Historic buildings exhibit coupled response characteristics during long-term service, characterized by slowly varying global inclination evolution superimposed with local component-level deformation. Meanwhile, multi-source measurements are susceptible to environmental noise and structural non-integrality, which poses challenges to obtaining stable and physically interpretable inclination measurements. To address these issues, this study proposes a multi-source fusion monitoring method for global inclination and local deformation of historic buildings using an extended Kalman filter with fractional-order state modeling (FEKF). A state-space model incorporating global inclination, local component-level additional deformation, and their projection relationships is established, in which global inclination information derived from Global Navigation Satellite System (GNSS) and local observations obtained from inclinometers are formulated within a unified measurement framework. Fractional-order dynamics are introduced into the state evolution model to represent the long-memory and non-stationary characteristics of structural responses in historic buildings. By adopting a finite-memory approximation, the fractional-order model is embedded into the extended Kalman filtering framework, enabling joint estimation and physical decoupling of multi-source measurements. Numerical simulation results demonstrate that the proposed method can stably separate global inclination and local deformation components under noisy conditions, while improving the stability of global inclination estimation. Further validation using measured data from a historic building shows that the fusion results effectively suppress high-frequency disturbances in GNSS measurements and allow reliable reconstruction of local component-level inclination responses, indicating good stability and practical applicability. These results demonstrate that the proposed approach provides a physically consistent and robust solution for long-term posture and deformation monitoring of historic buildings.
Cropland parcels are fundamental units in agricultural production, and their precise delineation is critical for cadastral management and precision agriculture. However, heterogeneous agricultural landscapes with fragmented patches, complex land cover, and indistinct boundaries pose significant challenges for automated parcel delineation. Unmanned aerial systems (UASs) offer flexible, high-resolution multi-temporal spectral and elevation data, providing potential opportunities for mapping patched parcels. This study proposed an automated method for mapping patched cropland parcels using centimeter-level digital surface models (DSMs) and digital orthophoto maps (DOMs), validated at three typical sites in the Sichuan Basin. The method integrates (1) threshold segmentation of topographic relief to distinguish field surfaces from borders; (2) vegetation removal using a visible-band difference vegetation index (VDVI) mask; and (3) morphological refinement to produce high-precision vectorized field polygons. Results show that integrating bi-temporal UAS elevation and spectral data enables accurate, automated field extraction. Area-based mapping accuracy reached 98.1%, with an overall accuracy (OA) of 96.1% and a Kappa coefficient (KC) of 0.92. Field-count correctness was 93.3%, and the relative error of boundary length was 4.55%. Notably, parcels with regular shapes achieved even higher accuracy, with OA of 99.1% and KC of 0.98. By leveraging UAS-based elevation and spectral data, the proposed method can offer an alternative way to precise delineation of patched field boundary and provides reliable technical support for cadastral mapping and cropland surveys in agricultural regions.