In recent decades, scientific and technological developments have continued to increase in speed, with researchers focusing not only on the innovation of single technologies but also on the cross-fertilization of multidisciplinary technologies. Unmanned aerial vehicle (UAV) technology has seen great progress in many aspects, such as geometric structure, flight characteristics, and navigation control. The You Only Look Once (YOLO) algorithm was developed and has been refined over the years to provide satisfactory performance for the real-time detection and classification of multiple targets. In the context of technology cross-fusion becoming a new focus, researchers have proposed YOLO-based UAV technology (YBUT) by integrating the above two technologies. This proposed integration succeeds in strengthening the application of emerging technologies and expanding the idea of the development of YOLO algorithms and drone technology. Therefore, this paper presents the development history of YBUT with reviews of the practical applications of YBUT in engineering, transportation, agriculture, automation, and other fields. The aim is to help new users to quickly understand YBUT and to help researchers, consumers, and stakeholders to quickly understand the research progress of the technology. The future of YBUT is also discussed to help explore the application of this technology in new areas.

In the field of pesticide spraying, droplet size is one of the most important factors affecting droplet deposition and drift. In order to study the effect of different droplet size parameters on droplet deposition distribution and drift of aerial spraying by using plant protection UAV, an aerial spraying test with the same spraying rate and different size droplets in rice canopy was carried out by using multi-rotor unmanned aerial vehicles (UAV) and four TEEJET nozzles with different orifice sizes (these droplets with a volume median diameter (VMD) of 95.21, 121.43, 147.28, and 185.09 μm, respectively), and the deposition distribution and penetration of droplets in the target area and the drift distribution of droplets in the non-target area were compared and analyzed. The results showed that the deposition distribution and penetration of droplets in the target area and the drift distribution of droplets in the non-target area were influenced by the droplet size. The droplet deposition rate in the upper and lower rice canopies were increased in the target area with the increase of droplet size. The penetration results of droplets also increased with the increase of droplet size, and that of droplets with a VMD of 185.09 μm was the best, reaching 38.13%. The average values of the cumulative drift rate of droplets in the rice canopy in the four tests were 73.87%, 50.26%, 35.91%, and 23.06%, respectively, and the cumulative drift rate and the drift distance of droplets decreased with the increase of droplet size, which indicated that the increase of droplet size can effectively reduce droplet drift. It demonstrated that the droplet size is one of the most important factors affecting droplet deposition and drift for pesticide spraying by plant protection UAV, and for the application of plant protection UAV with extra-low volume spraying, the use of droplets with VMD less than 160 μm should be avoided and a more than 10 m buffer zone should be considered downwind of the spraying field to avoid drug damage caused by pesticide drift. The results have fully revealed the effect of droplet size parameters on droplet deposition and drift of aerial spraying. Moreover, the influence of the wind field below the rotors on the distribution of droplet deposition was surmised and analyzed from the perspective of plant protection UAV. It is important for optimizing the droplet parameters of aerial spraying, increasing the spraying efficiency, and realizing precision agricultural aviation spray.

Appropriate Site Specific Weed Management (SSWM) is crucial to ensure the crop yields. Within SSWM of large-scale area, remote sensing is a key technology to provide accurate weed distribution information. Compared with satellite and piloted aircraft remote sensing, unmanned aerial vehicle (UAV) is capable of capturing high spatial resolution imagery, which will provide more detailed information for weed mapping. The objective of this paper is to generate an accurate weed cover map based on UAV imagery. The UAV RGB imagery was collected in 2017 October over the rice field located in South China. The Fully Convolutional Network (FCN) method was proposed for weed mapping of the collected imagery. Transfer learning was used to improve generalization capability, and skip architecture was applied to increase the prediction accuracy. After that, the performance of FCN architecture was compared with Patch_based CNN algorithm and Pixel_based CNN method. Experimental results showed that our FCN method outperformed others, both in terms of accuracy and efficiency. The overall accuracy of the FCN approach was up to 0.935 and the accuracy for weed recognition was 0.883, which means that this algorithm is capable of generating accurate weed cover maps for the evaluated UAV imagery.

As a new low volume application technology, unmanned aerial vehicle (UAV) application is developing quickly in China. The aim of this study was to compare the droplet deposition, control efficacy and working efficiency of a six-rotor UAV with a self-propelled boom sprayer and two conventional knapsack sprayers on the wheat crop. The total deposition of UAV and other sprayers were not statistically significant, but significantly lower for run-off. The deposition uniformity and droplets penetrability of the UAV were poor. The deposition variation coefficient of the UAV was 87.2%, which was higher than the boom sprayer of 31.2%. The deposition on the third top leaf was only 50.0% compared to the boom sprayer. The area of coverage of the UAV was 2.2% under the spray volume of 10 L/ha. The control efficacy on wheat aphids of UAV was 70.9%, which was comparable to other sprayers. The working efficiency of UAV was 4.11 ha/h, which was roughly 1.7–20.0 times higher than the three other sprayers. Comparable control efficacy results suggest that UAV application could be a viable strategy to control pests with higher efficiency. Further improvement on deposition uniformity and penetrability are needed.

Pine wilt disease causes huge economic losses to pine wood forestry because of its destructiveness and rapid spread. This paper proposes a detection and location method of pine wood nematode disease at a large scale adopting UAV (Unmanned Aerial Vehicle) remote sensing and artificial intelligence technology. The UAV remote sensing images were enhanced by computer vision tools. A Faster-RCNN (Faster Region Convolutional Neural Networks) deep learning framework based on a RPN (Region Proposal Network) network and the ResNet residual neural network were used to train the pine wilt diseased dead tree detection model. The loss function and the anchors in the RPN of the convolutional neural network were optimized. Finally, the location of pine wood nematode dead tree was conducted, which generated the geographic information on the detection results. The results show that ResNet101 performed better than VGG16 (Visual Geometry Group 16) convolutional neural network. The detection accuracy was improved and reached to about 90% after a series of optimizations to the network, meaning that the optimization methods proposed in this paper are feasible to pine wood nematode dead tree detection.