In recent years, the utilization of the spectrally tunable light sources (STLSs) is increasing dramatically across a wide range of applications. However, the existing multi-spectral systems still possess many crucial issues, such as relatively narrow spectral ranges, an unintegrated system, poor fittings, and relatively large sizes. In this study, a light-emitting diode (LED) based STLSs integrated system which integrates the remote controlling, accurate power supply, and reliable heat dissipation has been carefully designed, constructed, calibrated, and demonstrated. A hybrid offline and real-time online feedback technique is proposed based on deep learning offline training and real-time online feedback fine-tuning to precisely achieve target spectrum. The maximum deviation of common target spectral matching in the range of 380 nm ~ 780 nm is 2.75%. The system output maintains a high-level stability over a large dynamic range with only 2.03% maximum deviation. A dual-light output of the system facilitates the capability as standard luminance and illuminance calibration light source. The proposed integrated system has shown promising merits such as compact size, high efficiency and exactitude, making it an ideal universal tunable light source for multiple applications.
Optical crosstalk between adjacent pixels acts as one of the major challenges for miniaturized light-emitting diode (mini-LED) displays. In this letter, the impacts of optical crosstalk on the chromatic characteristics of the four-in-one mini-LED integrated matrix device (IMD) have been investigated. The influence of driving current on the optical crosstalk in four-in-one IMDs has also been determined. To be specific, red mini-LEDs can compromise the color gamut of full-color self-emissive mini-LED displays. This demonstrates the crucial need to optimize the operating conditions of red mini-LEDs to alleviate optical crosstalk in displays using four-in-one IMDs. δ u ’ v ’, the chromatic shift, causing by the optical crosstalk originating from red mini-LEDs reaches 0.024, 0.045 for green and blue mini-LEDs, and the color gamut decreases from 112.00% to 102.47% under the red crosstalk.
Biochar application is a well-recognized strategy to enhance agricultural soil fertility, but its structural heterogeneity leads to inconsistent outcomes in soil improvement, particularly in water and nutrient transport dynamics. In order to ensure the beneficial effects of biochar-amended agricultural soils in terms of water retention and fertilizer fixation, in this paper, we aim to elucidate the effect of the structural heterogeneity of biochar on the hydraulic properties and nutrient transport of agricultural soils. This study compares biochars at millimeter (BMP), micrometer (BUP), and nanometer (BNP) scales using CT scanning, and investigates the effects of different application rates (0.0–2.0%) on soil’s hydraulic properties and nutrient transport using soil column experiments and CDE analyses. The results show that biochar generally decreased soil saturated hydraulic conductivity (SSHC), except for the application of 2.0% BMP, which increased it. Biochar enhanced soil saturated water content (SSWC) and water holding capacity (WHC), with the 2.0% BMP treatment achieving the highest values (SSHC: 49.34 cm/d; SSWC: 0.40 g/g; WHC: 0.25 g/g). BUPs and BNPs inhibited water infiltration due to pore-blocking, while 2.0% BMP promoted infiltration. Convective dispersion equation analysis (CDE) indicated that BUPs and BNPs reduced water and nutrient transport, with 2.0% BMP showing optimal performance. Statistical analyses revealed that biochar’s structural heterogeneity significantly affected soil water repellency, its hydraulic properties, and solute transport (p < 0.05). Smaller particles enhanced water retention and nutrient fixation, while larger particles improved WHC at appropriate rates. These findings provide valuable insights for optimizing biochar application to improve soil functions and support sustainable agriculture.
The significant differences in insects trapped by pest detection lamps lead to low classification accuracy of existing models for rice pests. To address this issue, this paper proposes a small pest target detection and classification model (ViT-YOLOv5p) by integrating the YOLO backbone and Transformer module. First, the number of training samples is expanded through data augmentation during model training. Furthermore, appropriate noise data are introduced to enhance the robustness and generalization ability of the model. Before detection and classification, image cutting and stitching strategies are adopted to improve the detection accuracy of small objects. The bounding box of the pest is determined by the YOLO backbone, and the corresponding region is fed into the Transformer model to obtain the classification result. Finally, YOLOv5, Faster R-CNN, YOLOv4, and the proposed ViT-YOLOv5p are trained on the same dataset, with average detection time (ADT) and classification accuracy employed as evaluative metrics. The results show that ViT-YOLOv5p achieves the highest classification accuracy of 91.89% with an ADT of 50.41 ms. Compared with the commonly used Faster R-CNN, YOLOv5, and YOLOv4 models, the accuracy is improved by 1.50%, 8.71%, and 9.74%, respectively. This study provides a reference for agricultural pest detection, automatic insect classification systems, and deep learning-based detection of small agricultural targets.