Existing task offloading mechanisms are developed on some single and rigid quality of service (QoS) performance metrics, which is widely apart from satisfying the true intent of a user vehicle (UV), thereby resulting in low quality of experience (QoE), large queuing latency, and poor reliability. There is an unprecedented demand for an intent-aware task offloading strategy that provides improved QoE and guarantees reliability. In this paper, we develop a novel task offloading framework for air-ground integrated vehicular edge computing (AGI-VEC), which is called the learning-based Intent-aware Upper Confidence Bound (IUCB) algorithm. IUCB enables a UV to learn the long-term optimal task offloading strategy while satisfying the long-term ultra-reliable low-latency communication (URLLC) constraints in a best effort way under information uncertainty. IUCB can achieve three-dimension intent awareness including QoE awareness, URLLC awareness, and trajectory similarity awareness. Simulation results demonstrate that IUCB significantly outperforms existing EMM, sleeping-UCB, and UCB mechanisms in terms of QoE, end-to-end delay, queuing delay, throughput, and times of task offloading failure.
This paper presents the design of a legged robot with gecko-mimicking mechanism and mushroom-shaped adhesive microstructure (MSAMS) that can climb surfaces under reduced gravity. The design principle, adhesion performance and roles of different toes of footpad are explored and discussed in this paper. The effect of the preload velocity, peeling velocity and thickness of backing layering on the reliability of the robot are investigated. Results show that pull-force is independent of preload velocity, while the peeling force is relying on peeling velocity, and the peel strength increased with the increasing thickness of the backing layer. The climbing experiments show that the robot can climb under mimic zero gravity by using multiple toes facilitating adhesion. The robot with new type of footpads also provides a good platform for testing different adhesive materials for the future space applications.
28 March 2025 in IEEE Transactions on Instrumentation and Measurement
In comparison to wheeled robots, the locomotion of bionic quadruped robots is more vigorous. Mapping systems should maintain satisfactory robustness and accuracy in various complex real-world scenarios, even when the robot’s body experiences intense shaking. To address these challenges, this study proposes a Simultaneous Localization and Mapping (SLAM) system based on LiDAR-inertial-camera fusion and a multi-modal multi-layer matching algorithm(LICFM3-SLAM). First, a tightly coupled strategy is utilized to fuse LiDAR, inertial, and camera information, introducing a visual-inertial odometry (VIO) subsystem based on adaptive graph inference; thus, high-precision and robust robot state estimation are achieved. Second, inspired by human spatial cognition, the study proposes a multimodal multi-layer matching algorithm and utilizes observation data obtained from the camera and LiDAR, thereby achieving accurate and robust data association. Finally, incremental poses are optimized using factor graph optimization methods; thus, a globally consistent 3D point cloud map is constructed. The proposed system is tested on a public benchmark dataset and applied to a bionic quadruped inspection robot(BQIR), and experiments are conducted in various challenging indoor and outdoor large-scale scenarios. The results reveal that LICFM3-SLAM exhibits high robustness and mapping accuracy while meeting real-time requirements.
Shear-induced adhesion is one of the key properties for the gecko moving safely and quickly in a three-dimensional environment. The control strategies of such locomotion strongly relying on adhesion are still not well understood. In this study, we measured foot alignment and three-dimensional reaction forces of the single toes of the Tokay gecko running on the ground freely (gravity condition) and running in a situation where the gravity force was counterbalanced (reduced gravity condition). The forelimb rotated from the outward position to the front-facing position and the hindlimb rotated from the outward position to the rear-facing position, when running with balanced force, which indicated that the adhesive system was employed behaviorally through the modulation of the foot alignment. The toe was compressed and pulled in the gravity condition, but it was tensed and pulled in the reduced gravity condition. There was an approximately linear relationship between peak normal forces and the corresponding shear forces in both the reduced gravity condition (FN = −0.40FS − 0.008) and the gravity condition (FN = 2.70FS − 0.12). The footpad was compressed and pushed in the gravity condition, whereas it was tensed and pulled in the reduced gravity condition. There was an approximately linear relationship between peak normal forces and the corresponding shear forces in both the reduced gravity condition (FN = −0.39FS − 0.001) and in the gravity condition (FN = −2.80FS − 0.08). The shear-induced adhesion of the gecko footpad is controlled by the coupling of the normal force and shear forces: that is why in this system adhesion was shear-sensitive and friction was load-sensitive. Our measurements of single toe reaction forces also show that geckos control their footpad attachment using ‘toe rolling-in and gripping’ motion in both gravity and reduced gravity conditions.