Ming-Shyan Huang

Prof. Ming-Shyan Huang

National Kaohsiung University of Science and Technology
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2020 in Polymers
Verified
Journal Article
Open access
PDF file
Kun Cheng KeKun Cheng Ke
Kun Cheng Ke
Ming-Shyan HuangMing-Shyan Huang
Ming-Shyan Huang
Injection molding has been widely used in the mass production of high-precision products. The finished products obtained through injection molding must have a high quality. Machine parameters do not accurately reflect the molding conditions of the polymer melt; thus, the use of machine parameters leads to erroneous quality judgments. Moreover, the cost of mass inspections of finished products has led to strict restrictions on comprehensive quality testing. Therefore, an automatic quality inspection that provides effective and accurate quality judgment for each injection-molded part is required. This study proposes a multilayer perceptron (MLP) neural network model combined with quality indices for performing fast and automatic prediction of the geometry of finished products. The pressure curves detected by the in-mold pressure sensor, which reflect the flow state of the melt, changes in various indicators and molding quality, were considered in this study. Furthermore, the quality indices extracted from pressure curves with a strong correlation with the part quality were input into the MLP model for learning and prediction. The results indicate that the training and testing of the first-stage holding pressure index, pressure integral index, residual pressure drop index and peak pressure index with respect to the geometric widths were accurate (accuracy rate exceeded 92%), which demonstrates the feasibility of the proposed method.

1 October 2019 in Journal of Manufacturing Processes
Verified
Journal Article
Closed access
JCJian-Yu Chen
Jian-Yu Chen
JZJia-Xiang Zhuang
Jia-Xiang Zhuang
Ming-Shyan HuangMing-Shyan Huang
Ming-Shyan Huang

14 August 2019 in Polymers
Verified
Journal Article
Open access
PDF file
SNShih-Chih Nian
Shih-Chih Nian
YFYung-Chih Fang
Yung-Chih Fang
Ming-Shyan HuangMing-Shyan Huang
Ming-Shyan Huang
Injection molding is a mature technology that has been used for decades; factors including processed raw materials, molds and machines, and the processing parameters can cause significant changes in product quality. Traditionally, researchers have attempted to improve injection molding quality by controlling screw position, injection and packing pressures, and mold and barrel temperatures. However, even when high precision control is applied, the geometry of the molded part tends to vary between different shots. Therefore, further research is needed to properly understand the factors affecting the melt in each cycle so that more effective control strategies can be implemented. In the past, injection molding was a “black box”, so when based on statistical experimental methods, computer-aided simulations or operator experience, the setting of ideal process parameters was often time consuming and limited. Using advanced sensing technology, the understanding of the injection molding process is transformed into a “grey box” that reveals the physical information about the flow behavior of the molten resin in the cavity. Using the process parameter setting data provided by the machine, this study developed a scientific method for optimal parameter adjustment, analyzing and interpreting the injection speed, injection pressure, cavity pressure, and the profile of the injection screw position. In addition, the main parameters for each phase are determined separately, including injection speed/pressure during the mold filling phase, velocity-to-pressure switching point, packing pressure and time. In this study, the IC tray was taken as an example. The experimental results show that the method can effectively reduce the warpage of the IC-tray from 0.67 mm to 0.20 mm. In addition, the parameters profiles obtained by parameter optimization can be applied for continuous mass production and process monitoring.

22 January 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Kun Cheng KeKun Cheng Ke
Kun Cheng Ke
Ming-Shyan HuangMing-Shyan Huang
Ming-Shyan Huang
Conventional methods for assessing the quality of components mass produced using injection molding are expensive and time-consuming or involve imprecise statistical process control parameters. A suitable alternative would be to employ machine learning to classify the quality of parts by using quality indices and quality grading. In this study, we used a multilayer perceptron (MLP) neural network along with a few quality indices to accurately predict the quality of “qualified” and “unqualified” geometric shapes of a finished product. These quality indices, which exhibited a strong correlation with part quality, were extracted from pressure curves and input into the MLP model for learning and prediction. By filtering outliers from the input data and converting the measured quality into quality grades used as output data, we increased the prediction accuracy of the MLP model and classified the quality of finished parts into various quality levels. The MLP model may misjudge datapoints in the “to-be-confirmed” area, which is located between the “qualified” and “unqualified” areas. We classified the “to-be-confirmed” area, and only the quality of products in this area were evaluated further, which reduced the cost of quality control considerably. An integrated circuit tray was manufactured to experimentally demonstrate the feasibility of the proposed method.

1 August 2019 in Advances in Polymer Technology
Verified
Journal Article
Open access
PDF file
JCJian-Yu Chen
Jian-Yu Chen
CTChien-Chou Tseng
Chien-Chou Tseng
Ming-Shyan HuangMing-Shyan Huang
Ming-Shyan Huang
Quality control is a crucial issue in the injection molding process with target of obtaining a high yield rate and reducing production cost. Consequently, effective methods for monitoring the injection conditions (e.g., pressure, velocity, and temperature) in real-time and adjusting these conditions adaptively as required to ensure a consistent part quality are essential. This study proposes a quality index based on the clamping force increment during the injection cycle, as determined by four strain gauges attached to the tie bars of the injection molding machine. Also, various quality indexes for online quality monitoring and prediction purposes based on the pressure, viscosity, and energy features extracted from the pressure profiles obtained at the load cell, nozzle, and molding cavity, respectively, are compared. The feasibility of the proposed quality indexes is investigated experimentally for various settings of the barrel temperature, back pressure, and rotational speed of the plasticizing screw. It is shown that all of the quality indexes are correlated with the injection-molded quality and hence provide a feasible basis for the realization of an on-line quality monitoring and control system. Particularly, the tie-bar elongation quality index requires no modification or invasion of the injection molding system or cavity and hence provides a particularly attractive solution for monitoring and controlling the part quality.

4 December 2020 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
PDF file
Ming-Shyan HuangMing-Shyan Huang
Ming-Shyan Huang
Kun Cheng KeKun Cheng Ke
Kun Cheng Ke
CLChun‐Ying Liu
Chun‐Ying Liu