Swagat Dwibedi

Mr. Swagat Dwibedi


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2018 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
SDSwagat Dwibedi
Swagat Dwibedi
Neelesh Kumar JainNeelesh Kumar Jain
Neelesh Kumar Jain
Sunil PathakSunil Pathak
Sunil Pathak
Present work is focused on the autogenous joining of tailored blanks, that is, sheets of different thickness but of the same material (austenitic stainless steel grade SS 316L). A thin sheet (1mm) and a thick sheet (3 mm) were joined autogenously using Indigenously developed micro-plasma transferred arc (µ-PTA) process. Effects of current, torch travel speed and stand of distance (SOD) were investigated to determine their optimum levels of joint tensile strength. The produced joint was characterized using different methods such as optical microscopy, scanning electron microscopy, uniaxial tensile tests, Vicker’s microhardness, and energy dispersive X-ray analysis. It was found that (19.4 A, 63 mm/min, 1.3 mm), (19.6 A,80 mm/min, 1.3 mm) and (19.8 A, 100 mm/min, 1.3 mm) with values of plasma flow rate at 0.4 Nl/min and shielding gas flow rate at 5 Nl/min, yielded sound weld Joint. Absence of heat affected zone was confirmed by very small variation in Vickers microhardness values across the fusion zone. This study establishes the capability of microplasma transferred arc process for joining stainless sheets of different thickness without any filler material and producing very good quality joint using much less power as compared to conventional fusion joining processes.


4 June 2021 in Advances in Materials and Processing Technologies
Verified
Journal Article
Closed access
BKBikash Kumar
Bikash Kumar
SDSwagat Dwibedi
Swagat Dwibedi
SBSwarup Bag
Swarup Bag
MMManmohan Mahapatra
Manmohan Mahapatra
RGRoshan Gupta
Roshan Gupta
The current experimentation emphasises on the diversification in metallurgical transformation under solution treatment, which governs the solidification rate and can trigger the final mechanical behaviour of the welded structure. In the present work, a thin sheet (750 μm) of Ti-6Al-4V alloy is joined using resistance spot welding process in overlap configuration at varied weld time cycles of 30, 50, and 70. Further, in order to explore metallurgical aspects and associated influence on mechanical behaviour, post-weld heat treatment (PWHT) is performed. The weld pad is heated up to β-transus temperature (~915°C) for 60 min, consequently cooled by water quenching method. It is opined that the welding heterogeneity that arises at welding can be homogenised by gradual heating and cooling cycles in the PWHT cycle. Upon increasing weld time from 50 → 70 cycles, mechanical properties are improved. Therefore, 70 cycles is regarded as the optimised weld time. Coarsening of α-lath within the prior β-grain boundary is confirmed in the weld zone of as-welded specimens. On the other hand, application of solution treatment found is to be advantageous since it changes the mode of failure from interfacial to pullout, which is always desirable. Improved tensile-shear load bearing capacity (TSLBC) and extension are indicated by pullout failure accompanied by solution treatment.

6 June 2021 in Advances in Materials and Processing Technologies
Verified
Journal Article
Closed access
SDSwagat Dwibedi
Swagat Dwibedi
SBSwarup Bag
Swarup Bag
Incorrect selection of process parameters corresponds to 45 % of the entire weld imperfections. Selection of process parameters becomes even more critical when the joining is reduced to micro-level. The current experimentation and computational work emphasise the influence of process parameters on joint characteristics of AISI316L and AISI310 thin sheets. Thin sheets fabricated by a micro-plasma arc welding process at different process parameters (PP) PP1 (~524 J/cm), PP2 (~629 J/cm), and PP3 (~733 J/cm) are experimentally analysed to study the variation in microstructural morphology, mode of solidification, and impact toughness. The dependence of the temperature gradient (G) and solidification velocity (R) on the process parameters are also established. Microscopic images confirm the presence of equiaxed and cellular structure depending on the G/R ratio. As the cooling rate decreases, the transformation from δ-ferrite ⟶ γ-austenite is restricted, which changes the δ-ferrite percentage for different weld conditions. Elemental analysis is used to evaluate the Creq/Nieq ratio that predicts the solidification mode using the Schaeffler diagram. The outcome of the present investigation indicates that the highest G/R and maximum G*R corresponds to enhanced joint behaviour due to favourable changes in the metallurgical properties.