Liang Huang

Dr. Liang Huang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WZWei Zhou
Wei Zhou
YSYu-Gang Su
Yu-Gang Su
LHLiang Huang
Liang Huang
XQxiaodong Qing
xiaodong Qing
Aiguo Patrick HuAiguo Patrick Hu
Aiguo Patrick Hu
This paper proposes a method to transfer power across a metal barrier wirelessly by combined capacitive and inductive coupling. At the primary side of the power transfer system, a two plate coupling interface is designed to allow for a current flow in the metal barrier, which generates a magnetic field for transferring power via an inductive coil at the secondary side. The current distribution in the barrier is analyzed by taking the skin effect into consideration, based on which the magnetic field distribution around the barrier is determined. A 3D model is established using a Computer Simulation Technology(CST) package to simulate the magnetic field distribution, which gives consistent results compared to theoretical analysis. Finally, a wireless power transfer system is constructed, and practical measurements show that the magnetic flux density near edges of the metal barrier are higher than that in the middle region. The output power around edges is also higher although it is more sensitive to the variation of the distance and positioning of the receiving coil. It has demonstrated that more than 11W of power can be transferred across an aluminum plate when the pickup is placed at an edge of the plate along the current path.

31 January 2024 in Actuators
Verified
Journal Article
Open access
PDF file
HBHaotian Bai
Haotian Bai
Boon Giin LeeBoon Giin Lee
Boon Giin Lee
Guilin YangGuilin Yang
Guilin Yang
SWShen Wenjun
Shen Wenjun
SQShuwen Qian
Shuwen Qian
BYBohan Yu
Bohan Yu
Rigid robots have found wide-ranging applications in manufacturing automation, owing to their high loading capacity, high speed, and high precision. Nevertheless, these robots typically feature joint-based drive mechanisms, possessing limited degrees of freedom (DOF), bulky structures, and low manipulability in confined spaces. In contrast, continuum robots, drawing inspiration from biological structures, exhibit characteristics such as high compliance, lightweight designs, and high adaptability to various environments. Among them, cable-driven continuum robots (CDCRs) driven by multiple cables offer advantages like higher dynamic response compared to pneumatic systems and increased working space and higher loading capacity compared to shape memory alloy (SMA) drives. However, CDCRs also exhibit some shortcomings, including complex motion, drive redundancy, challenging modeling, and control difficulties. This study presents a comprehensive analysis and summary of CDCR research progress across four key dimensions: configuration design, kinematics and dynamics modeling, motion planning, and motion control. The objective of this study is to identify common challenges, propose solutions, and unlock the full potential of CDCRs for a broader range of applications.

28 October 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
WZWei Zhou
Wei Zhou
LHLiang Huang
Liang Huang
Bo LuoBo Luo
Bo Luo
Ruikun MaiRuikun Mai
Ruikun Mai
ZHZhengyou He
Zhengyou He
Aiguo Patrick HuAiguo Patrick Hu
Aiguo Patrick Hu
A general mutual coupling model of multiple input and/or multiple output (MIMO) capacitive coupling interface with an arbitrary number of ports is proposed. In the model proposed in this letter, all the capacitances between the metal plates are taken into account. The self-capacitance of each port and mutual capacitances between the two ports are defined, and a simple equivalent circuit composed of self capacitances and current-controlled voltage sources is obtained. The proposed model helps to reduce the complexity of the MIMO capacitive coupling interface and can be used to simplify the analysis of the power transfer performance of MIMO capacitive power transfer systems. An example capacitive coupling interface setup with two input ports and two output ports is built and tested. The measured and model-based theoretical results of the self and mutual capacitances of the capacitive coupling interface are compared and found to be in good consistency, which verifies the correctness of the proposed model.

