Spent garnet (SG) wastes are generated in significant quantities by several industrial activities, including abrasive waterjet cutting (AWJ), abrasive blasting, and filtration and powdered media applications. These wastes represent a promising secondary raw material for the production of sustainable construction materials, particularly green mortars and concretes, through their partial replacement of natural sand in cementitious systems. Such applications are relevant to both hydraulically setting inorganic binders (cement-based materials) and alkali-activated cementitious materials (AACMs). The valorization of SG wastes offers multiple benefits, notably a dual environmental advantage: reducing the consumption of natural aggregates and diverting industrial waste from disposal by integrating it into a new life cycle as a value-added by-product. Additional potential advantages include reduced production costs and possible improvements in the overall performance of mortars and concretes. Despite these benefits, the use of SG as an aggregate replacement remains insufficiently explored, with existing studies providing only preliminary and fragmented evidence of its feasibility. This paper presents an overview of a comprehensive four-year research program investigating SG wastes derived from single-cycle AWJ processes and their incorporation into conventional mortars as partial fine aggregate replacement in cement-based construction composites. The validation stage of the performance assessment expands the range of SG sources by including new sampling from the original suppliers, enabling verification of the repeatability and reproducibility of earlier findings. A broad set of physical, mechanical, and durability properties—particularly resistance to freeze–thaw cycles—is evaluated to achieve a robust and comprehensive material characterization. These results are further correlated with chemical and microstructural analyses, providing critical insights to support the technological transfer of SG-based construction materials to industrial applications with reduced carbon footprint.
Water electrolysis using electricity generated from renewable sources is a promising approach for producing green hydrogen. However, this process requires the development of electrocatalysts that are not only highly active and durable but also low-cost. Considerable efforts are being directed toward discovering and optimizing such materials, and this study contributes to the ongoing research in this area. In this work, three novel LaMnO3 perovskite–graphene oxide hybrids—namely LaMnO3/GO, Ag-doped LaMnO3/GO, and Pd-doped LaMnO3/GO—were synthesized and investigated for their electrocatalytic activity in water electrolysis under strongly alkaline conditions. To the best of our knowledge, these hybrid materials have not been previously reported in the context of electrocatalytic water splitting. Among the electrodes fabricated and tested for the hydrogen evolution reaction (HER), the one based on a catalyst ink containing Pd-doped LaMnO3/GO mixed with carbon black showed the best performance, achieving a low overpotential of 0.385 V at a current density of −10 mA/cm2. It also demonstrated good stability in the alkaline electrolyte and exhibited a Tafel slope of 0.34 V. These findings highlight the potential of the studied materials as effective and previously unreported electrocatalysts for water splitting.