Human body communication (HBC) is a wireless communication method that uses the human body as part of the transmission medium. Electrodes are used instead of antennas, and the signal is transmitted by the electric current through the human body and by the capacitive coupling outside the human body. In this study, direction of electric field lines and direction of electric current through the human body were analyzed by the finite-difference time-domain method to clarify the signal path, which is not readily apparent from electric field strength distribution. Signal transmission from a transmitter on the subject’s wrist to an off-body receiver touched by the subject was analyzed for two types of transmitter electrode settings. When both the signal and ground electrodes were put in contact with the human body, the major return path consisted of capacitive coupling between the receiver ground and the human body, and the electric current through the human body that flowed back to the ground electrode of the transmitter. When the ground electrode was floating, the only return path was through the capacitive coupling of the floating ground. These results contribute to the better understanding of signal transmission mechanism of HBC and will be useful for developing HBC applications.
In this study, the radiation efficiency of a monopole antenna using a transparent conductive film with respect to the film thickness and conductivity is investigated. It is found that when the conductivity of the material is low and the film thickness becomes thin, not only the radiation efficiency decreases due to the increase in the material loss, but also the reflection characteristics of the antenna deteriorate due to impedance mismatch, resulting in being difficult in efficient feeding and steeply decreasing in antenna gain.
6 June 2025 in Journal of Vacuum Science & Technology B
Wireless communication is the mainstay of the modern information infrastructure, creating a growing demand for innovative antenna technologies. Transparent antennas combine high optical transparency and effective radio frequency performance to address the limitations of conventional opaque metal antennas. They have also expanded their application possibilities to smartphones, wearable devices, automotive windows, and building surfaces. In this study, we investigated a dielectric–metal–dielectric (DMD) structured transparent conductive film, using an indium tin oxide (ITO)/Ag/ITO three-layer structure to balance high transmittance and conductivity. The films were deposited using a DC-facing target sputtering system with varied Ag layer thicknesses and subsequently heated (annealed) at temperatures ranging from 200 to 500 °C. The optical transmittance, sheet resistance, and carrier density were measured, and a fabricated monopole antenna (20 × 5 mm2) was used to evaluate the radiation efficiency. An Ag layer with a thickness of 7.5 nm exhibited a 73.3% transmittance at 650 nm and a conductivity of 7.8 × 105 S/m in the as-deposited state. After annealing at 300 °C, the transmittance increased to 76.0% and 8.3 × 105 S/m. These results highlight the potential of ITO/Ag/ITO DMD films for advancing the transparent antenna technology for next-generation wireless communication systems.
In this study, we investigated the electric field distribution and transmission characteristics between a stationary device and an arm-mounted wearable human body communication device including earth ground. The results showed that when the stationary device signal electrode is excited, the electric field distribution around the legs and torso becomes weak when there is an earth ground as compared to when there is no earth ground, regardless of the size of the earth ground (finite, infinite). In addition, it was found that when there is an earth ground, the transmission characteristics between the stationary device and the arm-mounted wearable human body communication device are better by approximately 6 dB than when there is no earth ground, regardless of the size of the earth ground (finite, infinite). These are thought to be because a change occurs in the electric current path flowing through the body owing to the presence of the earth ground. The above proves that when examining communications between a stationary device and a human body wearing a human body communication device, the study should consider earth ground.
6 February 2023 in Japanese Journal of Applied Physics
Gold nanoparticles with a uniform particle size were easily immobilized on the transparent electrode by an electrochemical deposition. The polypyrrole film on the obtained nano-structured electrode exhibited anomalous permeation, indicating that this electrode functions as a metasurface.