In order to improve the dispersibility and uneven distribution of carbon nanotubes (CNTs) in the copper matrix, the surface of CNTs were modified to enhance their dispersibility in the copper matrix. In this paper, different concentrations (7.5%, 15%, 30%) of HNO3 were used to functionalize the surface of CNTs to improve the chemical inertness of CNTs, and surface modification was performed on the purified and de-hybridized CNTs to make the CNTs better dispersed in the metal matrix. At the same time, the mechanical properties and electrical conductivity of the carbon nanotube-reinforced copper-based composites were analyzed. According to research result, 15% HNO3 combined with subsequent surface treatment have the best effect on surface modification of CNTs, significantly improving the dispersibility of CNTs and better exerting the excellent coordination effect of CNTs in copper-based composite. In addition, it is confirmed that the obtained Cu-CNTs/Cu composites have excellent comprehensive properties, which provide a new idea to improve the characteristics of copper-based composites doped with CNTs. GRAPHICAL ABSTRACT
31 December 2025 in IEEE Transactions on Transportation Electrification
Accurate temperature monitoring is crucial for the safe operation of large-format prismatic lithium-ion batteries. However, the significant thermal heterogeneity across the battery surface and localized heating caused by the high internal resistance of the positive electrode make it difficult to characterize the thermal characteristics of the battery through a single point temperature. Furthermore, the limited number of temperature sensors in practical applications presents a huge challenge to high-precision temperature monitoring. To address these challenges, a novel sensorless state-of-temperature (SOT) estimation framework based on a dual-heat-source eight-node thermal network model is developed in this study. Independent heat sources are strategically positioned at both the cathode interface and the core of the battery, and an eight-node simplified thermal transfer model architecture is established, which effectively balances computational accuracy with model complexity. Then, with the terminal voltage serving as the observation variable, a closed-loop observation system for state of charge (SOC) and SOT joint estimation is constructed based on the extended Kalman filter (EKF) algorithm, achieving real-time high-precision estimation of multipoint temperature in lithium-ion batteries under dynamic environmental conditions. The proposed method is evaluated under various operating conditions, including multiple noise environments, different driving simulation conditions. Results show that the root mean square error (RMSE) of the SOT estimation after system stabilization remains around $1.67~^{\circ }$ C.
High-temperature superconducting twisted stacked conductors are one of the promising candidates for fusion magnets and particle acceleration magnets due to their higher critical current density, better mechanical strength, thermal stability, and complete translocation. We investigated the magnetization AC losses of multi-slot stacked twisted conductors without interlayer insulation using calorimetry and measured the losses incurred by the tapes after the removal of the skeleton. The magnetization loss of this conductor was calculated using the three-dimensional T-A equation and compared with the measured results of the calorimetric method. The results of this article will provide magnetization loss data to support the optimal design of multi-slot stacked conductors.