Maurizio Vretenar

Dr. Maurizio Vretenar

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 November 2021 in Instruments
Verified
Journal Article
Open access
PDF file
TTToms Torims
Toms Torims
GPGuntis Pikurs
Guntis Pikurs
SGSamira Gruber
Samira Gruber
MVMaurizio Vretenar
Maurizio Vretenar
ARAndris Ratkus
Andris Ratkus
FBFrank Brückner
Frank Brückner
Continuous developments in additive manufacturing (AM) technology are opening up opportunities in novel machining, and improving design alternatives for modern particle accelerator components. One of the most critical, complex, and delicate accelerator elements to manufacture and assemble is the radio frequency quadrupole (RFQ) linear accelerator, which is used as an injector for all large modern proton and ion accelerator systems. For this reason, the RFQ has been selected by a wide European collaboration participating in the AM developments of the I.FAST (Innovation Fostering in Accelerator Science and Technology) Horizon 2020 project. The RFQ is as an excellent candidate to show how sophisticated pure copper accelerator components can be manufactured by AM and how their functionalities can be boosted by this evolving technology. To show the feasibility of the AM process, a prototype RFQ section has been designed, corresponding to one-quarter of a 750 MHz 4-vane RFQ, which was optimised for production with state-of-the-art laser powder bed fusion (L-PBF) technology, and then manufactured in pure copper. To the best of the authors’ knowledge, this is the first RFQ section manufactured in the world by AM. Subsequently, geometrical precision and surface roughness of the prototype were measured. The results obtained are encouraging and confirm the feasibility of AM manufactured high-tech accelerator components. It has been also confirmed that the RFQ geometry, particularly the critical electrode modulation and the complex cooling channels, can be successfully realised thanks to the opportunities provided by the AM technology. Further prototypes will aim to improve surface roughness and to test vacuum properties. In parallel, laboratory measurements will start to test and improve the voltage holding properties of AM manufactured electrode samples.

17 May 2024 in Physical Review Accelerators and Beams
Verified
Journal Article
Open access
PDF file
TRTobia Romano
Tobia Romano
GPGuntis Pikurs
Guntis Pikurs
ARAndris Ratkus
Andris Ratkus
TTToms Torims
Toms Torims
NDNicolas Delerue
Nicolas Delerue
Maurizio VedaniMaurizio Vedani
Maurizio Vedani
Metal additive manufacturing technologies are rapidly becoming an integral part of the advanced technological portfolio for the most demanding industrial applications. These processes are capable of fabricating three-dimensional components with near-net shape quality by depositing the constituent materials in a layer-by-layer fashion. This fabrication approach provides numerous advantages over conventional manufacturing methods, including enhanced design flexibility, reduced production costs and lead times, rapid prototyping, and the possibility to repair damaged parts. In recent years, the growing demand for novel accelerator components with improved performance characteristics, integrating structures such as drift tubes and internal cooling channels, has prompted the exploration of additive manufacturing in the field of particle accelerators. Radio-frequency components, beam intercepting devices, and vacuum systems have been prototyped using various metallic materials and additive manufacturing technologies, demonstrating performance levels comparable to the conventionally manufactured counterparts in preliminary tests. However, the absence of established qualification protocols and the uncertain reliability of additively manufactured parts under the demanding conditions typical of accelerator applications pose significant challenges to the integration of additive manufacturing processes into the fabrication practices of these components. This paper provides a comprehensive review of documented applications of metal additive manufacturing in particle accelerators, highlighting benefits, challenges, and opportunities for future improvements. The main requirements and currently available test setups for the assessment of additively manufactured components in applications involving ultrahigh vacuum and intense electromagnetic fields are also discussed. Published by the American Physical Society 2024

