In multiple Reconfigurable Intelligent Surface (RIS)-assisted Multiple Input Multiple Output (MIMO) communication systems, the estimation of multi-hop cascaded channels poses significant challenges. This letter proposes a novel semi-blind receiver to address this problem originally. It shows that the received signals correspond to the generalized nested Parallel Factor (PARAFAC) model, which can be decomposed into three-dimensional (3D) PARAFAC models. We transform the joint channel estimation and symbol detection problem into several least square subproblems by deriving two cost functions for each 3D PARAFAC model, which are solved using the proposed SALS method. Simulation results demonstrate the effectiveness of the proposed algorithm.
Reconfigurable intelligent surfaces (RISs) are a promising technology for sixth-generation (6G) wireless networks. However, a fully passive RIS cannot independently process signals. Wireless systems equipped with it often encounter the challenge of large channel matrix dimensions when acquiring channel state information using pilot-assisted algorithms, resulting in high pilot overhead. To address this issue, this article proposes a semi-blind joint channel and symbol estimation receiver without a pilot training stage for RIS-aided multiple-input multiple-output (MIMO) (including massive MIMO) communication systems. In a semi-blind system, a transmission symbol matrix and two channel matrices are coupled within the received signals at the base station (BS). We decouple them by building two parallel factor (PARAFAC) tensor models. Leveraging PARAFAC tensor decomposition, we transform the joint channel and symbol estimation problem into least square (LS) problems, which can be solved by Alternating Least Squares (ALSs). Our proposed scheme allows duplex communication. Compared to recently proposed pilot-based methods and semi-blind receivers, our results demonstrate the superior performance of our proposed algorithm in estimation accuracy and speed.
Reconfigurable intelligent surfaces (RISs) are regarded as a transformative technique for future wireless networks. Currently, the majority of research efforts have focused on channel estimation scenarios in communication systems assisted by a single passive RIS. However, single-RIS-assisted systems suffer from limited coverage performance, with significant performance degradation observed in dense obstacle environments. To mitigate the adverse impacts imposed by environmental factors, a dual-RIS-assisted communication system exhibits superior adaptability to practical scenarios. This work focuses on investigating such a system. It is worth noting that fully passive RISs lack the capability to process signals independently. Furthermore, when employing pilot-aided algorithms to acquire channel state information (CSI), wireless systems often encounter challenges arising from large channel matrix dimensions, thereby leading to substantial pilot overhead. To address the aforementioned issues, this paper proposes a novel semi-blind channel estimation method for multiple-input multiple-output (MIMO) systems aided by double reconfigurable intelligent surfaces (D-RISs). Specifically, we construct two tensor models, namely the Parallel Factor (PARAFAC) model and the Parallel Tucker2 model, for the received signal in two separate stages. By means of tensor decomposition, the joint channel estimation and symbol detection problem is reformulated as a least squares problem and solved using a two-stage algorithm. In the first stage, the ALS algorithm is adopted to estimate the transmitted symbols and provide initialization for the second stage. Then, in the second stage, the TALS algorithm is employed to obtain the final estimation results of the three sub-channels. Simulation results verify the effectiveness of the proposed receiver.
Most current trackers utilize only the highest-level features to achieve faster tracking performance, making it difficult to achieve accurate tracking of small and low-resolution objects. To address this problem, we propose an end-to-end anchor-based multi-scale transformer tracking (AMTT) approach to improve the tracking performance of the network for objects of different sizes. First, we design a multi-scale feature encoder based on the deformable transformer, which better fuses the multilayer template features and search features through the self-enhancement module and cross-enhancement module to improve the attention of the whole network to objects of different sizes. Then, to reduce the computational overhead of the decoder while further enhancing the multi-scale features, we design a feature focusing block to compress the number of coded features. Finally, we introduce a feature anchor into the traditional decoder and design an anchor-based decoder, which utilizes the feature anchor to guide the decoder to adapt to changes in object scale and achieve more accurate tracking performance. To confirm the effectiveness of our proposed method, we conduct a series of experiments on different datasets such as UAV123, OTB100 and GOT10k. The results show that our adopted method exhibits highly competitive performance compared to the state-of-the-art methods in recent years.
Reconfigurable intelligent surface (RIS) demonstrates significant potential in millimeter-wave (mmWave) multiple-input multiple-output (MIMO) wireless communication systems. However, the introduction of RIS leads to a substantial number of parameters in the channel matrix, making channel estimation highly challenging. By exploiting the sparsity of mmWave channels, compressed sensing algorithms, such as the orthogonal matching pursuit (OMP) algorithm, can significantly reduce the pilot overhead. Nevertheless, traditional OMP algorithms typically require extensive prior knowledge about the number of effective paths, which is often difficult to obtain. To address this problem, we propose a novel multi-user joint correlation allocation (MUJCA) algorithm, which requires only minimal and easily measurable prior information. Our key idea is to divide the RIS coverage area into multiple sub-regions, each associated with a known number of scatterers, which is a pre-measured quantity, with users distributed within these sub-regions. Then, the MUJCA algorithm exploits joint correlation of multiple users to facilitate sparse channel recovery and transforms it back into the spatial channel. Simulation results show that the proposed MUJCA achieves higher channel estimation accuracy than existing benchmark algorithms.