Biofilm-associated infections caused by an accumulation of micro-organisms and pathogens significantly impact the environment, health risks, and the global economy. Currently, a non-biocide-releasing superhydrophobic surface is a potential solution for antibacterial purposes. This research demonstrated a well-designed robust polydimethylsiloxane (PDMS) micro-structure and a flame treatment process with improved hydrophobicity and bacterial anti-adhesion properties. After the flame treatment at 700 ± 20 °C for 15 s, unique flower-petal re-entrant nano-structures were formed on pillars (PIL-F, width: 1.87 ± 0.30 μm, height: 7.76 ± 0.13 μm, aspect ratio (A.R.): 4.14) and circular rings with eight stripe supporters (C-RESS-F, width: 0.50 ± 0.04 μm, height: 3.55 ± 0.11 μm, A.R.: 7.10) PDMS micro-patterns. The water contact angle (WCA) and ethylene glycol contact angle (EGCA) of flame-treated flat-PDMS (FLT-F), PIL–F, and C–RESS-F patterns were (133.9 ± 3.8°, 128.6 ± 5.3°), (156.1 ± 1.5°, 151.5 ± 2.1°), and (146.3 ± 3.5°, 150.7 ± 1.8°), respectively. The Escherichia coli adhesion on the C-RESS-F micro-pattern with hydrophobicity and superoleophobicity was 42.6%, 31.8%, and 2.9% less than FLT-F, PIL-F, and Teflon surfaces. Therefore, the flame-treated C-RESS-F pattern is one of the promising bacterial anti-adhesion micro-structures in practical utilization for various applications.

In this study, we investigated the impact of polyvinyl alcohol (PVA) incorporation on the optical properties and oxygen detection performance of a titanium dioxide/methylene blue (TiO₂/MB) nanocomposite colorimetric indicator for packaging applications. The nanocomposite was synthesized via mechanical milling of TiO₂ nanoparticles with MB and citric acid. PVA, at varying concentrations (0, 3, 9, and 14 wt%), was introduced during the wet milling process to produce a homogeneous composite film. Spin coating was employed to fabricate TiO₂/MB nanocomposite films for oxygen detection evaluation. The influence of PVA loading on the films’ chemical functionalities and surface morphologies was assessed using Fourier-transform infrared spectroscopy (FTIR) and field-emission scanning electron microscopy (FE-SEM). The indicator’s activation process, involving a color change between bleached and colored states, and its recovery time were monitored via optical imaging and UV-VIS-NIR spectrophotometry. The results revealed that a PVA content of 9 wt% yielded well-defined films with enhanced stability of the TiO₂/MB nanocomposite’s oxygen detection performance.

The increasing demand for sustainable and cost-effective energy storage solutions has driven interest in biomass-derived carbon materials for supercapacitor electrodes. This study explores the valorization of coconut residue (CR), an abundant agricultural waste, as a carbon precursor for nanoporous carbon (NPC) production. NPC was synthesized via hydrothermal carbonization (HTC) of CR, followed by chemical activation using potassium hydroxide (KOH) at varying temperatures (700, 800, and 900 °C). The effects of activation temperature on the structure and electrochemical performance of the NPC were systematically investigated. The activated materials exhibited amorphous, highly porous structures, with surface areas increasing alongside activation temperature—reaching a maximum of 1969 m² g⁻¹ at 900 °C. Electrochemical characterization was conducted using a three-electrode setup through cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) in a 1 M Na₂SO₄ electrolyte. The sample activated at 900 °C with a CR:KOH weight ratio of 1:2.5 achieved the highest specific capacitance of 52 F g⁻¹ at a specific current of 1 A g⁻¹. These findings underscore the potential of CR as a low-cost and sustainable raw material for fabricating efficient electrode materials in energy storage applications.