14 March 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
WZWei Zhou
Wei Zhou
ZCZelin Chen
Zelin Chen
QZQiang Zhang
Qiang Zhang
ZLZhiqiang Li
Zhiqiang Li
LHLiang Huang
Liang Huang
ZHZhengyou He
Zhengyou He
High frequency is beneficial to reduce the volume and inter-plates voltage for capacitive power transfer (CPT) systems. Class-E power amplifier (PA) is a suitable high-frequency inverter because of its fewer components and higher reliability. However, the output current and zero-voltage switch (ZVS) of Class-E PA based CPT system is affected by load variations. In this paper, a 6.78 MHz Class-E PA based CPT system with wide-range ZVS and quasi-constant current (CC) output is proposed. The rectifier, capacitive coupler and Class-E PA are modeled. Based on these models, the influence of rectifier’s diode junction capacitances on its input impedance is analyzed. Then relationship between the Class-E PA’s equivalent load and the secondary-side impedance is given. A general ZVS boundary of Class-E PA with complex impedance load is studied, and the influence of diodes on the CC output of the system is researched. Finally, the parametric design and diodes selection methods aiming at wide-range ZVS and quasi-CC output for the system is proposed. A 144 W prototype is built and experimental results show the proposed system maintains ZVS operation and the fluctuation of output current is 6.1% when the load changes between 10 Ω and 135 Ω. The peak efficiency achieves 90.5%.

21 July 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ZYZhou Yan
Zhou Yan
CMChongyuan Ma
Chongyuan Ma
ZZZijian Zhang
Zijian Zhang
LHLiang Huang
Liang Huang
Aiguo Patrick HuAiguo Patrick Hu
Aiguo Patrick Hu
The ideal simultaneous wireless power and information transfer (SWPIT) system should share the same source and channel bandwidth. However, the requirements of the channel bandwidth between wireless power transfer (WPT) and wireless information transfer are different. In order to alleviate the effect of communications on the WPT, three bandwidths are redefined based on traditional communication systems, namely the modulation bandwidth, channel bandwidth and demodulation bandwidth. A square wave circuit is built to track the frequencies of signals at the receiver power coil, and the harmonic components in the same square wave are used to recreate information source to transmit data. Since the harmonic components can enlarge the deviations of the fundamental component, the needed channel bandwidth is decreased. The transmitter power coil and the receiver power coil still work under the quasi-resonant state with online communications. The communication function shows a strong immunity to various disturbances, such as distances, loads and input voltages. Based on the proposed method, two typical SWPIT systems in near-field and far-field are built, and the experimental data are consistent with the analytical results. The proposed SWPIT achieves a good tradeoff between efficiency and data transfer rate.

5 November 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WZWei Zhou
Wei Zhou
MLMengmeng Li
Mengmeng Li
QZQiang Zhang
Qiang Zhang
DTDingyuan Tang
Dingyuan Tang
LHLiang Huang
Liang Huang
ZHZhengyou He
Zhengyou He
For capacitive power transfer (CPT) systems, antimisalignment capability and receiver miniaturization remain critical challenges in practice, especially for modular CPT systems. This article proposes a magnetic integrated hybrid topology to address output fluctuations under misalignment and load variation conditions, while reducing receiver volume. First, a diagonal-plate four-port capacitive coupler is designed to form two independent capacitive coupling channels. Then, a hybrid compensation topology using magnetically integrated inductors (MIIs) is proposed for these two channels. The two channels with the hybrid topology exhibit complementary gain characteristics, enabling the CPT system to maintain constant output against alignment and load disturbances. Meanwhile, all receiver-side inductors are integrated on a pair of toroidal cores for miniaturization. Finally, a 1 kW experimental prototype is constructed, and the results show that the output voltage fluctuates within 10% when the coupler is misaligned within $\boldsymbol{\pm}$80 mm (x-direction), $\boldsymbol{\pm}$60$\surd{}$2 mm (x/y bisector), and $\boldsymbol{-}$5 to 9 mm (z-direction). The output voltage increase is not exceeded 18% as the load varies from 20 to 100 $\boldsymbol{\Omega}$. Additionally, the proposed MIIs reduces the volume of receiver-side inductors by 85.85% compared to the conventional three air-core inductor configuration.