Letian Zhang

Mr. Letian Zhang

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2024 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
BWBoyi Wang
Boyi Wang
YWYingchun Wu
Yingchun Wu
LZLetian Zhang
Letian Zhang
XHXinyuan Huang
Xinyuan Huang
XGXiang Dong Guo
Xiang Dong Guo
XWXuecheng Wu
Xuecheng Wu
The ice crystal icing in aero-engines poses a significant threat to aircraft flight safety, and investigating the correlation between ice crystal size and velocity in icing wind tunnels is essential for correlating ground tests with flight conditions. In this paper, a digital holographic particle tracking velocimetry system is developed and integrated with an icing wind tunnel, and the ice crystal size and velocity are simultaneously measured in experiments at four different wind speeds. The velocity difference between the ice crystal and wind has been experimentally observed, and it increases with both the ice crystal size and wind speed. The normalized velocities of the ice crystals by the wind speeds decrease with size, and the maximum velocity difference in the experiments reaches 28% of the wind speed. Additionally, quantitative correlations between ice crystal size and normalized velocity based on the power function and polynomial model are established. The relationship between the particle Reynolds number of ice crystal and size is also analyzed, resulting in the development of a model based on the power function, and the power index ranges from 1.51 to 1.64. These findings will provide valuable assistance in the calibration and commissioning of the ice crystal simulation system in icing wind tunnels, as well as in exploring the correlation between ground icing tests and flight and in developing corresponding models.

13 November 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
YWYingchun Wu
Yingchun Wu
LZLetian Zhang
Letian Zhang
BWBoyi Wang
Boyi Wang
XLXiaodan Lin
Xiaodan Lin
XHXinyuan Huang
Xinyuan Huang
XWXuecheng Wu
Xuecheng Wu
Instruments for icing cloud particle characterization are prerequisite for icing wind tunnels in icing physics research and aviation certification. Yet it is challenging to measure the multiple parameters of the multiscale and multiphase icing cloud particles, especially under the extremely hostile environment. To address this issue, a holographic airborne for cloud particle imager (HACPI) has been developed for icing cloud measurement. With the merit of three-dimensional imaging of holography, HACPI has the capability of simultaneously measuring particle morphology, size distribution, median volume diameter (MVD) and liquid water content (LWC), with a graphical user interface (GUI) software for remote control and real-time processing through parallel reconstruction. Aerodynamic simulations indicate relatively uniform flow characteristics within a sampling depth of 46 mm. The developed HACPI is applied to three industrial icing wind tunnels with test section scales ranging from 0.6 m × 0.6 m to 3.0 m × 2.0 m. The elaborative designs of optical-mechanical-electronic-thermal integrations evidenced HACPI’s robust performance in high speed wind up to ~200 m/s and low static temperature down to -30°C. Results show that HACPI can accurately measure the icing clouds in the Code of Federal Regulations Title 14 Part 25 Appendix C, the bimodal supercooled large droplet conditions in Appendix O, and the ice crystals in the Code of Federal Regulations Title 14 Part 33 Appendix D, with accuracies verified by side-by-side comparisons to certificated commercial instruments. HACPI has demonstrated to be a powerful instrument for icing cloud measurement in icing wind tunnels, and can be extended to other ground simulation facilities as well as aviation certification.

