As a success-oriented system reliability and safety-analysis technique, the GO methodology has been applied in a variety of real-world safety-critical industrial fields. Common-cause failure (CCF) is the simultaneous failure of multicomponents within a system due to the same root cause. An enhancement approach for the original GO methodology is proposed in this paper to support CCF modeling and calculation both in graphical modeling aspect and algorithm aspect. First, a new concise and formalized GO operator (named CCO) is introduced to represent complicated CCF event, which makes the CCF modeling process intuitive and concise for analysts. In algorithm aspect, the mapping rule is given and demonstrated to transform new CCO operator with impacted multiple operators to the corresponding Bayesian network (BN) fragment. Second, general mapping programmable process is presented on transforming any CCF enhanced GO model to the corresponding BN. Furthermore, using BN's inference capability, the enhanced GO model with CCF can be calculated efficiently. Nevertheless, the diagnosis process can be performed to investigate the weak points of the modeled system. Finally, a case study is performed to demonstrate the modeling process by means of CCF enhanced GO model. The calculation result shows that CCF has significant influence on the system reliability. Using diagnosis analysis, the CCF event can be confirmed as the major cause leading to system failure.
1 September 2018 in Journal of Aerospace Engineering
Thermal vacuum and swivel table tests of a control moment gyroscope (CMG) are designed and the start-up hesitation and rotation break of the CMG are analyzed. In order to study the fault mechanism, a thermo-structural coupling simulation was performed on the CMG under the temperature conditions of 60°C and approximately 20°C, as well as the static and dynamic working conditions of the swivel table and gimbal. The simulation results show that the main reason for the start-up hesitation and rotation break of the gimbal is an elliptical deformation in different circumferential positions of the gimbal shell and the gimbal bearing. Under certain combinations of temperature and dynamic conditions, the shrinkage of the radial and axial clearances of the gimbal bearing causes the faults, which is consistent with the test results. The test and simulation results are also helpful in determining the temperature limits of the CMG under different conditions and can help improve their thermal design.