has potential theoretical significance and practical application in the field of three-dimensional signal detection.
A novel FBG flow sensor with high sensitivity is proposed in this paper, which consists of a target disk, a solid beam, an L-shaped lever structure and dual FBG. The dual FBG configuration can simultaneously detect temperature and flow velocity. The relationship between the flow velocity and the FBG central wavelength is theoretically derived, and simulation analysis verifies the feasibility of the sensor and optimizes its structure. Then, the sensing performance of the sensor is experimentally demonstrated. In measurement, the flow resolution reaches 0.024 L/s in the flow velocity range of 500-2500 L/h, and the temperature sensitivity reaches 25.7 pm/°C in the temperature range of 30-210°C. The proposed FBG flow sensor in this paper offers a perspective for measuring the flow velocity and temperature of oil and gas wells or oil pipelines.