An ultrasensitive metamaterial sensor based on double-slot vertical split ring resonators (DVSRRs) is designed and numerically calculated in the terahertz frequency. This DVSRR design produces a fundament LC resonance with a quality factor of about 20 when the incidence magnetic field component normal to the DVSRR array. The resonant characteristics and sensing performance of the DVSRR array design are systematically analyzed employing a contrast method among three similar vertical split ring resonator (SRRs) structures. The research results show that the elimination of bianisotropy, induced by the structural symmetry of the DVSRR design, helps to achieve LC resonance of a high quality factor. Lifting the SRRs up from the substrate sharply reduces the dielectric loss introduced by the substrate. All these factors jointly result in superior sensitivity of the DVSRR to the attributes of analytes. The maximum refractive index sensitivity is 788 GHz/RIU or . Also, the DVSRR sensor maintains its superior sensing performance for fabrication tolerance ranging from to 4% and wide range incidence angles up to 50° under both TE and TM illuminations.
5 November 2018 in IEEE Transactions on Emerging Topics in Computational Intelligence
With the rapid evolvement of the Internet and data acquisition technology as well as the continuous advancement of science and technology, the amount of data in many fields has reached the level of terabyte or petabyte and most data collection comes from the Internet of Things (IoT). The rapid advancement of IoT big data has provided valuable opportunities for the development of people in all areas of society. At the same time, it has also brought severe challenges to various types of current information processing systems. Effectively using the big data technology, discovering the hidden laws in big data, tapping the potential value of big data, and predicting the development trend of things to allocate resources more reasonably will promote the overall development of society. However, most of the IoT big data are presented as heterogeneous data, with high dimensions, different forms of expression, and a lot of redundant information. The current machine learning model works in vector space, which makes it impossible to gain big data features because vectors cannot simulate the highly nonlinear distribution of IoT big data. This paper presents a deep learning calculation model called tensor deep learning (TDL), which further improves big data feature learning and high-level feature fusion. It uses tensors to model the complexity of multisource heterogeneous data and extends the vector space data to the tensor space, when feature extraction in the tensor space is included. To fully understand the underlying data distribution, the tensor distance is adopted as the average square sum error term of the output layer reconstruction error. Based on the conventional back-propagation algorithm, this study proposes a high-order back-propagation algorithm to extend the data from the linear space to multiple linear space and train the parameters of the proposed model. Then, to evaluate its performance, the proposed TDL model is compared with the stacked auto encoder and the multimodal deep learning model. Furthermore, experiments are performed on two representative datasets, namely CUAVE and STL-10. Experimental results show that the proposed model not only excels in heterogeneous data fusion but also provides a higher recognition accuracy than the conventional deep learning model or the multimodal learning model for big data.
A switchable and tunable six-wavelength single-longitudinal mode (SLM) thulium-doped fiber laser in the 2050 nm band is proposed and experimentally demonstrated. Two cascaded sampled fiber Bragg gratings (SFBGs), acted as an integrated six-channel reflector, are to define the lasing wavelength channels in a multi-wavelength switchable fiber laser for the first time. The switchability of the fiber laser was realized by polarization-dependent loss modulation. SLM lasing in each channel was guaranteed by a novel passive dual-ring compound cavity (DRCC), composed of two symmetric 3 × 3 optical couplers (OCs). Six single-wavelength operations are easily obtained and switched, with the high optical signal-to-noise ratios of >71 dB, >72 dB, >62 dB for λ 11 – λ 13 and > 65 dB, >61 dB, >59 dB for λ 21 – λ 23, respectively. The maximum power and wavelength fluctuations are as low as 0.56 dB and 0.01 nm, respectively. The measured laser linewidths ranged from 7.5 to 9.2 kHz, calculated by the β-separation line method based on the measured frequency noise spectra. Nine switchable dual-wavelength operations with different wavelength intervals and two triple-wavelength operations were also obtained. Our proposed fiber laser has great potential in free-space optical communication.
The increasing development of information technology has led to a higher demand for communication capacity. Moreover, the mode division multiplexing (MDM) is considered one of the important technologies to expand the optical fiber transmission capacity, and the few-mode erbium-doped fiber amplifier (FM-EDFA) is a main device applied for optical fiber loss compensation under long-haul communication transmission systems. This paper reports the design and characterization of a six-mode erbium-doped fiber amplifier (6M-EDFA) for MDM systems. A center-depressed optical fiber with a trench-assisted structure, is designed and the adjustment of the relevant parameters is applied to reduce the splice loss between the six-mode erbium-doped fiber (6M-EDF) and the transmission fiber. The results show the lowest splice loss is theoretically 0.293 dB. By analyzing the mode field distribution, two erbium ion doping regions are initially identified, the ring region is further layered, and the doping concentration of the three layers is optimized to achieve high gain and low differential modal gain (DMG) using a genetic algorithm (GA). In the case of core forward pumping of the LP 01 mode at 1480 nm, the simulation results show that the average gain of 25.7 dB and the DMG of 0.277 dB are obtained at 1550 nm considering the mode coupling. Moreover, a 6-mode MDM transmission system is built to fully verify the performance of the designed amplifier to meet the requirements of the MDM communication system.