Space-time adaptive processing (STAP) algorithms with coprime arrays can provide good clutter suppression potential with low cost in airborne radar systems as compared with their uniform linear arrays counterparts. However, the performance of these algorithms is limited by the training samples support in practical applications. To address this issue, a robust two-stage reduced dimension (RD) sparsity-aware STAP algorithm is proposed in this work. In the first stage, an RD virtual snapshot is constructed using all spatial channels but only m adjacent Doppler channels around the target Doppler frequency to reduce the slow-time dimension of the signal. In the second stage, an RD sparse measurement modeling is formulated based on the constructed RD virtual snapshot, where the sparsity of clutter and the prior knowledge of the clutter ridge are exploited to formulate an RD overcomplete dictionary. Moreover, an orthogonal matching pursuit (OMP)-like method is proposed to recover the clutter subspace. In order to set the stopping parameter of the OMP-like method, a robust clutter rank estimation approach is developed. Compared with recently developed sparsity-aware STAP algorithms, the size of the proposed sparse representation dictionary is much smaller, resulting in low complexity. Simulation results show that the proposed algorithm is robust to prior knowledge errors and can provide good clutter suppression performance in low sample support.
Coprime arrays and coprime time samplers have been receiving attractive attention recently due to their advantages of large apertures and achievable degrees of freedom with low cost. In this paper, different from traditional airborne radar with uniform transmitting pulses, the considered radar is configured with a coprime array in receiver and transmits the pulses with coprime repetition intervals. Because this sampling structure violates the conditions of the conventional clutter rank estimation rules, we first propose a novel method to estimate the clutter rank based on effective aperture-bandwidth product. Then, two space-time adaptive processing (STAP) algorithms, namely, the sample matrix inverseand principal components-STAP, are proposed by using the reconstructed virtual space-time snapshots. Additionally, a thoroughly theoretical convergence analysis of the proposed algorithms is conducted. Exclusive simulation results are provided to demonstrate the effectiveness of the proposed STAP algorithms.
The design of an integrated sensing and communication (ISAC) waveform compatible with the 5G new radio (NR) system is crucial in enabling ISAC by utilizing the hardware of existing base stations (BSs). In this paper, we design an inner-frame time division multiplexed sensing waveform in the frame structure of 5G NR to achieve ISAC. The designed waveform is computed by the simulated annealing algorithm on an optimization cost function of a constrained combination of the peak-to-sidelobe ratio (PSLR) and the integrated sidelobe ratio (ISLR) of the velocity ambiguity function. Specifically, the constraints are the 5G communication protocol and 5G NR frame structure. In addition, we conducted corresponding signal detection and estimation methods to illustrate the performance of the sensing waveform. Both theoretical analysis and simulation experiments show that the designed waveform can effectively achieve target detection and parameter estimation under low sensing cost conditions.
Space‐time adaptive processing (STAP) for sparse arrays such as coprime and nested arrays is shown to have improved performance for clutter suppression in airborne radar as compared with uniform linear arrays with the same size. However, most of the existing STAP algorithms are derived based on the assumption that the array manifold is exactly known. In this study, a robust STAP algorithm for the clutter suppression with coprime arrays in the presence of gain and phase (GP) errors is proposed. In particular, the virtual space‐time signal with GP errors is first formulated using the covariance matrix of the perturbed array received data under the Gaussian distributed interference assumption. Then, the problem of the clutter spectrum and GP errors' estimates is formulated as a joint minimization optimization problem by exploiting the sparsity of the clutter in the angle–Doppler plane. Finally, a two‐step approach based on the sparse recovery and least‐squared method is developed to solve the resultant optimization problem and the STAP filter can be designed using the clutter spectrum and GP errors' estimates. Compared with the existing sparsity‐based STAP algorithms for coprime arrays, the proposed algorithm shows more robustness to GP errors as illustrated by simulation results.
In 5G new radio (NR) integrated sensing and communication (ISAC) systems, the overhead of sensing time resources in waveform design is a key metric. Traditional uniform pulse sensing waveforms, which require fixed time slot positions, incur large sensing overhead and may not be feasible within the context of existing 5G NR standards for low-latency scenarios. To address this issue, two novel frame-level sensing waveform designs based on double coprime sampling structures are proposed via downlink sensing. Specifically, two types of novel orthogonal frequency-division multiplexing (OFDM) structure pulse sensing waveforms based on coprime sampling are first proposed to accommodate the specific 5G NR frame structure. Then, a low-complexity frequency-domain radar signal processing method is proposed for sensing target detection and velocity estimation based on the constructed equivalent virtual fast-slow-time domain signal. Moreover, the theoretical sensing performance of the proposed waveforms and the computational complexity of the sensing method are thoroughly analyzed. Compared with the conventional uniform OFDM-based waveform design, the proposed coprime-based frame-level OFDM sensing waveforms utilize significantly fewer time slots, resulting in reduced sensing overhead with slight sensing performance loss. Numerical examples are presented to illustrate that the proposed waveforms can offer robust sensing performance with reduced sensing overhead and have a computational complexity a little higher than that of conventional fast Fourier transform algorithms.
A new reduced‐rank (RR) space‐time adaptive processing (STAP) algorithm based on multistage selections of angle‐Doppler filters is proposed in the form of a generalised sidelobe canceller. First, two types of the RR auxiliary angle‐Doppler filters are designed based on the discrete Fourier basis functions. Then, a novel multistage method is implemented to select the angle‐Doppler filters by using the cross‐correlation observed at the current stage and the residual output observed at the previous stage. Finally, the asymptotic statistic performance of target detection is evaluated in terms of the conventional framework of STAP for the cases of both known and unknown covariance, which shows that the proposed algorithm is capable of providing the constant false alarm rate. Numerical examples are provided, and they demonstrate that the proposed algorithm is able to offer better performance than the existing sparsity‐based and the conventional reduced‐dimension algorithms under the intrinsic clutter motion and array gain and phase errors.