This work evaluates a continuous biomass hydrothermal carbonization process through modeling and steady state simulation using the UniSim Design process simulator. The reactive process was divided into four stages: biomass hydrolysis, intermediate compounds degradation, aromatics formation, and polymerization process, which make it possible to obtain the solid product or hydrochar. Pure biomass types and their mixtures were compared, considering hydrochar and carbon yields, H/C, and O/C ratios, and their deviation from the batch process. The results of hydrochar yield indicated that biomass with high cellulose content can perform satisfactorily in the proposed model. In addition, the possibility of carrying out the process in reactive stages together with the recirculation of liquid product, allowed a greater yield with respect to the batch process. It is concluded that the proposed model improves the characteristics of the obtained hydrochar compared to its crude biomass, achieving lower proportions of hydrogen and oxygen in the solid product.
The effect of magnesium chloride as an additive of hydrothermal carbonization (HTC) of lignocellulosic biomass (Pinus radiata sawdust) was studied. The HTC tests were carried out at fixed conditions of temperature and residence time of 220 °C and 1 h, respectively, and varying the dose of magnesium chloride in the range 0.0–1.0 g MgCl2/g biomass. The carbonized product (hydrochar) was tested in order to determine its calorific value (HHV) while using PARR 6100 calorimeter, mass yield by gravimetry, elemental analysis using a LECO TruSpec elemental analyzer, volatile matter content, and ash content were obtained by standardized procedures using suitable ovens for it. The results show that using a dose of 0.75 g MgCl2/g biomass results in an impact on the mass yield that was almost equal to change operating conditions from 220 to 270 °C and from 0.5 to 1 h, without additive. Likewise, the calorific value increases by 33% for this additive dose, resulting in an energy yield of 68%, thus generating a solid fuel of prominent characteristics.
1 February 2018 in International Journal of Hydrogen Energy
The objective of this study was to identify and experimentally validate novel antioxidant peptides derived from salmon collagen through an integrated bioinformatic and experimental workflow. Collagen sequences from Salmo salar were subjected to in silico enzymatic hydrolysis, and the resulting peptides were characterized using physicochemical descriptors. Principal component analysis and k-means clustering were then applied as exploratory tools to prioritize candidates displaying physicochemical proximity to previously reported antioxidant peptides. The selected candidates were chemically synthesized, purified, and evaluated at concentrations of 0.2 and 0.4 mM using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging assay, the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical-scavenging assay, and a cellular antioxidant activity assay, with vitamin C as a positive control. Cytotoxicity was assessed using the WST-1 assay. The peptide AS-5390 (DGCERCF) demonstrated superior radical scavenging capacity, with activity comparable to that of vitamin C in the DPPH assay at 0.2 mM and maintaining antioxidant activity in the ABTS assay at both tested concentrations. The peptide AS-5394 (PGDIG) exhibited the strongest cellular antioxidant response, reaching approximately 40% activity at 0.4 mM. Both peptides maintained high cell viability. Overall, this integrated strategy enabled the identification of salmon collagen-derived peptides with assay-dependent antioxidant activity and potential applications as functional food or nutraceutical ingredients.
Reverse electrodialysis (RED) is an emerging process intensification technology for sustainable energy generation from the salinity gradient between concentrated brines and dilute streams. Concentrated brines, generated in large volumes by seawater reverse osmosis (SWRO) desalination, mining operations, and saltworks, represent an abundant and underutilised resource whose energetic valorisation via RED can simultaneously reduce brine disposal impacts and contribute to decarbonising the water-energy nexus. This review critically examines existing simulation and modelling approaches for RED systems applied to concentrated brines, covering ion transport models, thermodynamic and exergy frameworks, semi-empirical stack models, multi-physics computational fluid dynamics (CFD), and data-driven machine learning (ML) methods. The review identifies the principal knowledge gaps limiting large-scale deployment: the incomplete description of multicomponent, multivalent ion transport in real brines; the translation of validated laboratory models to pilot and industrial stacks; and the absence of techno-economic and life-cycle analysis integrated with process models. Future research should focus on hybrid models that couple high-fidelity electrochemical simulation with experimental calibration, ML-accelerated parametric studies, and system-level integration of RED with reverse osmosis and membrane distillation. This work provides a structured assessment of current modelling capabilities and a roadmap for simulation-driven optimisation of RED technology.
Reverse electrodialysis (RED) is an emerging process intensification technology for sustainable energy generation from the salinity gradient between concentrated brines and dilute streams. Concentrated brines, generated in large volumes by seawater reverse osmosis (SWRO) desalination, mining operations, and saltworks, represent an abundant and underutilised resource whose energetic valorisation via RED can simultaneously reduce brine disposal impacts and contribute to decarbonising the water-energy nexus. This review critically examines existing simulation and modelling approaches for RED systems applied to concentrated brines, covering ion transport models, thermodynamic and exergy frameworks, semi-empirical stack models, multi-physics computational fluid dynamics (CFD), and data-driven machine learning (ML) methods. The review identifies the principal knowledge gaps limiting large-scale deployment: the incomplete description of multicomponent, multivalent ion transport in real brines; the translation of validated laboratory models to pilot and industrial stacks; and the absence of techno-economic and life-cycle analysis integrated with process models. Future research should focus on hybrid models that couple high-fidelity electrochemical simulation with experimental calibration, ML-accelerated parametric studies, and system-level integration of RED with reverse osmosis and membrane distillation. This work provides a structured assessment of current modelling capabilities and a roadmap for simulation-driven optimisation of RED technology.