Carbonate reservoirs typically have complex pore structures, so the production wells typically have high production in the early production stage, but they decline rapidly. It is highly challenging to achieve accurate interpretation results. In this paper, a new and practical methodology for production data analysis of fractured and fractured-vuggy carbonate reservoirs is proposed. Firstly, analytical solutions to characterize the different multipore media and simulate transient production behavior of fractured and fractured-vuggy carbonate reservoirs during the transient flow regime are presented. Then, a new function and that related to the dimensionless production rate is introduced, and a series of new decline type curves are drawn to make a clear observation of different flow regimes. In addition, the effects of the storativity ratio, interporosity flow coefficient, skin factor, and dimensionless radial distance of external boundary on production performance are also analyzed. Finally, two example wells from the fractured and fractured-vuggy carbonate reservoirs are used to perform rate decline analysis with both the Blasingame type curves and the new type curves. The validation of the new method is demonstrated in comparison to the results of well test interpretation. The results show that the curves of vs. are -shaped for dual-porosity reservoirs and -shaped for triple porosity reservoirs and also indicate that the interpreted parameters such as permeability, skin factor, storativity ratio, and interporosity flow coefficient using new decline type curves are aligned well test interpretation. In correlation with other traditional well test analysis, this approach effectively reduces the multisolution probability of interpretation.

Water breaks through along fractures is a major concern in tight sandstone reservoirs with a bottom aquifer. Analytical models fail to handle the three-dimensional two-phase flow problem for partially penetrating inclined fractures, so time-consuming numerical simulation are often used for this problem. This paper presents an efficient semianalytical model for this problem considering three-dimensional fractures and two-phase flow. In the model, the hydraulic fracture is handled discretely with a numerical discrete method. The three-dimensional volumetric source function in real space and superposition principle are employed to solve the model analytically for fluid flow in the reservoir. The transient flow equations for flow in three-dimensional inclined fractures are solved by the finite difference method numerically, in which two-phase flow and stress-dependent properties are considered. The eventual solution of the model and transient responses are obtained by coupling the model for flow in the reservoir and discrete fracture dynamically. The validation of the semianalytical model is demonstrated in comparison to the solution of the commercial reservoir simulator Eclipse. Based on the proposed model, the effects of some critical parameters on the characteristics of water and oil flow performances are analyzed. The results show that the fracture conductivity, fracture permeability modulus, inclination angle of fractures, aquifer size, perforation location, and wellbore pressure drop significantly affect production rate and water breakthrough time. Lower fracture conductivity and larger inclination angle can delay the water breakthrough time and enhance the production rate, but the increment tends to decline gradually. Furthermore, water breakthrough will occur earlier if the wellbore pressure drop and aquifer size are larger. Besides, the stress sensitivity and perforation location can delay the water breakthrough time.