We report a micro-nuclear magnetic resonance (NMR) system compatible with multi-type biological/chemical lab-on-a-chip assays. Unified in a handheld scale (dimension: 14 × 6 × 11 cm 3 , weight: 1.4 kg), the system is capable to detect <;100 pM of Enterococcusfaecalis derived DNA from a 2.5 μL sample. The key components are a portable magnet (0.46 T, 1.25 kg) for nucleus magnetization, a system PCB for I/O interface, an FPGA for system control, a current driver for trimming the magnetic (B) field, and a silicon chip fabricated in 0.18 μm CMOS. The latter, integrated with a current-mode vertical Hall sensor and a low-noise readout circuit, facilitates closed-loop B-field stabilization (2 mT → 0.15 mT), which otherwise fluctuates with temperature or sample displacement. Together with a dynamic-B-field transceiver with a planar coil for micro-NMR assay and thermal control, the system demonstrates: 1) selective biological target pinpointing; 2) protein state analysis; and 3) solvent-polymer dynamics, suitable for healthcare, food and colloidal applications, respectively. Compared to a commercial NMR-assay product (Bruker mq-20), this platform greatly reduces the sample consumption (120×), hardware volume (175×), and weight (96×).
6 April 2021 in IEEE Journal of Solid-State Circuits
This article describes a 2.1-MHz relaxation oscillator (RxO) for energy-harvesting Internet-of-Things (IoT) sensor nodes. The RxO features an asymmetric swing-boosted RC network and a dual-path comparator to surmount the challenges of sub-0.5-V operation while achieving temperature resilience. The former enables alternating the common-mode voltages at the output of the RC network to facilitate the sub-0.5-V operation, while the latter is outfitted with a delay generator for tracking the temperature-sensitive delay of the comparator. Prototyped in 28-nm CMOS, the RxO occupies a tiny footprint of 5,200 $\mu \text {m}^{2}$ . The power consumption is 1.4 $\mu \text{W}$ at 0.35 V. The measured temperature stability is 158 ppm/°C (average of seven chips) over −20 °C–120 °C. It scores the best energy efficiency (667 fJ/cycle) among the reported MHz-range RxOs and has a figure-of-merit (181 dB) that compares favorably with the state-of-the-art.
12 July 2023 in IEEE Transactions on Quantum Engineering
Over the past decade, significant progress in quantum technologies has been made and, hence, engineering of these systems has become an important research area. Many researchers have become interested in studying ways in which classical integrated circuits can be used to complement quantum mechanical systems, enabling more compact, performant, and/or extensible systems than would be otherwise feasible. In this article—written by a consortium of early contributors to the field—we provide a review of some of the early integrated circuits for the quantum information sciences. CMOS and BiCMOS integrated circuits for nuclear magnetic resonance, nitrogen-vacancy-based magnetometry, trapped-ion-based quantum computing, superconductor-based quantum computing, and quantum-dot based quantum computing are described. In each case, the basic technological requirements are presented before describing proof-of-concept integrated circuits. We conclude by summarizing some of the many open research areas in the quantum information sciences for CMOS designers.
Complementary metal oxide semiconductor (CMOS) technology enables low-cost and large-scale integration of transistors and physical sensing materials on tiny chips (e.g., <1 cm2), seamlessly combining the two key functions of biosensors: transducing and signal processing. Recent CMOS biosensors unified different transducing mechanisms (impedance, fluorescence, and nuclear spin) and readout electronics have demonstrated competitive sensitivity for in vitro diagnosis, such as detection of DNA (down to 10 aM), protein (down to 10 fM), or bacteria/cells (single cell). Herein, we detail the recent advances in CMOS biosensors, centering on their key principles, requisites, and applications. Together, these may contribute to the advancement of our healthcare system, which should be decentralized by broadly utilizing point-of-care diagnostic tools.
7 July 2016 in IEEE Journal of Solid-State Circuits
This paper describes a 20 MHz micro-nuclear magnetic resonance (μNMR) transceiver (TRX) featuring a butterfly-coil input for chemical/biological assays. It enables integration with a 2D multi-electrode digital microfluidic (DMF) device inside a space-limited portable magnet (0.46 T, 1.25 kg), making multi-sample management compatible with μNMR measurements, and supporting electronic automation. The transmitter (TX) incorporates a pulse-sequence synthesizer followed by an inverter-based power amplifier (PA), to emit the exciting pulses for magnetizing the protons of the samples. For the receiver (RX), it is headed by a multi-stage low-noise amplifier (LNA) using NMOS-PMOS-complementary differential pairs, achieving a sub-nV/√Hz input-referred noise at low power. Sixth-order Butterworth low-pass filters constitute the core of the RX I/Q baseband. Their source-follower-based topology allows fast and coherent scaling of all poles by the bias current, reducing the dead-time of the RX for better sensitivity. Fabricated in 0.18 μm CMOS, the TRX occupies a die area of 2.1 mm 2 , consumes 6.6/23.7 mW of power in the TX/RX mode, and demonstrates the feasibility of electronic-automated biological (avidin) and chemical (CuSO 4 ) assays achieving a detection limit on avidin of 0.2 pmol.