Dharmendra Kumar

Dr. Dharmendra Kumar

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
MMMukuljeet Singh Mehrolia
Mukuljeet Singh Mehrolia
DKDharmendra Kumar
Dharmendra Kumar
AVAnkit Verma
Ankit Verma
ASAbhishek Kumar Singh
Abhishek Kumar Singh
The article examines the low-voltage organic thin film transistor’s (OTFTs) manufacturing and characterization process for hydrogen sulfide (H $_{\text{2}}$ S) gas sensing at room temperature and could be helpful at various emanating sites. The fabrication methodology utilizes a cost-efficient solution processed spin coating method for high- $\textit{k}$ dielectric (SrZrO $_{\text{x}}$ ) as a gate oxide and floating film transfer method (FTM) for silver nanoparticles doped PBTTT-C14 film for the active semiconductor layer. The developed spin-coated dielectric film offers a high capacitance of 433 nF/cm $^{\text{2}}$ with a high band gap of 4.95 eV. and also offers 0.1 nA/cm $^{\text{2}}$ leakage current density, which clarifies that the dielectric film has very less numbers of pin holes suitable for good-performing OTFT. The surface morphology of the dielectric film shows a very smooth dielectric film (rms roughness 0.245 nm), which demonstrates a high-quality dielectric/semiconductor interface offered by the dielectric film for the high performance of the device. On the other hand, the low-cost FTM deposited silver nanoparticles doped PBTTT-C14 active layer film is quite uniform (30 $\pm$ 3 nm thickness) and free from any anisotropic effect, which further improves the device performance for sensing applications. The developed sensor is deliberately characterized for H $_{\text{2}}$ S gas sensor shows a sensing response of 80% at 5 ppm. The sensor passes with a low detection limit of 15.17 ppb and exhibits a relative shift of 47.7% over 5 ppm H $_{\text{2}}$ S gas in threshold voltage. The developed device can be used in various gas emanating sites and oil industries.

26 August 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
MMMukuljeet Singh Mehrolia
Mukuljeet Singh Mehrolia
DKDharmendra Kumar
Dharmendra Kumar
AVAnkit Verma
Ankit Verma
ASAbhishek Kumar Singh
Abhishek Kumar Singh
This article describes a comprehensive study of fabrication, characterization, and compact modeling of the organic thin-film transistor (OTFT) that can find a variety of applications for the development of future-generation flexible and transparent circuits. Furthermore, these flexible and partial transparent devices are working at low operation voltage that can also cater to the need for low power requirements. Here, the PBTTT-C14 (conductive polymer) is used as an active semiconductor channel and polymer dielectric/inorganic oxide blend (PMMA and ${\text{SrZrO}}_{\textit{X}}\text{)}$ based hybrid dielectric) used as a gate oxide layer. The low-cost, minimal wastage floating film transfer (FTM) method and spin coating method are used to deposit the layer of organic semiconductor (OSC) channel and hybrid dielectric, respectively. The deposited dielectric thin film over the ITO-coated flexible substrate has been cured with UV processing, which has the advantage of a high-quality film with low-temperature processing steps. The atomic force microscopy (AFM) image of the dielectric film shows a uniform smooth (very low roughness $\sigma _{\text{rms}}$ $=$ 0.407 nm), confirming that the thin film passes with the very low number of surface defects, which is suitable for high-quality transistors. Meanwhile, the deposited organic semiconductor film using FTM is uniform and free from any anisotropy. The developed organic TFT has the ability to operate at a low voltage of $-$ 1.0 V and offers a high $I_{{\text{ON}}}$ / $I_{{\text{OFF}}}$ ratio of $\sim$ 0.5 $\times$ 10 $^{\text{5}}$ and a low threshold of $-$ 0.27 V and can be utilized in portable sensors and wearable and flexible electronic applications. The compact modeling of the device has been done to further analyze the performance of the OTFT-based inverter circuits.

24 August 2023
Verified
Book Chapter
Closed access
PDF file
DKDharmendra Kumar
Dharmendra Kumar
Ashutosh MishraAshutosh Mishra
Ashutosh Mishra
Shiv Nath ChaudhriShiv Nath Chaudhri
Shiv Nath Chaudhri
Navin Singh RajputNavin Singh Rajput
Navin Singh Rajput

6 June 2026 in Electronics
Verified
Journal Article
Open access
PDF file
DKDharmendra Kumar
Dharmendra Kumar
VJVibha Jain
Vibha Jain
Ashutosh MishraAshutosh Mishra
Ashutosh Mishra
Rakesh ShresthaRakesh Shrestha
Rakesh Shrestha
MSMahdi Sahlabadi
Mahdi Sahlabadi
Navin Singh RajputNavin Singh Rajput
Navin Singh Rajput
Precision in estimating the ripeness of fruits is critical in quality control and minimizing losses in supply chains of agricultural produce following harvesting. Conventional ripeness assessment techniques tend to be destructive, time-consuming and unsuited to monitoring in real-time. In order to avoid these drawbacks, this research suggests a cloud-integrated smart electronic nose (E-nose) system to predict fruit ripeness in a non-destructive and real-time manner. The system uses a low-priced, non-selective gas sensor array with an ESP8266-based Internet of Things (IoT) board to record volatile organic compound (VOC) signatures released at various maturation phases of fruits. The obtained sensor data will be sent to a cloud server to be preprocessed centrally and classified using machine learning, thus reducing the computational needs at the edge. There is a collection of 953 samples of the unripe, ripe, and rotten stages of banana under controlled conditions. Several supervised machine learning algorithms are tested, and methods of ensemble boosting proved to be more effective. The Light Gradient Boosting Machine (LightGBM) is the most accurate in terms of classification of 96.50% and weighted F1-score of 96.49%. The confusion matrix analysis shows that the majority of misclassifications are observed among the neighboring stages of ripeness, indicating the gradual biochemical changes. The system is practically applicable as visualization of the predicted ripeness levels occurs in real time via a mobile application. The suggested model provides a scalable, low-cost, and smart solution to precision agriculture, which can allow efficient, automated, and non-destructive measurement of fruit quality.

