National Innovation Platform for the Fusion of Industry and Education in Integrated Circuits, Department of Electronic Science, School of Electronic Science and Engineering, Xiamen University, Xiamen, China
Auto-generated profile, based on publicly available information
Xi Zheng
National Innovation Platform for the Fusion of Industry and Education in Integrated Circuits, Department of Electronic Science, School of Electronic Science and Engineering, Xiamen University, Xiamen, China
The optical and chromatic characteristics of InGaN-based micro-light-emitting diodes (micro-LEDs) grown on silicon substrates with blue, green, and red emissions have been investigated. The red micro-LEDs exhibited a large full-width at half maximum and a strong blueshift upon increasing current density. The 20 μm blue, green, and red micro-LEDs achieve a maximum external quantum efficiency of 8.2% at 2.65 A/cm2, 5.1% at 5 A/cm2, and 0.62% at 0.1 A/cm2, respectively, which is superior to their 8 μm counterparts. The dependences of a color gamut on the temperature and current density of InGaN-based tri-color micro-LEDs can provide guidance for improving the performance of full-color micro-LED displays.
In this study, we investigated the temperature-dependent photoluminescence characteristics of green InGaN/GaN multiple quantum wells (MQWs) with InGaN/GaN pre-wells and InGaN pre-layers, and the electroluminescence properties of the corresponding mini-LEDs were fabricated and studied. According to the fitting results of the temperature-dependent photoluminescence spectra obtained by the Vaishini and Arrhenius models, the S-shaped temperature-dependent peak energies of green InGaN/GaN MQWs grown on pre-wells and pre-layers indicated that these peaks originated from the localized state, and better crystal quality could be found in the MQWs with pre-layers. Moreover, we compared the electroluminescence properties of green mini-LEDs. These results demonstrate the advantages of growing green MQWs with an InGaN prelayer.
3 March 2023 in IEEE Transactions on Electron Devices
Electrical-chromatic characteristics of red, green, and blue micro-LEDs ( $10\times 10\,\,\mu \text{m}$ ) are investigated at temperatures ranging from 300 to 340 K. The external quantum efficiency (EQE) of red micro-LEDs decreases significantly with the increasement in temperature, suggesting that heat dissipation is crucial for red micro-LEDs. The impacts of temperature and driving current on the chromaticity coordinates of the light emission from micro-LEDs are determined. When the trichromatic micro-LEDs are driven by the currents corresponding to the maximum EQE, the influence of temperature on the color gamut is limited, facilitating the achievement of high color gamut and high efficiency.
The anomalous droop in the external quantum efficiency (EQE) induced by the localization of excitons in GaN/InGaN green micro-light-emitting diodes (micro-LEDs) has been demonstrated at temperatures ranging from 25 to 100 K. At cryogenic temperatures, the random distribution of excitons among local potential energy minima limits the radiative recombination and reduces the EQE of green micro-LEDs. As the temperature increases from 25 to 100 K, the hopping of excitons from shallow potential energy minima to the potential energy valley contributes to the enhancement of radiative recombination. The distribution of excitons among local potential energy minima at cryogenic temperatures is also affected by the current density due to the influence of Coulomb screening of the polarization field and the band-filling effect.
This study aimed to investigate the impact of mesa geometry on the light output characteristics of AlGaN-based 275 nm deep ultraviolet light-emitting diodes (DUV-LEDs). By dividing the original single-junction mesa into four parts and connecting them serially (four-in-one), high-voltage (HV) DUV-LEDs with rectangular, hexagonal, circular, triangular, and square submesas were realized, achieving significant enhancement of the light output power (LOP) and wall-plug efficiency (WPE). The LOP of HV DUV-LEDs with hexagonal submesas has been promoted substantially compared to that of the original DUV-LEDs. Among the investigated five different types of submesas, hexagonal-type HV DUV-LEDs can achieve the highest LOP and WPE due to the higher sidewall light extraction. Furthermore, it is also demonstrated that pulse current driving can reduce the self-heating effect of HV DUV-LEDs.