1 June 2026 in Physics of Fluids
Verified
Journal Article
Closed access
FTFan Tang
Fan Tang
LZLetian Zhang
Letian Zhang
BWBoyi Wang
Boyi Wang
YWYingchun Wu
Yingchun Wu
XWXuecheng Wu
Xuecheng Wu
XSXiaoming Song
Xiaoming Song
Accurate icing wind tunnel testing of aircraft under supercooled large droplets (SLD) conditions necessitates a precise understanding of the velocity slip between droplets and the freestream airflow. This study presents an experimental investigation into the size–velocity correlation in the Chengdu Aircraft Industrial Corporation icing wind tunnel, utilizing a high-speed split-type microscopic shadowgraphic particle tracking velocimetry system operating at 50 kHz. To facilitate automated analysis, a You Only Look Once (YOLOv11x-p2) deep-learning model is employed to automatically identify and filter defocused droplets. This approach enables high-precision sizing and tracking through Kalman filtering. Quantitative analysis reveals a significant inverse exponential correlation between droplet diameter and velocity. SLD demonstrate substantial velocity deficits due to inertial effects, asymptotically stabilizing at approximately 70% of the local freestream velocity. Through dimensionless analysis, the study establishes that the particle Reynolds number (Rep) and Weber number (We) scale positively with droplet diameter, spanning the transition regime from surface-tension dominance to inertia-dominated flow. A novel dimensionless parameter, DN, that incorporates a deformation-corrected drag coefficient is proposed, which successfully collapses velocity data across different wind speeds onto a single master curve. In addition, the KD number allows for the identification of a transition regime, at which the flow physics transitions from a transient dispersed regime to a stable equilibrium regime. These findings provide critical validation data for refining drag models in icing codes and improving collision efficiency predictions required by airworthiness standards.

15 March 2026 in Aerospace
Verified
Journal Article
Open access
PDF file
LZLetian Zhang
Letian Zhang
BWBoyi Wang
Boyi Wang
YWYingchun Wu
Yingchun Wu
SLSi Li
Si Li
ZZZhiqiang Zhang
Zhiqiang Zhang
ZLZhen Liu
Zhen Liu
The cloud spatial uniformity in the test section is crucial for icing wind tunnels in aircraft icing research and airworthiness certification. To achieve uniform supercooled large droplet (SLD) icing conditions, both the spatial variation in droplet size distribution and the concentration should be considered. In this study, the spatial distribution of droplets under three SLD conditions is explored in the Aviation Industry Corporation of China Aerodynamics Research Institute (AVICARI)’s FL-61 icing wind tunnel. Measurements are conducted at 12 test points in vertical and horizontal directions using the holographic airborne cloud particle imager (HACPI) in conjunction with a two-axis traversing system. The droplet images obtained at specific test points below the test section centerline show deformation phenomena for droplets larger than 400 μm. Additionally, the aspect ratio of deformed droplets increases with droplet size. The spatial evolution of the median volume diameter (MVD) and liquid water content (LWC) is examined. For two spray arrangements where the activated nozzles are positioned close, the test point where the LWC peak in the vertical direction occurs is higher than that of the MVD peak. Further analysis focuses on the size distribution of droplets in the vertical direction. The results show that the settling effect of the droplets larger than 50 μm is evident under a flow velocity of 78 m/s. Meanwhile, the position where large droplets tend to appear lowers as the droplet size increases. Finally, the spatial uniformity of droplet size distributions at the same radial distance is discussed.

19 September 2022 in arXiv
Verified
Preprint
Open access
PDF file
LZLetian Zhang
Letian Zhang
JWJinping Wang
Jinping Wang
LJLu Jie
Lu Jie
NCNanjie Chen
Nanjie Chen
XTXiaojun Tan
Xiaojun Tan
ZDZhifei Duan
Zhifei Duan
LiDAR odometry is one of the essential parts of LiDAR simultaneous localization and mapping (SLAM). However, existing LiDAR odometry tends to match a new scan simply iteratively with previous fixed-pose scans, gradually accumulating errors. Furthermore, as an effective joint optimization mechanism, bundle adjustment (BA) cannot be directly introduced into real-time odometry due to the intensive computation of large-scale global landmarks. Therefore, this letter designs a new strategy named a landmark map for bundle adjustment odometry (LMBAO) in LiDAR SLAM to solve these problems. First, BA-based odometry is further developed with an active landmark maintenance strategy for a more accurate local registration and avoiding cumulative errors. Specifically, this paper keeps entire stable landmarks on the map instead of just their feature points in the sliding window and deletes the landmarks according to their active grade. Next, the sliding window length is reduced, and marginalization is performed to retain the scans outside the window but corresponding to active landmarks on the map, greatly simplifying the computation and improving the real-time properties. In addition, experiments on three challenging datasets show that our algorithm achieves real-time performance in outdoor driving and outperforms state-of-the-art LiDAR SLAM algorithms, including Lego-LOAM and VLOM.