Five-G heterogeneous network overlaid by millimeter-wave (mmWave) access employs mmWave meshed backhauling as a promising cost-efficient backhaul architecture. Due to the nature of mobile traffic distribution in practice which is both time-variant and spatially non-uniform, dynamic construction of mmWave meshed backhaul is a prerequisite to support the varying traffic distribution. Focusing on such scenario of outdoor dynamic crowd (ODC), this paper proposes a novel method to control mmWave meshed backhaul for efficient operation of mmWave overlay 5G HetNet through Software-Defined Network (SDN) technology. Our algorithm is featured by two functionalities, i.e., backhauling route multiplexing for overloaded mmWave small cell base stations (SC-BSs) and mmWave SC-BSs’ ON/OFF status switching for underloaded spot. In this paper, the effectiveness of the proposed meshed network is confirmed by both numerical analyses and experimental results. Simulations are conducted over a practical user distribution modeled from measured data in realistic environments. Numerical results show that the proposed algorithm can cope with the locally intensive traffic and reduce energy consumption. Furthermore, a WiGig (Wireless Gigabit Alliance certified) device based testbed is developed for Proof-of-Concept (PoC) and preliminary measurement results confirm the proposed dynamic formation of the meshed network’s efficiency.
8 April 2019 in Wireless Communications and Mobile Computing
Future mobile data traffic predictions expect a significant increase in user data traffic, requiring new forms of mobile network infrastructures. Fifth generation (5G) communication standards propose the densification of small cell access base stations (BSs) in order to provide multigigabit and low latency connectivity. This densification requires a high capacity backhaul network. Using optical links to connect all the small cells is economically not feasible for large scale radio access networks where multiple BSs are deployed. A wireless backhaul formed by a mesh of millimeter-wave (mmWave) links is an attractive mobile backhaul solution, as flexible wireless (multihop) paths can be formed to interconnect all the access BSs. Moreover, a wireless backhaul allows the dynamic reconfiguration of the backhaul topology to match varying traffic demands or adaptively power on/off small cells for green backhaul operation. However, conducting and precisely controlling reconfiguration experiments over real mmWave multihop networks is a challenging task. In this paper, we develop a Software-Defined Networking (SDN) based approach to enable such a dynamic backhaul reconfiguration and use real-world mmWave equipment to setup a SDN-enabled mmWave testbed to conduct various reconfiguration experiments. In our approach, the SDN control plane is not only responsible for configuring the forwarding plane but also for the link configuration, antenna alignment, and adaptive mesh node power on/off operations. We implement the SDN-based reconfiguration operations in a testbed with four nodes, each equipped with multiple mmWave interfaces that can be mechanically steered to connect to different neighbors. We evaluate the impact of various reconfiguration operations on existing user traffic using a set of extensive testbed measurements. Moreover, we measure the impact of the channel assignment on existing traffic, showing that a setup with an optimal channel assignment between the mesh links can result in a 44% throughput increase, when compared to a suboptimal configuration.
1 March 2021 in IEICE Transactions on Communications
In this paper, a Proof-of-Concept (PoC) architecture is constructed, and the effectiveness of mmWave overlay heterogeneous network (HetNet) with mesh backhaul utilizing route-multiplexing and Multi-access Edge Computing (MEC) utilizing prefetching algorithm is verified by measuring the throughput and the download time of real contents. The architecture can cope with the intensive mobile data traffic since data delivery utilizes multiple backhaul routes based on the mesh topology, i.e. route-multiplexing mechanism. On the other hand, MEC deploys the network edge contents requested in advance by nearby User Equipment (UE) based on pre-registered context information such as location, destination, demand application, etc. to the network edge, which is called prefetching algorithm. Therefore, mmWave access can be fully exploited even with capacity-limited backhaul networks by introducing the proposed algorithm. These technologies solve the problems in conventional mmWave HetNet to reduce mobile data traffic on backhaul networks to cloud networks. In addition, the proposed architecture is realized by introducing wireless Software Defined Network (SDN) and Network Function Virtualization (NFV). In our architecture, the network is dynamically controlled via wide-coverage microwave band links by which UE's context information is collected for optimizing the network resources and controlling network infrastructures to establish backhaul routes and MEC servers. In this paper, we develop the hardware equipment and middleware systems, and introduce these algorithms which are used as a driver of IEEE802.11ad and open source software. For 5G and beyond, the architecture integrated in mmWave backhaul, MEC and SDN/NFV will support some scenarios and use cases.
5G heterogeneous network overlaid by millimeter-wave (mmWave) access employs mmWave meshed backhauling as a promising cost-efficient backhaul architecture. Due to the nature of mobile traffic distribution in practice which is both time-variant and spatially non-uniform, dynamic construction of mmWave meshed backhaul is prerequisite to support the varying traffic distribution. Focusing on such scenario of outdoor dynamic crowd (ODC), this paper proposes a novel method to control mmWave meshed backhaul for efficient operation of mmWave overlay 5G HetNet through Software-Defined Network (SDN) technology. Our algorithm is featured by two functionalities, i.e., backhauling route multiplexing for overloaded mmWave small cell base stations (SC-BSs) and mmWave SC-BSs’ ON/OFF status switching for underloaded spot. In this paper, the effectiveness of the proposed meshed network is confirmed by both numerical analyses and experimental results. Simulations are conducted over a practical user distribution modeled from measured data in realistic environments. Numerical results show that the proposed algorithm can cope with the locally intensive traffic and reduce energy consumption. Furthermore, a WiGig (Wireless Gigabit Alliance certified) device based testbed is developed for Proof-of-Concept (PoC) and preliminary measurement results confirm the proposed dynamic formation of the meshed network’s efficiency.
Future mobile traffic growth will require 5G cellular networks to densify the deployment of small cell base stations (BS). As it is not feasible to form a backhaul (BH) by wiring all BSs to the core network, directional mmWave links can be an attractive solution to form BH links, due to their large available capacity. When small cells are powered on/off or traffic demands change, the BH may require reconfiguration, leading to topology and traffic routing changes. Ideally, such reconfiguration should be seamless and should not impact existing traffic. However, when using highly directional BH antennas which can be dynamically rotated to form new links, this can become time-consuming, requiring the coordination of BH interface movements, link establishment and traffic routing. In this paper, we propose greedy-based heuristic algorithms to solve the BH reconfiguration problem in real-time. We numerically compare the proposed algorithms with the optimal solution obtained by solving a mixed integer linear program (MILP) for smaller instances, and with a sub-optimal reduced MILP for larger instances. The obtained results indicate that the greedy-based algorithms achieve good quality solutions with significantly decreased execution time.