Lithium metal anode (LMA) possesses the largest energy density among all anode candidates, while dendrite growth is a huge barrier in the direct application of LMA in batteries. Herein, metal–organic framework (MOF) derived Zn–CxNy nanoparticle arrays are newly grown onto carbon cloth as an effective host toward lithium metal anode. The N and Zn species are lithiophilic to Li-ions, resulting in a stable Li plating/stripping process of up to 2300 h without running into a dendrite issue when operating at a current density of 10 mA cm−2. The newly developed ZNCC-Li anode also exhibits an ultralow voltage hysteresis of only 6.4 mV at the end of the operating process. This work creates an effective design of MOF-derived lithium metal anode suitable for high-energy batteries.
A g-C 3 N 4 –poly(1,3-dioxolane) (CN–PDOL) composite interlayer was in situ synthesized by polymerization upon a lithium metal anode. The synergistic effect could increase the electrochemical performance of the lithium metal anode.
3 August 2023 in ACS Applied Materials & Interfaces
Electrochemical and chemical interfacial reaction mechanisms between LiNi0.5Co0.2Mn0.3O2 (NMC532) and poly(propylene carbonate) solid polymer electrolyte (PPC‐SPE) are studied. Ni3+ and Co4+ species which are electrochemically oxidized from Ni2+ and Co3+ during the charging process will induce the decomposition of PPC. Fourier transform infrared spectroscopy (FT‐IR) and 1H nuclear magnetic resonance (NMR) analysis confirm that the decomposition products of PPC contains ether, which might produce through condensation reaction of alcohol compounds. To retard this side reaction, graphene oxide is applied to coat commercial LiNi0.5Co0.2Mn0.3O2 particles via a facile chemical approach. Compared with pristine cathode, the coated sample displays higher initial capacity, better cycle stability and lower interfacial resistance after cycled. After 300 cycles, the capacity retention is 69.2% at 0.3 C and the resistance is only 25 Ω after 180 cycles. This is due to the graphene layer facilitates the interfacial charge‐transfer process and slows the cathode/electrolyte interfacial side reaction. Consequently, the study illuminated the interface issues of PPC based solid‐state lithium batteries.