3 May 2026 in Sensors
Verified
Journal Article
Open access
PDF file
DKDharmendra Kumar
Dharmendra Kumar
VJVibha Jain
Vibha Jain
Ashutosh MishraAshutosh Mishra
Ashutosh Mishra
Rakesh ShresthaRakesh Shrestha
Rakesh Shrestha
Navin Singh RajputNavin Singh Rajput
Navin Singh Rajput
Classification of vehicle engines using the chemical composition of the exhaust from these engines can be used to identify the engine’s design and verify compliance with environmental regulations through the vehicle’s emissions. This paper describes a method to identify the type of vehicles using machine learning (ML), where low-cost MQ series sensors measure the gases and particle emissions from a vehicle exhaust system, while simultaneously collecting and measuring the vehicle’s temperature and humidity levels. A custom-designed multi-sensor exhaust sensing module is employed to capture real-time exhaust emissions prior to entering the atmosphere. Exhaust samples are collected from vehicles representing three major engine categories: petrol, diesel, and compressed natural gas (CNG). In addition, fresh air samples are collected as a baseline environmental reference for comparison. All exhaust measurements are collected under controlled and consistent engine operating conditions to ensure comparable emission profiling across vehicle classes. To ensure consistent combustion-based emission profiling, this study focuses on conventional fuel-powered vehicles. MQ-series gas sensors are sensitive to combustion by-products emitted during engine operation, such as carbon monoxide (CO), hydrocarbons (HC), while also exhibiting cross-sensitivity to other gaseous components present in exhaust mixtures. Nevertheless, the proposed system performs pattern-based classification using relative sensor response signatures. Standardization of data is achieved through z-score normalization. The best models developed (based on three separate experimental designs) are trained and validated using six supervised machine learning algorithms such as Logistic Regression, Support Vector Machine (RBF), k-Nearest Neighbors, Random Forest, Gradient Boosting Decision Tree, and XGBoost and are compared against one another. Evaluation of the tested algorithms using various evaluation metrics demonstrated that ensemble models outperformed all other algorithms, achieving the highest accuracy of 99.5%. Furthermore, noise analysis confirms that the proposed solution maintains high classification accuracy (more than 89%) even under substantial sensor perturbations mimicking the real-world deployment. The solution proposed below illustrates how using gas sensors and advanced algorithms can provide accurate exhaust identification and identify engines in real-time.

16 April 2026 in Electronics
Verified
Journal Article
Open access
PDF file
DKDharmendra Kumar
Dharmendra Kumar
ARAnup Kumar Rabha
Anup Kumar Rabha
Ashutosh MishraAshutosh Mishra
Ashutosh Mishra
Rakesh ShresthaRakesh Shrestha
Rakesh Shrestha
Navin Singh RajputNavin Singh Rajput
Navin Singh Rajput
The increasing risk of air pollution in closed areas like passenger vehicles requires smart and real-time air quality reading solutions. Gases such as carbon monoxide (CO)—which is colorless and odorless and is produced by exhaust systems—air conditioners, and combustion sources are very dangerous to health because they can cause respiratory distress and poisoning at high levels. Traditional in-vehicle CO monitoring systems use a single-point sensor and a fixed threshold, which are insufficient in a dynamic cabin environment subject to factors such as vehicle size, ventilation rate, number of occupants, and incoming traffic. To address these drawbacks, this paper proposes a new E-Nose system with Virtual Sensor-Augmented Embedded Intelligence to estimate the CO concentration in vehicle cabins in real time. The system combines data from cheap gas sensors and improves it using virtual sensor machine learning models trained to predict or enhance sensor responses in real time. Embedded intelligence, deployed locally on edge hardware, supports low-latency processing, dynamic calibration, and noise filtering to respond to fluctuating environmental conditions adaptively. This architecture enables more accurate, robust, and context-aware estimation of CO levels compared to traditional threshold-based methods. Experimental validation across varied vehicular scenarios demonstrates superior precision and responsiveness, providing timely warnings even under complex dispersion patterns. Classifier Gradient Boosting, which builds an ensemble of weak learners sequentially, matched the Random Forest with 99.94% training and 98.59% model accuracy, confirming its strong predictive capability. The system is designed to be cost-effective, scalable, and easily integrable into modern automotive platforms. This study also contributes to the field of smart ecological recording and demonstrates the effectiveness of the virtual sensor-enhanced embedded system as an effective way to improve passenger safety by providing pre-emptive on-board air quality monitoring.