Poly(lactic acid) (PLA)/starch composites have attracted considerable attention as promising eco-friendly materials due to their renewable origins and complementary properties. The system synergized benefits including cost reduction and enhancing biodegradation through filled with starch, and reducing moisture sensitivity by adding PLA. In recent years, PLA/starch composites have also emerged as functional materials for controlled-release applications, benefiting from their inherent phase-separated structures and distinct water solubility and degradation behaviors of the two components. By tailoring starch content and dispersion, starch-rich domains can serve as water-responsive pathways within the PLA matrix, enabling tunable release of functional substances from films or coatings. This concept has been successfully demonstrated in applications such as antimicrobial food packaging and slow-release fertilizer coatings. This review first outlines the fundamental aspects of PLA/starch composites, including microstructure, interfacial compatibility, and biodegradability. It then focuses on their design and performance as controlled-release systems, covering fabrication strategies, structure–property relationships, and evaluation methods. Finally, the advantages and limitations of current PLA/starch-based controlled-release materials are critically discussed, and future research directions are proposed to guide the development of sustainable, multifunctional materials for food packaging and agricultural applications.
In this work, polylactic acid (PLA)/poly(butylene adipate-coterephthalate) (PBAT) composites containing nanomagnetite particles were developed for electromagnetic shielding. The nanomagnetite particles acted not only as a conductive filler but also as a reinforced agent and compatibilizer for PLA/PBAT blends. The effect of surface treatments by the silicon coupling agent (SCA) under different pH conditions and with other substances (silica and dopamine (DA)) were investigated in particular. The composites were prepared by thermal mixing and characterized by Fourier-transform infrared spectroscopy (FTRI), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transparency electron microscopy (TEM) and tensile testing. The results show that the interface between the PBAT spheres and the PLA matrix was improved after the addition of magnetite particles treated with SCA or PDA. It is interesting to find that under acidic conditions, SCA acted more efficiently due to the chemical reaction of SCA with the hydroxyl groups on the surface of the magnetite particles, which resulted in chemical improvement. Tensile strength increased about 20%, while elongation also increased about 15%. The fracture surface under SEM clearly showed plastic deformation, which contributed to an improvement in mechanical properties, especially toughness.