Offshore infrastructure often interacts cyclically with the seabed over the operational life of a project. Previous research on the evolution of soil’s undrained strength under long-term, large-amplitude cyclic loading has focused on contractile clays and demonstrated that this cyclic interaction can lead to the initial generation and later dissipation of positive excess pore pressure in the soil. This process generally leads to an initial strength reduction, with subsequent densification and soil strength gains that can have consequences on the performance of seabed infrastructure during its design life. In this paper, new experimental data from T-bar penetrometer testing in kaolin and reconstituted Gulf of Mexico clays is presented. The data illustrate how the stress history, quantified via the overconsolidation ratio, affects soil strength changes during large-amplitude cyclic loading. The experiments explore both long-term continuous loading cycles and episodic loading with packets of undrained cycles followed by quiescent consolidation periods. A critical state-based framework is used to interpret the experimental data and provide predictions of the long-term steady-state strength of both soils as a function of the initial in situ state of the soil.
The time dependence of pile shaft friction in clay is well known. However, our understanding of the mechanisms causing capacity increase after consolidation is limited and there is considerable uncertainty on the magnitude of long-term gains in friction that can be relied upon. Design for cases involving delayed loading or re-use of foundations would benefit from increased certainty, as would estimation of loads for decommissioning of offshore piled jackets. This paper adds new insights into the ageing process of shaft friction for displacement piles using results obtained from a systematic experimental study involving model pile tests performed in a range of reconstituted clays. These laboratory-based results are reviewed in the context of the key physical properties of each clay, with results compared to field test data from three sites. Favourable comparisons with the field data suggest that the laboratory-based, clay-specific approach employed in the study can be used to estimate pile ageing factors for design. The results supported by existing numerical studies enable identification of important factors controlling pile ageing for displacement piles in clay, allowing greater certainty in the estimation of capacity gains.
1 September 2025 in ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering