Luohaoran Wang

Mr. Luohaoran Wang

orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2026 in Polymers
Verified
Journal Article
Open access
PDF file
LWLuohaoran Wang
Luohaoran Wang
JHJacob Harris
Jacob Harris
Steven Ugo MamoloSteven Ugo Mamolo
Steven Ugo Mamolo
SGSangharsha Gharat
Sangharsha Gharat
AZAli Zolali
Ali Zolali
MBMihaela Banu
Mihaela Banu
Fast-curing polyurethane (PU) systems are attractive for high-throughput manufacturing, but quantifying cure kinetics, gelation, and cure-dependent glass transition temperature (Tg) is difficult, especially at a low degree of cure (DoC). Here, a fast-reacting BASF PU formulation was studied using non-isothermal differential scanning calorimetry (DSC) at multiple heating rates, rheometry at 50 °C, and molecular dynamics (MD) simulations to extend Tgα in the low-DoC regime. DSC provided reaction enthalpy and conversion histories, and Kamal–Sourour (KS) parameters were identified by robust nonlinear fitting, reproducing conversion and curing rate profiles (R2 > 0.99 and >0.95). Rheology indicated gelation between 475 and 625 s (DoC ≈ 0.53), and DSC-based Tg at uncured, gelation, and fully cured states, established the experimental Tg trend. MD (LAMMPS) with topological crosslinking and NPT thermal scans extracted Tg from density–temperature slopes at selected DoC points. Experimental and MD Tg data were fused with Gaussian process regression constrained by the DiBenedetto relationship (5-fold cross-validation), giving λ ≈ 0.29 and confidence intervals. This framework links kinetics, gelation, and Tg evolution for fast-curing PU and identifies the low-DoC region as the main source of uncertainty.

2 February 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
LWLuohaoran Wang
Luohaoran Wang
JHJacob Harris
Jacob Harris
Steven Ugo MamoloSteven Ugo Mamolo
Steven Ugo Mamolo
SGSangharsha Gharat
Sangharsha Gharat
ATAlan Taub
Alan Taub
MBMihaela Banu
Mihaela Banu
Fast-curing polyurethane (PU) systems are attractive for high throughput manufacturing, but quantifying cure kinetics, gelation, and cure-dependent glass transition temperature (Tg) is difficult, especially at low degree of cure (DoC). Here, a fast-reacting BASF PU formulation was studied using non-isothermal differential scanning calorimetry (DSC) at multiple heating rates, rheometry at 50 °C, and molecular dynamics (MD) simulations to extend Tg(α) in the low-DoC regime. DSC provided reaction enthalpy and conversion histories, and Kamal–Sourour (KS) parameters were identified by robust nonlinear fitting, reproducing conversion and curing-rate profiles (R² > 0.99 and > 0.95). Rheology indicated gelation at ~550–600 s (DoC ≈ 0.53), and DSC-based Tg at uncured, gelation, and fully cured states established the experimental Tg trend. MD (LAMMPS) with topological crosslinking and NPT thermal scans extracted Tg from density–temperature slopes at selected DoC points. Experimental and MD Tg data were fused with Gaussian process regression constrained by the DiBenedetto relationship (5-fold cross-validation), giving λ ≈ 0.28 and confidence intervals. This framework links kinetics, gelation, and Tg evolution for fast-curing PU and identifies the low-DoC region as the main source of uncertainty.

Verified
Journal Article
Open access
PDF file
ASAbhishek Singh
Abhishek Singh
LWLuohaoran Wang
Luohaoran Wang
ZMZixuan Mu
Zixuan Mu
MBMihaela Banu
Mihaela Banu
Material Extrusion (MEX)-based Additive Manufacturing (AM), particularly metal Fused Filament Fabrication (FFF), has gained attention for fabricating metal components due to its operational simplicity, cost-effectiveness, design flexibility, and reduced material waste. Compared with laser powder bed fusion, metal FFF offers lower thermally induced residual stress and avoids direct powder handling. However, dimensional accuracy and surface quality remain affected by process variability, shrinkage during sintering, and geometry-dependent material redistribution. Quantitative relationships among geometric features, dimensional deviation, and surface morphology are still limited. This study investigates geometry-dependent dimensional and surface variability in metal FFF parts using two stress-concentrator geometries: a plate with a circular hole and a specimen with a filleted transition. Geometric features, including hole diameter, fillet radius, and local curvature, were evaluated in relation to dimensional variability and surface roughness. The analysis used RMS-based dimensional error, PCA-based roughness indexing, regression, and clustering. The results showed that hole specimens had lower dimensional behavior, with ΔRMS values ranging from approximately 0.790% to 1.606%, whereas fillet specimens exhibited higher variability, with ΔRMS values ranging from 1.140% to 4.086%. Sensitivity analysis showed that the higher variability of the fillet geometry was primarily associated with the local curved transition rather than the specimen’s global dimensions. Regression indicated that surface roughness alone did not explain dimensional variability, while tensile strength provided an additional performance descriptor. Clustering further showed more compact response groupings for the hole specimens and more dispersed groupings for the fillet specimens, indicating the greater geometry sensitivity of the filleted transition. By combining the parameters studied, a framework was developed to provide a quantitative basis for assessing geometry-dependent variability and to support improved design guidelines for metal FFF parts with filleted transitions and stress-concentrating features.

