Seyyedeh Mahsa Sheikholeslamian

Dr. Seyyedeh Mahsa Sheikholeslamian

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Journal of Conservative Dentistry
Verified
Journal Article
Open access
PDF file
SSSeyyedeh Mahsa Sheikholeslamian
Seyyedeh Mahsa Sheikholeslamian
EHElham Hasani
Elham Hasani
ABAlireza Akbarzadeh Baghban
Alireza Akbarzadeh Baghban
ASAlireza Sadr
Alireza Sadr
Background: Since the introduction of resin composites, the staining of resin-based materials by colored solutions such as coffee, tea, chlorhexidine (CHX), and other beverages has become a common concern. Aim: The aim of this study was to evaluate the effect of home and office bleaching as a treatment for discoloration of composite after immersion in coffee or CHX. Materials and Methods: A microhybrid composite (Z250), nanohybrid composite (Z550), and nanofill composite (ultimate, body shade) were selected. Forty disk shape specimens (8 mm diameter and 2 mm thickness) for each composite were prepared then divided into two groups according to staining solutions (25 g of coffee in 250 ml water, 20 min/day or 0.2% CHX, 1 min/day). Following 1 month staining, specimens were divided into two groups again. Half of the specimens was bleached with in office bleaching agent (Opalescence Boost 40% hydrogen peroxide concentration) 3 times in one visit for 15minutes and the others subjected to home bleaching agent(Opalescence 10% carbamide peroxide) 6h/day until 2 weeks both from Ultradent Products, Inc., South Jordan, UT, USA. Color of the specimens was measured with a spectrophotometer using CIELAB color space at baseline, after 1 month staining, and after ending the bleaching process. Statistical Analysis: Analysis of variance was used to analyze the data (P < 0.05). Results: Coffee and CHX provided significant color changes in all groups (P < 0.05). Z550 was the material more prone to discoloration in coffee in comparison with Filtek Ultimate (P = 0.003). After bleaching, materials showed significant reduction except stained Z550 by coffee in home bleaching groups. Both home and office bleaching provided significant color changes in all CHX groups (P < 0.05). Conclusion: Coffee produced more color changes than CHX. The hydrogen peroxide has the same whitening effect in comparison with carbamide peroxide.

1 January 2020 in Restorative Dentistry & Endodontics
Verified
Journal Article
Open access
PDF file
MIMaryam Iravani
Maryam Iravani
SSSayna Shamszadeh
Sayna Shamszadeh
NPNarges Panahandeh
Narges Panahandeh
SSSeyyedeh Mahsa Sheikholeslamian
Seyyedeh Mahsa Sheikholeslamian
HTHassan Torabzadeh
Hassan Torabzadeh
Iravani M, et al. Restor Dent Endod. 2019 Nov;45:e41. /Synapse/10.5395/rde.2020.45.e41

12 April 2021 in International Journal of Biomaterials
Verified
Journal Article
Open access
PDF file
NPNarges Panahandeh
Narges Panahandeh
FAFatemeh Adinehlou
Fatemeh Adinehlou
SSSeyyedeh Mahsa Sheikholeslamian
Seyyedeh Mahsa Sheikholeslamian
HTHassan Torabzadeh
Hassan Torabzadeh
This study assessed the effect of addition of aqueous extract of propolis in different concentrations on the mechanical and antimicrobial properties of resin-modified glass ionomer cement (RMGIC). In this in vitro study, powder of Fuji II LC RMGIC was mixed with 25% and 50% aqueous extracts of propolis. Samples (n = 15 for shear bond strength, n = 5 for flexural strength, and n = 20 for the antibacterial activity test) were fabricated using this mixture. The buccal and lingual surfaces of 23 premolars were ground to expose dentin. Tygon tubes were filled with cement, bonded to dentin, and subjected to bond or the flexural strength test in a universal testing machine. Antibacterial activity was assessed using the disc diffusion and well-plate techniques against S. mutans. Data were analyzed using one-way ANOVA and Tukey’s test. The three groups showed significant differences (p < 0.001). The 50% propolis group had the lowest flexural and shear bond strength. The control group had the highest flexural and shear bond strength. No growth inhibition zone was noted around any of the discs. It can be concluded that addition of propolis to RMGIC did not confer any antibacterial activity against S. mutans and decreased the flexural and shear bond strength of RMGIC.

1 March 2019 in Journal of Alloys and Compounds
Verified
Journal Article
Closed access
MMMohammad Maleki
Mohammad Maleki
SSSeyyedeh Mahsa Sheikholeslamian
Seyyedeh Mahsa Sheikholeslamian
EHElham Hasani
Elham Hasani
AGAmir Ghasemi
Amir Ghasemi

16 February 2023 in International Journal of Dentistry
Verified
Journal Article
Open access
PDF file
AGAmir Ghasemi
Amir Ghasemi
AMAnoosh Mohammadzadeh
Anoosh Mohammadzadeh
MMMehdi Molaei
Mehdi Molaei
SSSeyyedeh Mahsa Sheikholeslamian
Seyyedeh Mahsa Sheikholeslamian
MKMandana Karimi
Mandana Karimi
Objectives. This in vitro study was aimed to assess the effect of wet and dry finishing and polishing techniques on the flexural strength and microhardness of different commercial nanoparticle contained composite resins. Methods and Materials. The samples were made of Z250 (microhybrid), Z350 XT (nanofilled), and Z550 (nanohybrid) resin composites. Each group was subdivided into 2 subgroups according to polishing protocols. Subgroup 1 for each composite underwent wet polishing, and subgroup 2 was subject to dry polishing technique. Flexural strength and microhardness of the samples were measured at two different times of polishing (T0 and T24). The flexural strength test and microhardness test were measured by a 3-point bending test using a universal testing machine, and a Vickers machine, respectively. Data were analyzed by Kolmogorov–Smirnov, two-way ANOVA, and Tukey HSD tests. Results. ANOVA showed that the type of composite has a significant effect on flexural strength. Two-way ANOVA showed that, at T0, flexural strength of all composites in the dry technique was higher than in the wet technique ( ). At T24, Z350 XT had the lowest, and Z250 had the highest flexural strength in both techniques. The time and technique of polishing were also significantly effective on hardness. At T0, hardness was higher in the wet compared to the dry method ( ). Tukey test showed that, at T24, the hardness of Z350 XT was significantly higher than the other materials in both techniques. Conclusion. Immediate wet finishing and polishing presented lower flexural strength. Delayed dry/wet finishing and polishing significantly enhanced the hardness of the samples.

1 January 2017 in Restorative Dentistry & Endodontics
Verified
Journal Article
Open access
PDF file
NPNarges Panahandeh
Narges Panahandeh
HTHassan Torabzadeh
Hassan Torabzadeh
HNHani Naderi
Hani Naderi
SSSeyyedeh Mahsa Sheikholeslamian
Seyyedeh Mahsa Sheikholeslamian
Panahandeh N, et al. Restor Dent Endod. 2017 Nov;42(4):309-315. https://doi.org/10.5395/rde.2017.42.4.309