The increasing demand for sustainable energy has driven significant research into efficient water splitting, particularly the development of electrocatalysts for the oxygen evolution reaction (OER) which is limited by sluggish kinetics.
6 February 2024 in Journal of the Taiwan Institute of Chemical Engineers
A polyacrylonitrile (PAN)-based immobilized metal-ion affinity membrane (IMAM) was prepared with a high capacity for protein adsorption. PAN was selected as the substrate due to its excellent thermal and chemical stability. The cyano groups on the PAN membrane were substituted with carboxyl groups, followed by reactions with ethylenediamine (EDA) and ethylene glycol diglycidyl ether (EGDGE) to produce the terminal epoxy groups. The chelating agent iminodiacetic acid (IDA) was then bound to the modified PAN membrane and further chelated with copper ions. The immobilized copper ion amount of membrane was analyzed to obtain the optimal reaction conditions, which were 60 °C/3 h for EDA coupling and 60 °C/4 h for EGDGE grafting. Furthermore, under the use of minor IDA and copper ion concentrations, the immobilized copper ion capacity of the IMAM was 4.8 μmol/cm2 (253.4 µmol/mL, or 1.47 μmol/mg). At a neutral pH, the cationic lysozyme exhibited a large adsorption capacity with the IMAM (1.96 μmol/mL), which was most likely multilayer binding, whereas the adsorption capacity for bovine serum albumin (BSA) and histidine-tagged green fluorescent protein (GFP-His6) was 0.053 μmol/mL and 0.135 μmol/mL, respectively, with a monolayer adsorption arrangement. The protein desorption efficiency was greater than 95%, implying that the prepared IMAM could be reused for protein adsorption.
This study investigates the non-uniformity (NU%) of copper deposition in a three-dimensional panel electroplating cell using COMSOL Multiphysics® 6.1 (COMSOL Inc., Burlington, MA, USA). To ensure the accuracy of the simulated current efficiency, the modeling was initially conducted on the electrodeposition of nanoscale metal wires (Nanowires, NWs) using the Finite Element Method (FEM) in COMSOL. After verifying that the simulation accurately reflected the current efficiency at the nanoscale, the model was scaled up to simulate full-sized panel-level electroplating. Various simulation conditions were explored, including two dimensional and three dimensional, electrode kinetics equations, electrolyte compositions, and current densities. The effects of these parameters on current efficiency and deposition uniformity were analyzed to develop a highly accurate COMSOL model. In terms of electrode kinetics, the study compares the advantages and limitations of secondary current distribution and tertiary current distribution models found in the previous literature, and evaluates their simulation results. Furthermore, to reflect the experimental condition where a pre-deposited copper seed layer was applied to reduce internal cathode resistance, the electrode shell physics module in COMSOL was implemented to simulate the potential distribution across the cathode surface. The results confirm that the numerical model using the tertiary current distribution provides more accurate predictions compared to the conventional secondary current distribution approach.
13 December 2025 in Journal of the Taiwan Institute of Chemical Engineers