14 April 2026 in Solid State Phenomena
Verified
Journal Article
Open access
PDF file
JHJacob Harris
Jacob Harris
SGSangharsha Gharat
Sangharsha Gharat
LWLuohaoran Wang
Luohaoran Wang
AZAli Zolali
Ali Zolali
ATAlan Taub
Alan Taub
MBMihaela Banu
Mihaela Banu
This work develops and validates thermo-chemical models for pultrusion of glass fiber–reinforced polyurethane composites on an industrial PulFlex production line. A reduced one-dimensional model combining a calibrated Kamal–Sourour (KS) cure law with an Arrhenius type chemo-rheological viscosity formulation is cross-validated against a three-dimensional ANSYS Composite Cure Simulation using identical material inputs along a three-zone, 0.9144 m heated die. Embedded thermocouples provide in-die temperature histories at 50.8 cm·min⁻¹ for calibration, while additional differential scanning calorimetry (DSC) measurements supply degree of cure (DoC) profiles for independent validation. At the industrial operating speed of 50.8 cm·min⁻¹, the mathematical and ANSYS models both reproduce the measured temperature peak location and exit temperature within a few degrees Celsius and predict a die-exit DoC of approximately 0.95, confirming near-complete curing. Using these calibrated fields as inputs to an analytical pulling-resistance formulation, both models predict comparable pulling force magnitudes and plateau behavior, demonstrating that the simplified 1D framework can capture not only thermo-chemical evolution but also process resistance trends over a range of pulling speeds. The validated 1D model therefore enables efficient exploration of speed–temperature–force tradeoffs for process window design, while the 3D ANSYS model provides a higher-fidelity reference for local gradients and future thermo–chemo–mechanical extensions.

29 October 2026 in Journal of Manufacturing Science and Engineering
Verified
Journal Article
Open access
JHJacob Harris
Jacob Harris
LWLuohaoran Wang
Luohaoran Wang
SGSangharsha Gharat
Sangharsha Gharat
LBLouise Batta
Louise Batta
Steven Ugo MamoloSteven Ugo Mamolo
Steven Ugo Mamolo
MBMihaela Banu
Mihaela Banu
Pultrusion of hollow composite profiles with fast‐curing polyurethane (PU) resin requires simultaneous control of heat transfer, cure kinetics, viscosity evolution, and pulling resistance, making empirical process optimization costly and uncertain. This work develops a multifidelity thermo–chemical–mechanical modeling framework for hollow glass‐fiber (GF) and carbon‐fiber (CF)‐reinforced PU profiles produced on an industrial PulFlex pultrusion line. Three complementary model tiers are integrated using a common physics backbone: a one‐dimensional (1D) mathematical model for rapid parametric screening, a two‐dimensional (2D) homogeneous finite element model in ABAQUS for process‐scale response, and a three‐dimensional (3D) laminate‐resolved finite element model in ANSYS for fiber‐architecture and through‐thickness gradient prediction. All models employ Kamal–Sourour cure kinetics, Di Benedetto vitrification, cure‐dependent rheology, and cure‐hardening instantaneously linear elastic modulus evolution to predict temperature, degree of cure, viscosity, glass‐transition temperature, and pulling force along a multizone heated die. Embedded thermocouple measurements are used to calibrate the 1D thermal history and to independently evaluate the 2D and 3D thermal predictions at the reference condition, whereas differential scanning calorimetry‐derived degree‐of‐cure data provide an independent check on cure progression for all three model tiers. The models reveal distinct thermochemical behavior between GF and CF systems and quantify the accuracy‐versus‐cost tradeoff across fidelities. Under the tested three‐zone heater configuration, the multifidelity comparison identifies the speed range over which die‐exit cure, vitrification location, and predicted pulling resistance remain favorable for stable hollow‐profile manufacturing. The calibrated 1D model supports efficient process screening and future digital‐twin integration.