24 May 2024 in Health and Technology
Verified
Journal Article
Open access
PDF file
MVMaurizio Vretenar
Maurizio Vretenar
EBElena Benedetto
Elena Benedetto
Purpose: This article summarises the presentation given at the “Hadrontherapy: status and perspectives” event. Methods: Structure, methodology, and objectives of the Next Ion Medical Machine Study collaboration are introduced. Its four Work Packages are: small synchrotrons for particle therapy, curved superconducting magnets for synchrotrons and gantries, superconducting gantry design, and high-frequency ion linacs. Synchrotrons under study include a superconducting design for carbon ion therapy, and a normal-conducting design for ions up to helium. Superconducting magnet R&D is carried out in two European projects. Within the scope of these projects, five magnet demonstrators with different technologies are in different phases of design and production. Beam optics and mechanical design of a superconducting gantry for carbon ions is being developed. A high-frequency linac design has been completed, and tests are starting on a prototype high-frequency injector. Results: The designs of two facilities based on NIMMS technological developments are presented. A carbon ion research and therapy facility was designed for the SEEIIST project, based on a conventional synchrotron with high beam intensity. A smaller facility aimed at cancer therapy and research with light ions, in particular helium beams has also been designed. Both facilities can produce FLASH-type beams. Conclusions: The traditional design of carbon ion therapy facilities can be improved by adding new features as higher beam intensity and new beam extraction schemes. A cost-effective alternative to the traditional design is a compact facility for light ions, exploiting the potential for treatment with helium ions and allowing an experimental programme with different ion species.

7 March 2026 in Instruments
Verified
Journal Article
Open access
PDF file
LNLazar Nikitovic
Lazar Nikitovic
MVMaurizio Vretenar
Maurizio Vretenar
TTToms Torims
Toms Torims
The increasing demand for ion beams heavier than protons—particularly carbon and helium ions—for cancer therapy has driven the development of advanced accelerator technologies. Although proton therapy is well established, its physical properties limit its effectiveness against certain tumor types, thereby motivating the use of ions with higher linear energy transfer (LET) and greater biological effectiveness. This study presents the design of an Alvarez-type linear accelerator configuration that combines a Quasi-Alvarez Drift Tube Linac (QA-DTL) and a conventional Alvarez Drift Tube Linac (DTL). The proposed systems are intended for accelerating and injecting carbon or helium ions into a cancer therapy synchrotron, as well as accelerating helium ions for radioisotope production. The optimized QA-DTL and DTL structures provide a versatile and efficient solution for future particle therapy facilities, addressing the growing demand for compact, high-performance, and multifunctional accelerator systems. The proposed linac configurations are designed to operate at 352.2 MHz and consist of three sections. For accelerating low-velocity ions, the first section is a QA-DTL, which is the only section powered during the injection of carbon or helium ions (depending on configuration) into the therapy synchrotron at the energy of 5 MeV/u. The QA-DTL is followed by two DTL cavities forming the second and third sections, which further accelerate helium ions to energies of up to 7.1 MeV/u and 10 MeV/u, respectively. The energy of 7.1 MeV/u is chosen because it represents the production threshold of 211At, one of the most promising alpha emitters for targeted alpha therapy.

25 May 2016 in Physics Education
Verified
Journal Article
Closed access
PDF file
XVXabier Cid Vidal
Xabier Cid Vidal
RCRamon Cid
Ramon Cid
MVMaurizio Vretenar
Maurizio Vretenar
The LHC is the last element of CERN's accelerator complex, which is a succession of machines with increasingly higher energies. Everything starts in the 50 MeV linear accelerator (LINAC2), but a new linear accelerator, the 160 MeV LINAC4, will replace LINAC2 in 2018, upgrading LHC injectors to higher intensity and eventually increasing the luminosity of LHC. The aim of this article is briefly introducing this new accelerator, and presenting a simple application of some fundamental laws of magnetism to be taken to the secondary school classrooms.

1 January 2007
Verified
Conference Paper
Closed access
FGF. Gerigk
F. Gerigk
NAN. Alharbi
N. Alharbi
MPM. Pasini
M. Pasini
SRS. Ramberger
S. Ramberger
MVMaurizio Vretenar
Maurizio Vretenar
RWR. Wegner
R. Wegner
Linac4 is proposed to replace the existing proton linac at CERN (Linac2). Using an increased injection energy of 160 MeV instead of 50 MeV, Linac4 is expected to double the beam intensity in the PS Booster (PSB) and will thus be the first step towards higher brightness beams in the LHC. In this paper we re-assess the choice of RF structures for Linac4. Different accelerating structures for different energy ranges are compared in terms of RF efficiency, ease of construction and alignment, and necessary infrastructure. Eventually we present the final choice for Linac4.