This paper studies the corrosion behavior of B10 copper-nickel alloy in marine environment. Accelerated degradation test under marine environmental conditions was designed and performed based on the accelerated testing principle and the corrosion degradation mechanism. With the prolongation of marine corrosion time, the thickness of Cu2O film increased gradually. Its corrosion product was Cu2(OH)3Cl, which increased in quantity over time. Cl− was the major factor responsible for the marine corrosion of copper and copper alloy. Through the nonlinear fitting of corrosion rate and corrosion quantity (corrosion weight loss), degradation data of different corrosion cycles, the quantitative effects of two major factors, i.e., dissolved oxygen (DO) and corrosion medium temperature, on corrosion behavior of copper alloy were analyzed. The corrosion failure prediction models under different ambient conditions were built. One-day corrosion weight loss under oxygenated stirring conditions was equivalent to 1.31-day weight loss under stationary conditions, and the corrosion rate under oxygenated conditions was 1.31 times higher than that under stationary conditions. In addition, corrosion medium temperature had a significant effect on the corrosion of B10 copper sheet.
As a success-oriented system reliability and safety-analysis technique, the GO methodology has been applied in a variety of real-world safety-critical industrial fields. Common-cause failure (CCF) is the simultaneous failure of multicomponents within a system due to the same root cause. An enhancement approach for the original GO methodology is proposed in this paper to support CCF modeling and calculation both in graphical modeling aspect and algorithm aspect. First, a new concise and formalized GO operator (named CCO) is introduced to represent complicated CCF event, which makes the CCF modeling process intuitive and concise for analysts. In algorithm aspect, the mapping rule is given and demonstrated to transform new CCO operator with impacted multiple operators to the corresponding Bayesian network (BN) fragment. Second, general mapping programmable process is presented on transforming any CCF enhanced GO model to the corresponding BN. Furthermore, using BN's inference capability, the enhanced GO model with CCF can be calculated efficiently. Nevertheless, the diagnosis process can be performed to investigate the weak points of the modeled system. Finally, a case study is performed to demonstrate the modeling process by means of CCF enhanced GO model. The calculation result shows that CCF has significant influence on the system reliability. Using diagnosis analysis, the CCF event can be confirmed as the major cause leading to system failure.
In this paper, a molecular dynamics (MD) simulation model of carbon-fiber/pyrolytic-carbon (Cf/PyC) interphase in carbon/carbon (C/C) composites manufactured by the chemical vapor phase infiltration (CVI) process was established based on microscopic observation results. By using the MD simulation method, the mechanical properties of the Cf/PyC interphase under tangential shear and a normal tensile load were studied, respectively. Meanwhile, the deformation and failure mechanisms of the interphase were investigated with different sizes of the average length of fiber surface sheets. The empirical formula of the interfacial modulus and strength with the change of was obtained as well. The shear properties of the isotropic pyrolysis carbon (IPyC) matrix were also presented by MD simulation. Finally, the mechanical properties obtained by the MD simulation were substituted into the cohesive force model, and a fiber ejection test of the C/C composite was simulated by the finite element analysis (FEA) method. The simulation results were in good agreement with the experimental ones. The MD simulation results show that the shear performance of the Cf/PyC interphase is relatively higher when is small due to the effects of non-in-plane shear, the barrier between crystals, and long sheet folding. On the other hand, the size of has no obvious influence on the interfacial normal tensile mechanical properties.
1 January 2021 in IOP Conference Series: Materials Science and Engineering
Space deployable mechanisms refer to the mechanisms that can be folded into a compact configuration and be deployed into a large predetermined shape. With the development of deep-space exploration, deployable mechanisms become one of the best choices for the deep- space probes. Large-scale, large folding ratio, high stiffness and lightweight have become the development trend of deployable mechanisms, leading to the high demands for validation of the field test. During the design and production stage, many special tests for the mission goals and the space environment need to be carried out besides the traditional spacecraft tests. In this paper, some typical tests of deployable mechanism for deep space exploration are analysed, the scheme and the performance of the special test program are summarized, such as the low gravity simulation and the vibration test. In addition, some suggestion is also made for future test methods and technology development.