Tanveer Abbas

Mr. Tanveer Abbas

orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2006
Verified
Conference Paper
Closed access
TATanveer Abbas
Tanveer Abbas
MAMuhammad Arif
Muhammad Arif
WAWaqas Ahmed
Waqas Ahmed
This paper addresses an innovative method for the measurement and correction of systematic odometry errors caused by the kinematics imperfections in the differential drive mobile robots. An occasional systematic calibration of the mobile robot increases the odometric accuracy and reduces operational cost, as less frequent absolute positioning updates are required during the operation. Conventionally, the tests used for this purpose (e.g. UMBmark test) are relatively difficult to perform and are very sensitive to non-systematic errors and requires a large number of tests with precise measurements of the final position and orientation of the robot to get better accuracy. This paper describes a novel method for calibration of differential drive mobile robots. The method is systematic, very simple to perform and insensitive to the random errors and hence provides near optimal results (with respect to the systematic errors) in a single test due to its inherent robustness. Simulation results are presented which shows the significant improvement in the odometric accuracy with less effort

20 November 2020 in IEEE/ACM Transactions on Audio, Speech, and Language Processing
Verified
Journal Article
Closed access
SAShakeel Ahmed
Shakeel Ahmed
MTMuhammad Tufail
Muhammad Tufail
MRMuhammad Rehan
Muhammad Rehan
TATanveer Abbas
Tanveer Abbas
AMAmna Majid
Amna Majid
In active noise control systems, the performance of the most celebrated filtered-x-least mean square (FxLMS) adaptive algorithm is degraded in the presence of non-linearity in the secondary path. In this paper, we propose a novel approach to improve the performance of FxLMS algorithm in the presence of saturation type non-linearity in the secondary path. In the proposed method, the weights of the controller are adapted by minimizing a cost function consisting of two terms. The first term is the squared instantaneous residual error while the second term is the weighted square of the difference between input and output of (estimated) saturation non-linearity. Consequently, in case the saturation has occurred, the resultant adaptive algorithm minimizes the residual error while keeping the controller output close to its saturation limit. This avoids unnecessary fluctuation of the (controller) weights due to large variation (or windup) of the controller output after the saturation has occurred. Numerical simulations are provided to verify the superiority of the reported approach as compared to existing methods under different conditions.

1 December 2010
Verified
Conference Paper
Closed access
TATanveer Abbas
Tanveer Abbas
KAK.M. Abd-Elsalam
K.M. Abd-Elsalam
KKK.H. Khodairy
K.H. Khodairy
Heat generated by electronic devices and circuit must be dissipated to improve reliability and prevent premature failure. Techniques for heat dissipation can include heat sinks and fans for air cooling, and other forms of computer cooling such as liquid cooling. Computer cooling is the process of removing heat from computer components. Because a computer system's components produce large amounts of heat during operation, this heat must be dissipated in order to keep these components within their safe operating temperatures. In addition to maintaining normative function, Components which produce heat and are susceptible to performance loss and damage include integrated circuits such as CPUs, chipset and graphics cards, along with hard drives (though excessive cooling of hard drives has been found to have negative effects). Overheated parts generally exhibit a shorter maximum life-span and may give sporadic problems resulting in system freezes or crashes. Both integral (manufacturing) and peripheral means (additional parts) are used to keep the heat of each component at a safe operational level. With regard to integral means, CPU and GPUs are designed entirely with energy efficiency, including heat dissipation, in mind, and with each advance CPUs/GPUs generally produce less heat (though this increased efficiency is always used to increase performance, producing similar heat levels as earlier models anyway). Cooling through peripheral means is mainly done using heat sinks to increase the surface area which dissipates heat, fans to speed up the exchange of air heated by the computer parts for cooler ambient air, and in some cases soft cooling. Comparisons between traditional methods of CPU cooling, and new fashions of cooling (like Heat pipes, and Thermoelectric cooling) have been performed. Moreover, Thermal affects on processor performance, has been studied. Effect of time on heat transfer and processor temperature enhancement has been studied.

7 January 2024 in Iranian Journal of Science and Technology, Transactions of Electrical Engineering
Verified
Journal Article
Closed access
PDF file
TATanveer Abbas
Tanveer Abbas
Noman KhanNoman Khan
Noman Khan
MAMuhammad Sarmad Afzal
Muhammad Sarmad Afzal

19 January 2026 in IEEE Systems Journal
Verified
Journal Article
Closed access
KAMBIZ TEHRANIKAMBIZ TEHRANI
KAMBIZ TEHRANI
Noman KhanNoman Khan
Noman Khan
CDChouaib Djaghloul
Chouaib Djaghloul
TATanveer Abbas
Tanveer Abbas
Pierre BonnetPierre Bonnet
Pierre Bonnet
MJMo Jamshidi
Mo Jamshidi
Artificial intelligence (AI) is increasingly pivotal in modernizing the lifecycle of power electronic systems (PESs). Extending the discussion on the design and control phases presented in Part-I of the survey, Part II focuses on the transformative role of AI in the maintenance and forecasting phases of PES. Specifically, we analyze how AI techniques are applied to power electronic components, power electronic converters (PECs), and their emerging applications. This survey analyzes how AI techniques monitor PES’s health by detecting faults/anomalies, and estimating the remaining useful life (RUL), and in turn enable fault prevention before complete failure. Distinct from prior surveys, it also discusses soft-fault detection in complex wired networks such as aircraft, representing a system-of-systems application. In the context of forecasting, AI enables accurate prediction of PES parameters, such as power efficiency, thermal behavior, components’ lifetime, load demand, and energy generation. This survey identifies open challenges and provides forward-looking insight to guide researchers and engineers in developing robust, efficient, and autonomous maintenance and forecasting solutions for PES.

1 March 2023 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
MIMuhammad Zahid Iqbal
Muhammad Zahid Iqbal
AIAsif Israr
Asif Israr
TATanveer Abbas
Tanveer Abbas
Sinusoidal shock waveforms are the classical type of waveforms generated in Drop Test Machines (DTMs) using Rubber Wave Generators (RWGs). For different specifications of pulse, different RWGs are used, leading to the laborious work of replacing RWGs in DTMs. In this study, a novel technique is developed to predict a shock pulse of variable height and time using a Hybrid Wave Generator (HWG) that yields variable stiffness. This variable stiffness is a combination of the fixed stiffness of rubber and the variable stiffness of magnet. A mathematical nonlinear model has developed, consisting of a polynomial model of RWG and an integral approach of magnetic force. The designed HWG is capable enough to produce a strong magnetic force as a result of a high magnetic field generated in the solenoid. This magnetic force combines with rubber to give a variable stiffness effect. This way, a semi-active control of the stiffness and pulse shape is achieved. Two sets of HWGs are tested to study the control over the shock pulse. An average hybrid stiffness from 32 to 74 kN/m is observed by varying voltage from 0 to 1000 VDC, resulting in a change of height of pulse from 18 to 56 g (net change 38 g) and a change of shock pulse width from 17 to 12 ms (net change 5 ms). From experimental results, it is concluded that the developed technique gives satisfactory results for the control/prediction of variable shape shock pulse.