The objective of this study was to establish a method to calibrate a large-scale laboratory rainfall simulator through developing and implementing an automated rainfall collection system to assess the reliability and accuracy of a rainfall simulator. The automated rainfall collection system was designed to overcome the limitations caused by the traditional manual measurement for obtaining the rainfall intensity and the spatial rainfall distribution in a large experimental area. The developed automated rainfall collection system was implemented to calibrate a large-scale laboratory rainfall simulator. The adequacy of average rainfall intensities automatically collected from the miniature tipping bucket rain gauges was assessed by comparison with those based on the volumetric method using the flowmeter. The functional relationships between the system variables of the rainfall simulator and the simulated intensity and uniformity distribution of rainfall (i.e., operation models) were derived based on a multiple regression approach incorporating correlation analysis on linear and logarithm scales, with consideration of a significance level. The operation models exhibited high accuracy with respect to both the rainfall intensity and the uniformity coefficients.
31 October 2019 in Journal of the Korean Society of Hazard Mitigation
Landslides that occur near residential regions are most commonly a result of shallow slope failure, which takes place as a consequence of heavy rainfall during the monsoon season, causing loss to human life and property. In this study, the characteristics of the volumetric water content (VWC) gradient were analyzed to predict shallow slope failure which was reproduced based on flume experiments performed at various slope conditions. The VWC gradient values were calculated for each measurement position and slope depth. Moreover, the VWC gradient characteristics during the occurrence and nonoccurrence of shallow slope failures were compared to those of an actual site that did not undergo slope failure. Our results show that the probability of failure increases with an increase in the VWC gradient value. Additionally, early warning criteria are proposed by dividing the range of the VWC gradient value into four stages in which the failure rate rapidly increased. Full-scale flume experiments were performed to simulate an actual site in terms of its scale, and the appropriate sensor installation positions were proposed to effectively predict the probability of failure.
28 February 2021 in Journal of the Korean Society of Hazard Mitigation
This paper describes the Measurement Management Criteria (MMC) of a soil slope failure based on displacement using literature reviews, small-scale experiments, large-scale experiments, and field data. Two types of measurement management criteria were developed, i.e., short-term criteria for slopes under construction or requiring urgent measurements, and long-term criteria for slopes under continuous management. First, the measurement criteria for the short term were determined based on small- and-large scale experiments, and were determined to be “1 mm/min for the watch level,” “4 mm/min for the caution level,” and “21 mm/min for the alert level.” Next, the criteria for the long term were determined through a literature review and field data, and were “2 mm/day for the watch level,” “8 mm/day for the caution level,” and “56 mm/day for the alert level”.