H.S. Kim

Dr. H.S. Kim

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 November 2018 in Atmosphere
Verified
Journal Article
Open access
PDF file
HKH.S. Kim
H.S. Kim
TKTeakjo Ko
Teakjo Ko
HJHyangseon Jeong
Hyangseon Jeong
SYSungje Ye
Sungje Ye
The objective of this study was to establish a method to calibrate a large-scale laboratory rainfall simulator through developing and implementing an automated rainfall collection system to assess the reliability and accuracy of a rainfall simulator. The automated rainfall collection system was designed to overcome the limitations caused by the traditional manual measurement for obtaining the rainfall intensity and the spatial rainfall distribution in a large experimental area. The developed automated rainfall collection system was implemented to calibrate a large-scale laboratory rainfall simulator. The adequacy of average rainfall intensities automatically collected from the miniature tipping bucket rain gauges was assessed by comparison with those based on the volumetric method using the flowmeter. The functional relationships between the system variables of the rainfall simulator and the simulated intensity and uniformity distribution of rainfall (i.e., operation models) were derived based on a multiple regression approach incorporating correlation analysis on linear and logarithm scales, with consideration of a significance level. The operation models exhibited high accuracy with respect to both the rainfall intensity and the uniformity coefficients.

1 May 2019
Verified
Conference Paper
Closed access
KPKwon-Sik Park
Kwon-Sik Park
BSByuong-Jun Seo
Byuong-Jun Seo
KJKwang-Rae Jo
Kwang-Rae Jo
JHJin-Yong Heo
Jin-Yong Heo
HKH.S. Kim
H.S. Kim
ENEui-Cheol Nho
Eui-Cheol Nho
This Paper proposes a current controller design method of grid connected inverter using an LCL filter without damping method. In case of a grid side current control, it is not necessary for the system to use the damping method if the ratio of the LCL filter resonant frequency to a system sampling frequency is larger than 1/6. However, if the grid impedance is changed, it is not sure whether the system is in the stable region or not. If an LPF (Low Pass Filter) is used in the feedback path of the system, the stable region of the inverter system can be expanded. This paper proposes a new current controller using the LPF in the feedback path. The proposed controller uses the HC (Harmonic Compensator) in order to improve the grid current quality. The validity of the proposed method is verified through simulation.

2 July 2025 in Journal of Flood Risk Management
Verified
Journal Article
Open access
HKH.S. Kim
H.S. Kim
HKHojun Keum
Hojun Keum
A laboratory‐based physical modeling environment has great potential to reproduce the complex physical hydrologic phenomena and understand the interactions of rainfall‐runoff processes in a visual and informative manner. In this study, a three‐layer physical modeling environment was developed to represent the dynamics of runoff production from the urban drainage system. The three‐layer physical modeling environment consists of a rainfall simulator (the 1st layer), a surface drainage network (the 2nd layer) and a subsurface rainwater pipe network (the 3rd layer). The degree of homogeneity of the spatial rainfall distribution produced by the rainfall simulator ranged from 78.6% to 84.0%, which lies within an acceptable range in the rainfall uniformity. The physical catchment model accurately represented the dynamic characteristics of the catchment response in a natural system associated with differing rainfall intensities within a controlled laboratory modeling environment, particularly the magnitude, volume, and shape of the discharge hydrographs. The three‐layer physical modeling setup was implemented to identify the effects of stormwater management facilities such as the rooftop detention storage and the permeable road pavement on the urban rainfall‐runoff responses. The runoff reduction rates for the peak discharge and the total discharge volume showed a strong linearity with the percentage coverages of the stormwater management facilities. Functional relationships between the variables were established to provide intuitive criteria for the runoff reduction rates for a specific coverage percentage of the rooftop detention storage and the permeable road pavement. These results demonstrate the effectiveness of the three‐layer physical setup for modeling rainfall‐runoff processes within the urban drainage network.