Green hydrogen constitutes a strategic energy vector for achieving the Sustainable Development Goals (SDGs 7, 9, 12, and 13) due to its high energy density, flexibility for renewable energy storage, and direct emission-free operation. However, its production critically depends on the supply of high-purity water, which is unsustainable in the context of a projected 40% global water deficit by 2030. Given that more than 97% of available water is saline, integrating desalination processes with electrolysis constitutes an essential strategy for transitioning toward circular economy models in water resource management. This work presents the conceptual design, detailed modeling, and optimization of an integrated process for the sustainable production of green hydrogen from saline water. The system couples a desalination technology (Solar Distillation) with two electrolysis technologies (AEL and SOEC), modeled through physicochemical, electrochemical, and thermodynamic principles. The objective is to determine technological configurations, materials, and operating conditions that maximize the energy efficiency and minimize the LCOH, contributing to the development of viable routes within the energy transition and circular economy. The results shows that the viability of a integrated Seawater Green Hydrogen system with a detail model is possible. In contrast to black-box models, this model yielded a detailed, geometrically accurate simulation that captures phenomenological effects. It enables the development of processes that contribute to the energy transition, reduce freshwater consumption, and assess their economic viability. The sensitivity analysis revealed promising solutions, with LCOH values ranging from 4.22 to 7.10 USD/kg and overall energy efficiencies between 67% and 82%.
Oily substances (oils, greases, lubricants, etc.) are among the most persistent pollutants for water. They mix with water to form emulsions that contaminate large volumes. Therefore, this project evaluated the use of porous systems (polyurethane foam) modified with polydimethylsiloxane-modified silica (SiO2/DMS) hybrid ceramics as filtration membranes at the laboratory scale for vegetable oil. The polyurethane foam was modified using sol solutions with various SiO2/PDMS ratios obtained via the sol–gel method. Tetraethyl-orthosilicate (TEOS) was used as the silica precursor. Three different polydimethylsiloxane chains were employed as the organic fragment: polydimethylsiloxane hydroxyl terminated (DMS-CH3), aminopropyl-terminated polydimethylsiloxane (DMS-N), and copolymer polydiphenylsiloxane-polydimethylsiloxane hydroxyl terminated (PDS). The siloxane chain was added at a concentration of 20–40% w/w. The modification of the porous system was determined using different characterization techniques, including infrared spectroscopy, which was used to observe the main functional groups. Optical microscopy and SEM were used to identify the hybrid ceramic deposited into the pore structure of the polyurethane sponge. Contact angle measurements revealed the hydrophobic character of the modified material. The removal capacity was evaluated by using vegetable oil as a representative oily contaminant, with values ranging from 43.42 to 96.78 g of oil per gram of adsorbent. In the case of gasoline, removal capacities between 27 and 54 g were observed. This study demonstrated the influence of hydrophobicity on vegetable oil removal, confirming that higher hydrophobicity leads to greater adsorption capacity. Nevertheless, the use of a viscous contaminant introduced challenges in the extraction process from the PS/SiO2-DMS system. Despite this limitation, the material maintained adequate removal performance for up to five reuse cycles. On the other hand, the removal capacity depends on the amount of polysiloxane chain in the ceramic, as well as the functional group, exhibiting the following behavior: DMS-N < DMS-CH3 < PDS. This study demonstrates that hydrophobicity is a key property for enhancing the removal capacity of oily substances. Moreover, the control of intermolecular interactions further strengthens this effect, as evidenced in the PS/SiO2–PDS system.
31 December 2022 in Revista de Ingeniería Biomédica y Biotecnología
The study of the gyroscope method, facial expressions and mental commands using the Emotiv Epoc+ headset for driving indicator led is presented. The analog electrical signal provided by the inertial gyroscope located in the Emotiv headset, with the XY angular displacement and PITCH and JAW rotation, as well as the electrical pulses of cranial nerve VII associated with facial expressions and finally the extraction of the EEG signal acquired from the user's brain, are used to activate the output of indicator leds by developing a control program using Xavier Control Panel, Xavier Emokey and Visual Studio software. The electrical activation by means of the Emotiv Epoc+ headset favors several applications that can be explained with the leds and Arduino nano board interface.