In this paper, we have studied an additively manufactured metallic component, intended for ultra-high vacuum application, the exit-snout of the MACHINA transportable proton accelerator beam-line. Metal additive manufacturing components can exhibit heterogeneous and anisotropic microstructures. Two non-destructive imaging techniques, X-ray computed tomography and Neutron Tomography, were employed to examine its microstructure. They unveiled the presence of porosity and channels, the size and composition of grains and intergranular precipitates, and the general behavior of the spatial distribution of the solidification lines. While X-ray computed tomography evidenced qualitative details about the surface roughness and internal defects, neutron tomography showed excellent ability in imaging the spatial density distribution within the component. The anisotropy of the density was attributed to the material building orientation during the 3D printing process. Density variations suggest the possibility of defect pathways, which could affect high vacuum performances. In addition, these results highlight the importance of considering building orientation in the design for additive manufacturing for UHV applications. Graphical Abstract
The BLEMAB European project (BLast furnace stack density Estimation through online Muon ABsorption measurements), the evolution of the previous Mu-Blast European project, is designed to investigate in detail the capability of muon radiography techniques applied to the imaging of the inner zone of a blast furnace. In particular, the goal of this collaboration is to characterize the internal region (so-called cohesive zone) where the slowly downward-moving material begins to soften and melt, which plays an important role in the performance of the blast furnace itself. In this contribution, we describe the state-of-the-art of the muon tracking system which is currently being developed and installed at a blast furnace on the ArcelorMittal site in Bremen (Germany). Moreover, we will present the GEANT4 simulation framework devised for this application together with the simulation results. Finally, we will show the possible contribution of multiple scattering effects to such peculiar applications.
In the central area of a blast furnace, called “cohesive zone,” the high temperature up to 2000°C allows us to melt most of the materials in input. The performance of a blast furnace depends on the shape and density of the cohesive zone, and, therefore, its characteristics (i.e., location and extension) are important. Muography, being a passive and non-invasive technique, represents a valid alternative to the most common techniques in the steel industry for the blast furnace monitoring that involve the use of special probes capable of reaching very high temperatures, but which, however, are unable to reach this area before melting or functioning for a long time. The cohesive zone could be passively and continuously observed for a long time with muography and could be visible as a high-density anomaly inside the blast furnace. In this work, the BLEMAB (BLast furnace stack density Estimation through on-line Muon ABsorption measurements) European project (2020–2024) is described. The detectors, the two measurements performed and the first results on the density distribution showing the potential of the technique in the steel industry, will be presented. These results have then been compared with measurements performed in parallel with other techniques such as eMPVP (enhanced MultiPoint Vertical Probes) finding some compatibilities.
This work presents a compact, self-powered wireless CO2 sensing node for autonomous environmental monitoring. The system integrates a high-efficiency multijunction photovoltaic (PV) module, a 4000 F hybrid supercapacitor operating at 3.6–4.2 V, and a custom power management system in a LiPo-sized form factor. The PV module, composed of nine parallel triple-junction solar cells, achieves an average efficiency of 27% and delivers peak power at 4.26 V under 600 W/m2 irradiance. The sensing unit includes miniaturized CO2, humidity, and temperature sensors with LoRa-based wireless communication. The low-power NDIR CO2 sensor provides a resolution of 15–20 ppm and a response time of ~45 s. Week-long tests demonstrated fully autonomous operation with reliable 5 min data transmission, capturing diurnal CO2 variations associated with plant activity even under low irradiance. Energy storage occurs for irradiance levels ≥65 W/m2, and long-term simulations confirm stable supercapacitor voltage over yearly cycles. This work demonstrates a compact multijunction solar–hybrid supercapacitor platform capable of sustaining WSN for long-term, maintenance-free CO2 monitoring under real-world and low-irradiance conditions. Our results demonstrate that the sensing node can reliably monitor plant-driven CO2 dynamics, clearly resolving the expected photosynthesis–respiration cycles and their dependence on incident solar radiation, while simultaneously sustaining its energy budget under highly challenging illumination and transmission conditions.
10 January 2025 in International Journal of Modern Physics A