Solar radiation, longwave radiation, sensible heat flux, and latent heat flux constitute the primary forms of air–sea heat exchange, serving as crucial computational parameters in numerical simulations of thermal discharge. This study investigates a coastal nuclear power plant and employs a modified Morris screening method to quantitatively assess the contribution rates of various air–sea heat exchange processes to the spatial distribution of temperature rise under different operating conditions. The results indicate that the influence of air–sea heat exchange processes on the thermal discharge envelope exhibits a nonlinear pattern. The individual parameter sensitivity of shortwave radiation, sensible heat flux and latent heat flux is higher in the low temperature rise region () than in the high temperature rise region (), with the individual parameter sensitivities of longwave radiation and latent heat flux displaying distinct threshold effects. The dominant heat exchange mechanisms vary across temperature rise regions: longwave radiation predominates in the high temperature rise region (), contributing approximately 74.71%, whereas latent and sensible heat fluxes dominate in the low temperature rise region (), accounting for a combined contribution of about 88.58%. These findings provide a scientific basis for model simplification and targeted parameterization.
The parameter optimization of marine hydrodynamic models currently relies predominantly on expert empirical knowledge, but the quantitative indicators and weighting mechanisms for rapid calibration remain unclear due to inherent model uncertainties and complexities. This study addresses these challenges through expert questionnaires that collect fuzzy evaluations of calibration criteria, developing an integrated methodology combining the theory of axiomatic fuzzy set (AFS) with principal component analysis (PCA). Numerical case studies quantify calibration indicator weights and assess critical parameter impacts, revealing that bathymetry and roughness coefficients predominantly govern simulation accuracy. Elevated roughness conditions demonstrate two regimes: (1) at 1–2 × baseline roughness, strong positive correlations (with a coefficient of determination R2 increased by up to 0.568 compared to baseline) confirm effective model-data matching for tidal levels/currents; (2) beyond 2 × baseline roughness, progressive correlation decay accompanies increasing coefficients, indicating amplified simulation–measurement discrepancies. Notably, under reduced roughness conditions, high accuracy persists during spring/mid-tide phases but significantly diminishes during neap tides, demonstrating enhanced roughness sensitivity in low-tidal energy regimes.