Sm₂TM₁₇ sintered magnets (TM = Co, Fe, Cu, Zr) are utilised in high-temperature rotor applications due to their stable magnetic properties at elevated temperatures of 200–350 °C. However, Sm and Co are critical elements, and the reliance on virgin material supply chains must be reduced. Hydrogen decrepitation (HD) could facilitate magnet-to-magnet recycling of scrap material, but the milling characteristics of the powders generated by HD requires investigation. Sm₂TM₁₇ sintered magnets were exposed to 18 bar and 2 bar hydrogen pressure at 100 °C for 72 h and then knife-milled, roller ball-milled, and planetary ball-milled for varying milling times utilising a variety of surfactants. The particle size and morphology of the powders were investigated, and sintered magnets manufactured from chosen powders were characterised in terms of composition, density, microstructure, and magnetic properties. Knife milling for two minutes showed major particle size reductions of 70 and 82% in D50 for 18 bar and 2 bar samples respectively. Roller ball milling trials showed that a cyclohexane and oleic acid mixture was the most effective at reducing particle size, reducing D10, 50, and 90 by 92, 91, and 80% respectively. Knife milling HD powder for two minutes and then planetary ball milling this powder in a cyclohexane and 1 wt.% oleic acid mixture generated a particle size distribution of 1.3–6.8 µm. This powder formed a sintered compact with a density 0.08 g/cm³ lower than the as-received material. Sm losses due to oxidation and sublimation in addition to carbon impurities from surfactant usage caused the precipitation of an α-Fe/Co phase and formed ZrC phases respectively. Sm-hydride additions of 2–3 wt.% mitigated the formation of the α-Fe/Co phase, but ZrC phases remained and likely prevented cell structure formation and inhibited domain wall pinning in recycled magnets.

Sm₂TM₁₇ sintered magnets, (where TM = Co, Fe, Cu, Zr), are typically utilised in high temperature magnetic applications due to their magnetic properties being very stable at 200–350 °C. Sm and Co are critical materials and need to be recycled to reduce reliance on virgin material supply chains. This work explored HD processing of Sm₂TM₁₇ sintered magnet production scrap as a potential recycling technique. Sintered magnet scrap was initially analysed compositionally, microstructurally and magnetically to determine issues with magnet quality. Scrap material was then HD processed at 18 bar and 2 bar at temperatures between 25–300 °C. The resultant material was characterised in terms of hydrogen content, particle size, degassing behaviour and unit cell expansion. Production scrap magnets exhibited irregular demagnetisation traces with poor domain wall pinning behaviour. Non-magnetic ZrC inclusions likely prevented cell structure formation locally and hence were poor domain wall pinning sites. Scrap material processed at 18 bar and 2 bar required temperatures of 100 °C to allow for the greatest extent of HD reaction, reaching 0.299 Wt.% and 0.323 Wt.% hydrogen respectively. The HD behaviour of production scrap material was comparable to commercial grade magnets. Therefore, HD is a potentially viable technique for recycling Sm₂TM₁₇ sintered magnet production scrap.