The undrained shear strength of organic soils can be evaluated based on measurements obtained from the dilatometer test using single- and multi-factor empirical correlations presented in the literature. However, the empirical methods may sometimes show relatively high values of maximum relative error. Therefore, a method for evaluating the undrained shear strength of organic soils using artificial neural networks based on data obtained from a dilatometer test and organic soil properties is presented in this study. The presented neural network, with an architecture of 5-4-1, predicts the normalized undrained shear strength based on five independent variables: the normalized net value of a corrected first pressure reading (po − uo)/σ′v, the normalized net value of a corrected second pressure reading (p1 − uo)/σ′v, the organic content Iom, the void ratio e, and the stress history indictor (oc or nc). The neural model presented in this study provided a more reliable prediction of the undrained shear strength in comparison to the empirical methods, with a maximum relative error of ±10%.
In order to identify the soil type in the ground, Marchetti’s nomogram chart is commonly used on the basis of dilatometer tests (DMT). In this chart, the material index values (ID) and the dilatometer modulus (ED) are used to determine the state and type of soils predominant in mineral soils. Unfortunately, this classification is not accurate enough for the identification of organic soils. This article proposes a new classification based on a nomogram chart for both mineral soils and organic soils using (p0), (p1) readings and pore water pressure (uo).
1 June 2017 in Annals of Warsaw University of Life Sciences – SGGW. Land Reclamation
The paper presents the results of dilatometer and laboratory tests performed on heavily preconsolidated boulder clays and Pliocene clays prevailing in the Warsaw region. Several different correlations available for evaluating undrained shear strength and constrained modulus from dilatometer tests are discussed. Empirical coefficients for multi-factor correlation to obtain undrained shear strength from dilatometer tests for boulder clays and Pliocene clays were determined. The relationship between factor RM and horizontal stress index (KD) for boulder clays was proposed for the evaluation of constrained modulus from dilatometer tests.
Recently, geotechnical problems that are characterized by a high degree of complexity and uncertainty with respect to input data have been solved using Bayesian analysis. One example is the problem of cautious estimation of geotechnical parameters according to Eurocode 7 requirements. The research included various types of soil such as peat, gyttja, organic mud, and clays. These were studied in order to develop an empirical correlation for determining the unit weight of mineral and organic soils. The compiled database of documented field research sites for different types of soil was used to investigate and develop direct relationships between measured results and dilatometer (DMT) readings, i.e., po and p1 together with pore water pressure (uo) and pressure (Pa). The soil unit weights were determined for both mineral and organic soils. The paper addresses the applicability of the Bayesian approach in geotechnics via a simple example related to the determination of characteristic values of geotechnical parameters for design structures. The results show that it is possible to conduct a more reliable forecast with improved statistical measures compared to other available methods for multilayer subsoils.
1 January 2011 in Annals of Warsaw University of Life Sciences – SGGW. Land Reclamation
Settlement evaluation of spread foundations on heavily preconsolidated cohesive soils. The paper presents the results of fi eld and laboratory tests performed on the heavily preconsolidated boulder clays which prevail on the campus of the Warsaw University of Life Sciences – SGGW
as foundation layers. Based on the results of field and laboratory tests a problem of spatial variability assessment of the thickness of foundation layers and the soil parameters is discussed. Special attention is drawn to the selection of the design values of oedometer moduli and the suitability of calculation methods for settlement evaluation. Calculated settlements were approved by the field measurements performed during building construction.
1 January 2007 in Annals of Warsaw University of Life Sciences – SGGW. Land Reclamation
Usage of the graph clustering algorithm to the recognition of geotechnical layers: The aim of the paper is to present the approach to the application of the graph clustering algorithm to the recognition of geotechnical layers from the dilatometer tests. Results of the measurements obtained from the DMT test in the test site (subsoil of one of the buildings in the Warsaw University of Life Sciences campus) were analyzed by the clustering algorithm which was able to extract the separate groups of the measurements, representing identical soil type. This method is parameterized, so its verification by the geotechnical experts was necessary to determine the optimal parameter values. They lead to the determination of the soil types as close to the actual situation, as possible. Also, the output of the algorithm was analyzed by the geotechnical experts to identify and label the extracted soil types.