Material mixtures offer new possibilities for synthesizing coating materials with tailored optical and mechanical properties. We present experimental results on mixtures of , , and , pursuing applications in UV coating technology, while the mixtures are prepared by magnetron sputtering, ion beam sputtering, plasma ion-assisted deposition (PIAD), and electron beam evaporation without assistance. The properties investigated include the refractive index, optical gap, thermal shift, and mech anical stress. The first high reflectors for UV applications have been deposited by PIAD.
We measured the free Brownian motion of individual spherical and the Brownian rotation of individual nonspherical micrometer-sized particles in rarefied gas. Measurements were done with high spatial and temporal resolution under microgravity conditions in the Bremen drop tower so that the transition from diffusive to ballistic motion could be resolved. We find that the translational and rotational diffusion can be described by the relation given by Uhlenbeck and Ornstein [ Phys. Rev. 36, 823 (1930)]. Measurements of rotational Brownian motion can be used for the determination of the moments of inertia of small particles.
Reactive magnetron sputtering processes have gained considerable interest for the production of precision optical coatings. Pulsed sputtering techniques allow the deposition of high quality optical materials at high deposition rates. However, under high throughput conditions and with tight spectral tolerances, process stabilization has to be included in the fabrication process. Normally, pulsed magnetron sputter techniques are typically characterized by a low ionization. Very recently, ionized magnetron sputtering techniques are under investigation, where either the reactive gas or the metallic sputtered particles are highly ionized. Plasma assisted reactive magnetron sputtering ("PARMS") using an additional plasma source or the high pulse power magnetron sputtering ("HiPIMS" or "HPPMS") can be applied therefore. The present paper gives results of film properties of optical materials obtained with these ionized magnetron sputtering techniques and discusses potentials of the techniques for the use with precision optics.