Saudi Arabia’s arid and semi-arid regions suffer from water scarcity because of climatic constraints and rapid growth of domestic and industrial water uses. The growing demand for high-quality water supplies and to reduce the dependency on desalination creates an urgent need to explore groundwater resources as an alternative. The weighted overlay analysis method using the fuzzy-analytical hierarchy process (FAHP) multi-criteria decision making (MCDM) techniques combined with geoinformation technology was used in this study to explore the groundwater potential zones in the Itwad-Khamis watershed of Saudi Arabia. Twelve thematic layers were prepared and processed in a GIS setting to produce the groundwater potential zone map (GPZM). Subsequently, potential groundwater areas were delineated and drawn into five classes: very good potential, good potential, moderate potential, poor potential, and very poor potential. The estimated GWPZ (groundwater potential zones) was validated by analyzing the existing open wells distribution and the yield data of selected wells within the studied watershed. With this quality-based zoning, it was found that 82% of existing wells were located in a very good and good potential area. The statistical analysis showed that 14.6% and 28.8% of the total area were under very good and good, while 27.3% and 20.2% were accounted for the moderate and poor potential zone, respectively. To achieve sustainable groundwater management in the Aseer region, Saudi Arabia, this research provided a primary estimate and significant insights for local water managers and authorities by providing groundwater potential zone map.

Land surface temperature (LST) can fully reflect the water–heat exchange cycle of the earth surface that is important for the study of environmental change. There is little research on LST in the semi-arid region of Abha-Khamis-Mushyet, which has a complex topography. The study used LST data, retrieved from ASTER data in semi-arid mountain areas and discussed its relationship with land use/land cover (LULC), topography and the normalized difference vegetation index (NDVI). The results showed that the LST was significantly influenced by altitude and corresponding LULC type. In the study area, during the summer season, extreme high-temperature zones were observed, possibly due to dense concrete surfaces. LST among different types of land use differed significantly, being the highest in exposed rocky areas and built-up land, and the lowest in dense vegetation. NDVI and LST spatial distributions showed opposite trends. The LST–NDVI feature space showed a unique ABC obtuse-angled triangle shape and showed an overall negative linear correlation. In brief, the LST could be retrieved well by the emissivity derived NDVI TES method, which relied on upwelling, downwelling, and transmittance. In addition, the LST of the semi-arid mountain areas was influenced by elevation, slope zenith angle, aspect and LULC, among which vegetation and elevation played a key role in the overall LST. This research provides a roadmap for land-use planning and environmental conservation in mountainous urban areas.

Disastrous natural hazards, such as landslides, floods, and forest fires cause a serious threat to natural resources, assets and human lives. Consequently, landslide risk assessment has become requisite for managing the resources in future. This study was designed to develop four ensemble metaheuristic machine learning algorithms, such as grey wolf optimized based artificial neural network (GW-ANN), grey wolf optimized based random forest (GW-RF), particle swarm optimization optimized based ANN (PSO-ANN), and PSO optimized based RF for modeling rainfall-induced landslide susceptibility (LS) in Aqabat Al-Sulbat, Asir region, Saudi Arabia, which observes landslide frequently. To obtain very high precision and robust prediction from machine learning algorithms, the grey wolf and PSO optimization algorithms were integrated to develop new ensemble machine learning techniques. Subsequently, LS maps produced by training dataset were validated using the receiver operating characteristics (ROC) curve based on the testing dataset. Based on the area under curve (AUC) value of ROC curve, the best method for LS modeling was selected. We developed ROC curve-based sensitivity analysis to investigate the influence of the parameters for LS modeling. The Gumble extreme value distribution was employed to estimate the rainfall at 2, 5, 10, 20, 50, and 100 year return periods. Then, the landslide hazard maps were prepared at different return periods by integrating the best LS model and estimated rainfall at different return periods. The theory of danger pixels was employed to prepare a final risk assessment of the resources, which have been exposed to the landslide. The results showed that 27–42 and 6–15 km² were predicted as the very high and high LS zones using four ensemble metaheuristic machine learning algorithms. Based on the area under curve (AUC) of ROC, GR-ANN (AUC-0.905) appeared as the best model for LS modeling. The areas under high and very high landslide hazard were gradually increased over the progression of time (26 km² at the 2 year return period and 40 km² at the 100 year return period for the high landslide hazard zone, and 6 km² at the 2 year return period and 20 km² at the 100 year return period for the very high landslide hazard zone). Similarly, the areas of danger pixel also increased gradually from the 2 to 100 year return periods (37 km² to 62 km²). Various natural resources, such as scrubland, built up, and sparse vegetation, were identified under risk zone due to landslide hazards. In addition, these resources would be exposed extensively to landslides over the advancement of return periods. Therefore, the outcome of the present study will help planners and scientists to propose high precision management plans for protecting natural resources, which have been exposed to landslides.

Artificial Neural Networks (ANNs), the most popular and widely used Artificial Intelligence (AI) technology due to their proven accuracy and efficiency in control, estimation, optimization, decision making, forecasting, and many other applications, can be employed to achieve faster sustainable development of construction industry. The study presents state-of-the-art applications of ANNs to promote sustainability in the construction industry under three aspects of sustainable development, namely, environmental, economic, and social. The environmental aspect surveys ANNs’ applications in sustainable construction materials, energy management, material testing and control, infrastructure analysis and design, sustainable construction management, infrastructure functional performance, and sustainable maintenance management. The economic aspect covers financial management and construction productivity through ANN applications. The social aspect reviews society and human values and health and safety issues in the construction industry. The study demonstrates the wide range of interdisciplinary applications of ANN methods to support the sustainable development of the construction industry. It can be concluded that a holistic research approach with comprehensive input data from various phases of construction and segments of the construction industry is needed for the sustainable development of the construction industry. Further research is certainly needed to reduce the dependency of ANN applications on the input dataset. Research is also needed to apply ANNs in construction management, life cycle assessment of construction projects, and social aspects in relation to sustainability concerns of the construction industry.