Recently, the construction industry uses the Recycled Concrete Aggregates (RCA)resulting from construction and demolition waste (CDW) to achieve sustainable requirements andeconomic benefits. In this paper, asphalt paving mixes were prepared with RCA instead of naturalaggregates for the base course in flexible road pavements and walking areas used by pedestrians andcyclists. Different asphalt mixes samples were prepared with different asphalt contents to meet therequired specifications. Additionally, several laboratory tests were carried out to assess mixturebehavior including the Marshall test. The results indicated that the mixture made with aggregates ofCDW have met all the requirements of Iraqi specifications of roads and bridges (SORB/R9). Thisinvestigation could be a useful guide for road engineers in designing asphalt mixtures from RCA.
In the last few decades, tyre rubber waste has been considered a risky issue to the ecosystem. A huge amount of used and deformed tyres is disposed of in landfill or recycled into other products. The main goal is to modify 60/70 bitumen grade to achieve 40/50 bitumen results. In this work, tyre rubber waste was added at different weights from 5 to 20% after cutting into small particles to use in the modification process of 60/70 asphalt binder. The modified asphalt was tested to meet the Iraqi standard specifications of roads and bridges. In the experimental work, Central Composite Design was applied to attain mathematical models that describes binder consistency by relating three operating parameters: tyre rubber ratio, mixing temperature and time. The predicted models relate to the penetration and softening point of the modified binder achieved R2 of 97 and 99%, respectively. The obtained results indicated that the penetration and softening point improved after adding 20% recycled tyre rubber at 170°C and 20 min of mixing time.
Producing “green” pavement is important in decreasing the negative effects of plastic on the environment and ensuring sustainable resource management. Because many worldwide strategies are aimed at reducing the use of plastic, this work studies a recycled polymer concrete modified by a defined amount of recycled plastic waste in asphalt. The specimens were prepared with a maximum optimal asphalt content using ±0.5% of the optimum level. The logic indicated that 11% plastic waste can be used as an alternative to the coarse aggregate. Experimental tests were carried out to examine moisture damage, short- and long-term aging, and compressive strength (rutting resistance). The measured properties were ITS, resilient modulus, and permanent deformation of the first load cycle and after 1200 load cycles using the PRLS device. In aging experiments, the resilient modulus was found to increase by 118% during the first cycle and by 40% after 1200 cycles. The decrease in permanent deformation was 40% and 48.5% after the first load cycle and after 1200 cycles, respectively. The results obtained in the moisture susceptibility test were within the required limit. Finally, the compressive strength of samples with asphalt content of 4.0%, 4.5%, and 5% was found to be 3660, 4120, and 2900 kPa, respectively. This achievement indicates the advantages of utilizing plastic waste in road construction to develop sustainable asphalt concrete with improved mechanical properties and reduced environmental impact, especially in hot climates such as Iraq, where it would be beneficial for rutting-sensitive roads.
Many of the research and investigations carried out to replace or reduce the fresh bitumen that uses in pavement construction as a binder due to rising the cost of crude oil production employed in bitumen manufacturing. This research seeks to determine the impact of employing bio-oil, namely waste vegetable oil (WVO), on the properties of bitumen, with the ultimate goal of improving bitumen's performance. The standard tests that were used to evaluate the physical and rheological properties of the control and WVO binders are penetration, softening point, viscosity, loss on heating, and dynamic shear rheometer (DSR). In order to assess WVO effectiveness, two different penetration grades 60/70 and 80/100 asphalt binders were modified with WVO at different percentages (1.5%, 3%, and 4.5% by weight of the binders). According to the results of the tests, the penetration values rose as the quantity of WVO in the binder increased, however, the softening point result decreased as the amount of WVO in the binder increased. With a rise in the amount of WVO in the binder, the viscosity of the binder was reduced. With increasing WVO, the rutting parameter decreased. As a result of this research, it was determined that waste vegetable oil has the potential to affect soft asphalt binders and can be used to make soft asphalt binders. Furthermore, by adding 4.5% WVO to a PEN60/70 asphalt binder, it can become a PEN80/100 asphalt binder.
30 March 2025 in Al-Qadisiyah Journal for Engineering Sciences
Highways are one of the most crucial infrastructure elements for any city. It is of high importance to keep them maintained to the high performance. This might need to establish a road maintenance department for the continued inspection and decision making. Spatial technologies, such as GIS, are particularly useful for integrating roadway data and enhancing their use and presentation for highway management and operation through the use of spatial relationships and maps. This paper presents a GIS-based system that serves as a platform for all aspects of the pavement condition assessment and maintenance. The resulting map system can enhance the maintenance process significantly by visualising the whole network with the state condition of each section. This paper examines the condition of road sections for a selected area in Al-Qassim, a city to the south of Babylon governorate. These road sections have varying condition states resulting from many factors such as weathering, insufficient drainage, ageing, traffic load, and lack of routine maintenance. The overall condition index (OCI) is used to assess the state of each section on a scale of 1 to 10. Most of the studied sections are falling below 5. Two strategies are presented for maintaining and inspecting the network that highway agencies and road engineers could adopt to save money and extend pavement life in a functional manner. Additionally, the study highlights the importance of recording all road information, including construction details, distress type and severity, and maintenance and rehabilitation processes, to inform future actions.