23 August 2024 in IEEE Communications Surveys & Tutorials
The widespread adoption of the fifth generation (5G) of cellular networks has brought new opportunities for the development of localization-based services. High-accuracy positioning use cases and functionalities defined by the standards are drawing the interest of vertical industries. In the transition towards the deployment, this paper aims to provide an in-depth tutorial on 5G positioning, summarizing the evolutionary path that led to the standardization of cellular-based positioning, describing the localization elements in current and forthcoming releases of the Third Generation Partnership Project (3GPP) standard, and the major research trends. By providing fundamental notions on wireless localization, comprehensive definitions of measurements and architectures, examples of algorithms, and details on simulation approaches, this paper is intended to represent an exhaustive guide for researchers and practitioners. Our approach aims to merge practical aspects of enabled use cases and related requirements with theoretical methodologies and fundamental bounds, allowing to understand the trade-off between system complexity and achievable, i.e., tangible, benefits of 5G positioning services. We analyze the performance of 3GPP Rel-16 positioning by standard-compliant simulations in realistic outdoor and indoor propagation environments, investigating the impact of the system configuration and the limitations to be resolved for delivering accurate positioning solutions.
20 March 2017 in IEEE Access
Multiple-input multiple-output (MIMO) radar has received much attention due to its potentials in offering improved performance for target detection and parameter estimation. It has been shown that the performance of direction finding techniques can be considerably enhanced in MIMO radar, since an extended virtual array can be employed. In general, the performance gain is achieved by assuming that both the transmitter and receiver are well calibrated without uncertainties. However, in practice, both the transmitter and receiver may suffer from various array imperfections such as mutual coupling. Hence, the problem of direction finding in MIMO radar with unknown mutual coupling is investigated in this paper. Computationally efficient algorithms are developed to estimate the directions-of-arrival by exploiting the structure of mutual coupling matrix of the transmitter and receiver equipped with uniform linear arrays. Moreover, it is shown that the proposed methods can be applied to scenarios in which the transmitter or receiver has other imperfections, for example, sensor position perturbations or gain/phase mismatches. Simulation results demonstrate that the proposed methods are able to effectively eliminate the negative influence of unknown mutual coupling on direction finding and offer improved performance over the existing methods.
4 December 2017 in IEEE Access
In this paper, a new linear array configuration based on the concept of two-level nested array is proposed. Specifically, the proposed array configuration consists of two uniform linear arrays (ULAs) plus a separate sensor with appropriate spacing apart. Compared with the original two-level nested array, the degrees of freedom (DOF) of our proposed array configuration can be increased by 2L—6 for a array with L physical sensors. Moreover, the virtual array aperture can be enlarged by nearly (L22—L—2)d1 where d1 is the inter-element spacing of the first ULA. Owing to these advantages, our proposed array configuration has enhanced resolution and achieves better performance in parameter estimation, such as direction-of-arrival (DOA) estimation. Numerical simulations of DOA estimation exhibit the effectiveness and superiority of this array configuration.
23 February 2022 in Signal Processing
8 June 2023 in IEEE Transactions on Signal Processing
In polarimetric radars, corresponding to the polarized antennas, exploiting waveform diversity along the polarization dimension becomes accessible. In this paper, we aim to maximize the signal-to-interference plus noise ratio (SINR) of a polarimetric radar by optimizing the transmit polarimetric waveform, the power allocation on its horizontal and vertical polarization segments, and the receiving filters jointly, subject to separate (while practical) unit-modulus and similarity constraints. To mitigate the SINR sensitivity on Target-Aspect-Angle (TAA), the average Target-Impulse-Response Matrix (TIRM) within a certain (TAA) interval is employed as the target response, which leads to an average SINR as the metric to be maximized. For the formulated nonconvex fractional programming problem, we propose an efficient algorithm under the framework of the alternating optimization method. Within, the alternating direction method of multiplier (ADMM) is deployed to solve the inner subproblems with closed form solutions obtained at each iteration. The analysis on computational cost and convergence of the proposed algorithm is also provided. Experiment results show the effectiveness of the proposed algorithm, the robustness of the output SINR against the TAA uncertainty, and the superior performance of polarimetric power adaption.
14 September 2023 in IEEE Transactions on Signal Processing
In this paper, we devise a sparse array design algorithm for adaptive beamforming. Our strategy is based on finding a sparse beamformer weight to maximize the output signal-to-interference-plus-noise ratio (SINR). The proposed method utilizes the alternating direction method of multipliers (ADMM), and admits closed-form solutions at each ADMM iteration. The algorithm convergence properties are analyzed by showing the monotonicity and boundedness of the augmented Lagrangian function. In addition, we prove that the proposed algorithm converges to the set of Karush-Kuhn-Tucker stationary points. Numerical results exhibit its excellent performance, which is comparable to that of the exhaustive search approach, slightly better than those of the state-of-the-art solvers, including the semidefinite relaxation (SDR), its variant (SDR-V), and the successive convex approximation (SCA) approaches, and significantly outperforms several other sparse array design strategies, in terms of output SINR. Moreover, the proposed ADMM algorithm outperforms the SDR, SDR-V, and SCA methods, in terms of computational complexity.